A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon

Jack W. Baker; C. Allin Cornell

doi:10.1002/eqe.474

journal article Jan 01, 2005

A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon

Jack W. Baker C. Allin Cornell

Earthquake Engineering & Structural Dynamics Vol. 34 No. 10 pp. 1193-1217 · Wiley

View at Publisher Save 10.1002/eqe.474

Topics

No keywords indexed for this article. Browse by subject →

References

36

[1]

Shome Earthquake Spectra (1998) 10.1193/1.1586011

[2]

Abrahamson Bulletin of the Seismological Society of America (1988)

[3]

. State of the practice of seismic hazard evaluation. GeoEng 2000. Melbourne, Australia, 2000.

[4]

Abrahamson Seismological Research Letters (1997) 10.1785/gssrl.68.1.94

[5]

Equations for Estimating Horizontal Response Spectra and Peak Acceleration from Western North American Earthquakes: A Summary of Recent Work

D. M. Boore, W. B. Joyner, T. E. Fumal

Seismological Research Letters 1997 10.1785/gssrl.68.1.128

[6]

Cornell PEER Center News (2000)

[7]

Bazzurro Journal of Structural Engineering (1998) 10.1061/(asce)0733-9445(1998)124:11(1281)

[8]

, , . Effects of ground motion uncertainty on predicting the response of an existing RC frame structure. 13th World Conference on Earthquake Engineering. 2004. Vancouver, Canada, 10p.

[9]

, . Choice of a vector of ground motion intensity measures for seismic demand hazard analysis. 13th World Conference on Earthquake Engineering. 2004. Vancouver, Canada, 15p.

[10]

, , , , , . Ground motion evaluation procedures for performance-based design. PEER 2001-09. 2001, Pacific Earthquake Engineering Research Center, University of California at Berkeley: Berkeley, California. 229p.

[11]

, , , . Applied Linear Statistical Models; 4th edn. McGraw-Hill: Boston, 1996; 1408p.

[12]

. Probabilistic Seismic Demand Analysis of Nonlinear Structures. Department of Civil and Environmental Engineering, Stanford University, 1999; 320p. http://www.stanford.edu/group/rms/.

[13]

, . Probabilistic response assessment for building-specific loss estimation. PEER 2003-03. 2003, Pacific Earthquake Engineering Research Center, University of California at Berkeley: Berkeley, California. 49p.

[14]

, . Probability, Statistics, and Decision for Civil Engineers. McGraw-Hill: New York, 1970; 684p.

[15]

, . Vector-valued probabilistic seismic hazard analysis. 7th U.S. National Conference on Earthquake Engineering. 2002, Boston, MA: Earthquake Engineering Research Institute. 1 CD-ROM.

[16]

McGuire Bulletin of the Seismological Society of America (1995) 10.1785/bssa0850051275

[17]

Disaggregation of seismic hazard

Paolo Bazzurro, C. Allin Cornell

Bulletin of the Seismological Society of America 1999 10.1785/bssa0890020501

[18]

. Personal communication, Pacific Gas & Electric Co., San Francisco, California, 2004.

[19]

U.S. Geological Survey Earthquake Hazard Maps. 2002. http://eqhazmaps.usgs.gov/.

[20]

. Probabilistic Seismic Demand Analysis. Department of Civil and Environmental Engineering, Stanford University: Stanford, CA, 1998; 329p. http://www.stanford.edu/group/rms/

[21]

, , , , , , . Engineering characterization of ground motion—Task I: Effects of characteristics of free-field motion on structural response. NUREG/CR-3805. 1984, U.S. Nuclear Regulatory Commission: Washington, D.C.

[22]

. Dynamics of Structures: Theory and Applications to Earthquake Engineering; 2nd edn. Prentice Hall: Upper Saddle River, NJ, 2001; 844p.

[23]

Iwan Earthquake Engineering and Structural Dynamics (1980) 10.1002/eqe.4290080407

[24]

, , . Prediction of inelastic response from elastic response spectra considering localized nonlinearities and soil-structure interaction. 8th SMIRT. 1985, 427-434.

[25]

, , , . Development of a two-parameter seismic intensity measure and probabilistic assessment procedure. The Second U.S.-Japan Workshop on Performance-based Earthquake Engineering Methodology for Reinforced Concrete Building Structures. 2001, Sapporo, Hokkaido. 187-206.

[26]

. Seismic Performance, Capacity and Reliability of Structures as Seen through Incremental Dynamic Analysis. Department of Civil and Environmental Engineering, Stanford University: Stanford, CA, 2002. 152p. http://www.stanford.edu/group/rms/.

[27]

, . Seismic hazard analysis of multi-degree-of-freedom structures. RMS-8. 1990, Reliability of Marine Structures: Stanford, CA. 70p.

[28]

. Probabilistic Seismic Demand Analysis: Spectrum Matching and Design. Department of Civil and Environmental Engineering, Stanford University: Stanford, CA, 2000; 259p. http://www.stanford.edu/group/rms/

[29]

. Geotechnical Earthquake Engineering. Prentice-Hall Civil Engineering and Engineering Mechanics Series. Prentice Hall: Upper Saddle River, NJ, 1996; 653p.

[30]

Van Nuys Hotel Building Testbed Report: Exercising Seismic Performance Assessment. H. Krawinkler, Editor. 2004, Pacific Earthquake Engineering Research Center, University of California at Berkeley: Berkeley, California.

[31]

. Direct Probabilistic Seismic Analysis: Implementing Non-Linear Dynamic Assessments. Department of Civil and Environmental Engineering, Stanford University: Stanford, CA, 2003; 244p. http://www.stanford.edu/group/rms/.

[32]

Pincheira Earthquake Spectra (1999) 10.1193/1.1586040

[33]

, . Seismic Demands for Nondeteriorating Frame Structures and Their Dependence on Ground Motions. John A. Blume Earthquake Engineering Center Report No. 144. Stanford University: Stanford, CA, 2003; 347p.

[34]

. Global Collapse of Frame Structures under Seismic Excitations. Department of Civil and Environmental Engineering. Stanford University: Stanford, CA, 2003; 324p.

[35]

Luco Earthquake Spectra (2005)

[36]

, , , , . Predictors of seismic demand of SMRF buildings considering post-elastic mode shape. 13th World Conference on Earthquake Engineering. 2004. Vancouver, Canada, 15.

Cited By

619

Determination of rational seismic systems for small- and medium-span highway girder bridges using probabilistic performance-based methods and machine learning

Guanya Lu, Weizuo Guo · 2026

Structure and Infrastructure Engine...

Analyzing the Sufficiency of Alternative Scalar and Vector Intensity Measures of Ground Shaking Based on Information Theory

F. Jalayer, J. L. Beck · 2012

Journal of Engineering Mechanics

Vector-valued fragility functions for seismic risk evaluation

Pierre Gehl, Darius M. Seyedi · 2012

Bulletin of Earthquake Engineering

Fragility curves for building envelope components subject to windborne debris impact

A.H. Herbin, M. Barbato · 2012

Journal of Wind Engineering and Ind...

Probabilistic structural response assessment using vector‐valued intensity measures

Jack W. Baker · 2007

Earthquake Engineering & Struct...

Metrics

619

Citations

36

References

Details

Published: Jan 01, 2005
Vol/Issue: 34(10)
Pages: 1193-1217
License: View

Authors

Department of Civil and Environmental Engineering Stanford University Stanford, California 94305-4020

Cite This Article

Jack W. Baker, C. Allin Cornell (2005). A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon. Earthquake Engineering & Structural Dynamics, 34(10), 1193-1217. https://doi.org/10.1002/eqe.474

A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilon

You May Also Like