Experimental data on creep of engineering alloys and phenomenological theories of creep. A review

Yu. N. Rabotnov

doi:10.1007/bf00914390

journal article Jan 01, 1965

Experimental data on creep of engineering alloys and phenomenological theories of creep. A review

Yu. N. Rabotnov

Journal of Applied Mechanics and Technical Physics Vol. 6 No. 1 pp. 137-154 · Pleiades Publishing Ltd

View at Publisher Save 10.1007/bf00914390

Topics

No keywords indexed for this article. Browse by subject →

References

57

[1]

E. L. Robinson, “100 000-hour creep test,” Mech. Engng., vol. 65, no. 3, p. 166, 1943

[2]

V. S. Namestnikov and A. A. Khvostunkov, “Creep of duralumin under constant and variable loads,” PMTF, no. 4, pp. 90–95, 1960.

[3]

Yu. N. Rabotnov and V. P. Rabinovich, “On the strength of discs in creep,” Izv. AN SSSR, OTN, Mekhanika i mashinostr., no. 4, pp. 93–100, 1959.

[4]

V. P. Rainovich, “Experimental investigations of the strength of discs operating in creep at constant temperature,” Tr. Tsentr. n. -i. in-ta tyazh. mash., no. 12, pp. 25–45, 1960.

[5]

F. H. Turner and K. E. Blomquist, “A study of the applicability of RabotnoV's creep parameter for aluminum alloy,” J. Aeronaut. Sci., vol. 23, no. 12, 1956.

[6]

R. M. Goldhoff, “The application of Rabotnov's creep parameter,” Proc. Amer. Soc. Test. Mater., vol. 275, no. 75, 1961.

[7]

N. G. Torshenov, “Creep of aluminum alloy D-16T in compression,” PMTF, no. 6, p. 158–159, 1961.

[8]

J. E. Dorn, “Some fundamental experiments on high-temperature creep,” J. Mech. and Phys. Solids, vol. 3, no. 2, pp. 85–116, 1955. 10.1016/0022-5096(55)90054-5

[9]

S. N. Zhurkov and T. N. Sapfirova, “The relation between the strength and creep of metals and alloys,” Zh. tekhn. fiz., vol. 28, no. 8, pp. 1719–1726, 1958.

[10]

P. Feltham and J. D. Meakin, “On the representation and extrapolation of creep data of metals and technical alloys,” Rheol. acta., vol. 1, no. 2–3, 1953. 10.1007/bf01968862

[11]

S. N. Zhurkov and T. P. Sapfirova, “Time-temperature relationship for the strength of pure metals,” Dokl. AN SSSR, vol. 101, no. 2, 1955.

[12]

F. R. Larson and J. A. Miller, “A time-temperature relationship for rupture and creep stress,” Trans. ASME, vol. 74, 1952. 10.1115/1.4015909

[13]

S. S. Manson and A. M. Haferd, “A linear time-temperature relation for extrapolation of creep and stressrupture data,” Nat. Advis Chi Aeronaut T. N. 2890, 1953.

[14]

F. Garofalo, G. W. Smith and B. V. Royle, “Validity of time-compensated temperature parameters for correlating creep and creep-rupture data,” Trans. ASME, vol. 78, no. 7, 1956.

[15]

E. A. Jenkinson, A. J. Smith, and M. T. Hopkin, “The long-time creep properties of an 18% Cr-12% Ni-1% Nb-steel steampipe and superheater tube,” J. Iron and Steel Inst., vol. 200, p. 12, 1962.

[16]

W. Betteridge, “The extrapolation of the stress-rupture properties of the nomonic alloys,” J. Inst. Metals, Jan., pp. 232, 237, 1958.

[17]

F. J. Claus, “An examination of high-temperature stress-rupture correlating parameters,” Proc, Amer. Soc. Test. Mater., vol. 60, pp. 905–927, 1958.

[18]

N. J. Grant and A. G. Bucklin, “On the extrapolation of short-time stress-rupture data,” Trans. ASME, vol. 42, pp. 720–751, 1950.

[19]

L. Boltzmann, “Zur theorie der elastischen nachwirkun,” Ann. Phys. Chem. Erg., vol. 7, 1876.

[20]

V. Volterra, Fonctions de lignes, Paris, Gauthier Villard, 1913.

[21]

Yu. N. Rabotnov, “Some problems in the theory of creep,” Vestn. Mosk. un-ta, no. 10, 1948.

[22]

M. I. Rozovskii, “Some features of elastic media with memory effects,” Izv. AN SSSR, OTN, Mekhanika i mashinostr., no. 2, pp. 30–36, 1961.

[23]

N. Kh. Arutyunyan, Some Questions of the Theory of Creep [in Russian], Gostekhizdat, 1952.

[24]

H. Leaderman, Elastic and Creep Properties of Filamentous Materials and Other High Polymers, Textile Foundation, Washington D. C., 1943.

[25]

A. E. Johnson, “The creep recovery of a 0. 17 percent carbon steel,” Inst. Mech. Engng J. Proc., vol. 145, no.5, 1941. 10.1243/pime_proc_1941_145_042_02

[26]

V. S. Namestnikov and Yu. N. Rabotnov, “On memory theories of creep,” PMTF, no. 4, pp. 148–150, 1961.

[27]

Zh. S. Erzhanov, “On estimating the stress state of solid rock mass,” Collection: Mathematical Methods in Mining [in Russian], Pt. 2, SO AN SSSR, Novosibirsk, 1963.

[28]

N. I. Malinin, “Creep and relaxation of polymers in the transition state,” PMTF, no. 1, pp. 56–65, 1961.

[29]

H. Leaderman and F. McCrackin, “Large longitudinal retarded elastic deformation of rubber-like networkpolymers,” Trans. Soc. Rheol., vol. 7, 1963. 10.1122/1.548948

[30]

A. Kh. Salli, Creep of Metals and Heat-Resistant Alloys [in Russian], Oborongiz, Moscow, 1953.

[31]

V. N. Danilovskaya, G. M. Ivanova, and Yu. N. Rabotnov, “Creep and relaxation of chrome-molybdenum steels,” Izv. AN SSSR, OTN, no. 5, 1955.

[32]

Yu. P. Kaptelin, “Equations of state for creep of cold-worked copper,” Collection: Proceedings of the Leningrad “Order of Lenin” Institute of Railroad Transportation Engineers [in Russian], no. 192, 1962.

[33]

V. S. Namestnikov, “Creep of aluminum alloy under variable loads,” PMTF, no. 2, pp. 99–105, 1964.

[34]

C. C. Davenport, “Correlation of creep and relaxation properties of copper,” J. Appl. Mech., vol. 60, 1938. 10.1115/1.4008848

[35]

Shuji Taira, “Lifetim of structures subjected to varying load and temperature,” In: Creep in Structures, Springer, pp. 96–124, 1962. 10.1007/978-3-642-86014-0_6

[36]

A. M. Zhukov, Yu. N. Rabotnov, and F. S. Churikov, “Experimental verification of certain theories of creep,” In: Engineering Collection [in Russian], vol. 18, 1953.

[37]

E. T. Onat and T. T. Wang, “The effect of incremental loading on creep behavior of metals,” In: Creep in Structures, Springer, pp. 1250136, 1962. 10.1007/978-3-642-86014-0_7

[38]

N. S. Vilesova and V. S. Namestnikov, “On a certain hardening parameter,” PMTF, no. 3, pp. 177–179, 1964.

[39]

V. S. Namestnikov and Yu. N. Rabotnov, “On a hypothesis of the equation of state of creep,” PMTF, no. 3, pp. 101–102, 1961.

[40]

E. N. da C. Andrade, “On the viscous flow in metals, and allied phenomena,” Proc. Roy. Soc., London, vol. 84, no. A567, 1910. 10.1098/rspa.1910.0050

[41]

S. A. Shesterikov, “A condition relating to the laws of creep,” Izv. AN SSSR, OTN, Mekhanika i mashinostr., no. 1, p. 131, 1959.

[42]

B. F. Shorr, “On the design of nonuniformly heated rods of arbitrary cross section for nonsteady creep,” Izv. AN SSSR, OTN, Mekhanika i mashinostr., no. 1, pp. 89–96, 1959.

[43]

G. I. Bryzgalin, “Creep at variable stresses,” PMTF, no. 3, pp. 73–77, 1962.

[44]

S. T. Mileiko, “Short time creep at variable stresses,” Collection: Creep and Long-Time Strength [in Russian], SOAN SSSR, Novosibirsk, 1963.

[45]

N. J. Hoff, “The necking and rupture of rods subjected to constant tensile loads,” J. Appl. Mech., vol. 20, 1953. 10.1115/1.4010601

[46]

Yu. N. Rabotnov, “On the mechanism of long-time failure,” Collection: Problems in the Strength of Materials and Design [in Russian], Izd-vo AN SSSR, Moscow, 1959.

[47]

L. M. Kachanov, “Time to rupture under conditions of creep,” Izv. AN SSSR, OTN, Mekhanika i mashinostr., no. 5, pp. 88–92, 1960.

[48]

W. Prager, Introduction to Mechanics of Continua [Russian translation], IL, Moscow, 1963.

[49]

L. I. Sedov, Introduction to the Mechanics of Continua [in Russian], Fizmatgiz, 1962. 10.1115/1.3640687

[50]

V. S. Namestnikov, “Creep under variable loads in the complex stress state,” Izv. AN SSSR, OTN, no. 10, pp. 83–85, 1957.

Showing 50 of 57 references

Metrics

11

Citations

57

References

Details

Published: Jan 01, 1965
Vol/Issue: 6(1)
Pages: 137-154
License: View

Authors

Y

Yu. N. Rabotnov

Cite This Article

Yu. N. Rabotnov (1965). Experimental data on creep of engineering alloys and phenomenological theories of creep. A review. Journal of Applied Mechanics and Technical Physics, 6(1), 137-154. https://doi.org/10.1007/bf00914390

Experimental data on creep of engineering alloys and phenomenological theories of creep. A review

You May Also Like