Transient stress relaxation around spherical inclusions by interfacial diffusion and sliding

L. -H. He

doi:10.1007/bf01261667

journal article Mar 01, 2001

Transient stress relaxation around spherical inclusions by interfacial diffusion and sliding

L. -H. He

Acta Mechanica Vol. 149 No. 1-4 pp. 115-133 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/bf01261667

Topics

No keywords indexed for this article. Browse by subject →

References

28

[1]

Clyne, T. W., Withers, P. J.: An introduction to metal matrix composites. Cambridge: Cambridge University Press 1993. 10.1017/cbo9780511623080

[2]

Frost, H. J., Ashby, M. F.: Deformation-mechanism maps. Oxford: Pergamon Press 1982.

[3]

Herring, C.: Surface tension as a motivation for sintering. In: The physics of powder metallurgy (Kingston, W. E., ed.), pp. 143?179. New York: McGraw-Hill 1951.

[4]

Koeller, R. C., Raj, R.: Diffusional relaxation of stress concentration at second phase particles. Acta Metall.26, 1551?1558 (1978). 10.1016/0001-6160(78)90064-0

[5]

Mori, T., Okabe, M., Mura, T.: Diffusional relaxation around a second phase particle. Acta Metall.28, 319?325 (1980). 10.1016/0001-6160(80)90167-4

[6]

Onaka, S., Okada, T., Kato, M.: Relaxation kinetics and relaxed stresses caused by interface diffusion around spheroidal inclusions. Acta Metall.39, 971?978 (1991). 10.1016/0956-7151(91)90297-e

[7]

Mura, T.: Micromechanics of defects in solids. Dordrecht: Martinus Nijhoff 1987. 10.1007/978-94-009-3489-4

[8]

Eshelby, J. D.: The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. Roy. Soc. Lond.A241, 376?396 (1957). 10.1098/rspa.1957.0133

[9]

Mori, T., Huang, J. H., Taya, M.: Stress relaxation by plastic flow, interfacial sliding and diffusion in an inclusion bearing material. Acta Metall.45, 429?438 (1997).

[10]

He, L. H., Zhao, J. H.: Evolution of stresses in composites with rigid inclusions during interface diffusion: a two-dimensional case. Int. J. Engng Sci. (forthcoming). 10.1016/s0020-7225(99)00070-1

[11]

Raj, R., Ashby, M. F.: On grain boundary sliding and diffusional creep. Metall. Trans.2, 1113?1127 (1971). 10.1007/bf02664244

[12]

Ghahremani, F.: Effect of grain boundary sliding on anelasticity of polycrystals. Int. J. Solids Struct.16, 825?845 (1980). 10.1016/0020-7683(80)90052-9

[13]

Ghahremani, F.: Effect of grain boundary sliding on steady creep of polycrystals. Int. J. Solids Struct.16, 847?862 (1980). 10.1016/0020-7683(80)90053-0

[14]

Mura, T., Furuhashi, R.: The elastic inclusion with a sliding interface. J. Appl. Mech.51, 308?310 (1984). 10.1115/1.3167617

[15]

Mura, T., Jasiuk, I., Tsuchida, E.: The stress field of a sliding inclusion. Int. J. Solids Struct.21, 1165?1179 (1985). 10.1016/0020-7683(85)90002-2

[16]

Tsuchida, E., Mura, T., Dunders, J.: The elastic field of an elliptical inclusion with a slipping interface. ASME J. Appl. Mech.53, 103?107 (1986). 10.1115/1.3171693

[17]

Mori, T., Mura, T.: Blocking effect of inclusions on grain boundary sliding; spherical grain approximation. J. Mech. Phys. Solids.35, 631?641 (1997). 10.1016/0022-5096(87)90020-2

[18]

Mori, T., Nakasone, Y., Taya, M., Wakashima, K.: Steady-state creep rate of a composite: two-dimensional analysis. Phil. Mag. Lett.75, 359?365 (1997). 10.1080/095008397179426

[19]

Mori, T., Onaka, S., Wakashima, K.: Role of grain-boundary sliding in diffusional creep of polycrystals. J. Appl. Phys.83, 7547?7552 (1998). 10.1063/1.367519

[20]

Kinetics of stress relaxation caused by the combination of interfacial sliding and diffusion: two-dimensional analysis

S. Onaka, J.H. Huang, K. Wakashima et al.

Acta Materialia 1998 10.1016/s1359-6454(98)00069-x

[21]

Asaro, R. J.: Somigliana dislocations and internal stresses; with application to second phase hardening. Int. J. Engng Sci.13, 271?286 (1975). 10.1016/0020-7225(75)90035-x

[22]

Coble, R. L.: A model for boundary diffusion controlled creep in polycrystalline materials. J. Appl. Phys.34, 1679?1682 (1963). 10.1063/1.1702656

[23]

Mori, T., Tanaka, K.: Average stress in matrix and average energy of materials with misfitting inclusions. Acta Metall.21, 571?574 (1973). 10.1016/0001-6160(73)90064-3

[24]

Weng, G. J.: Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions. Int. J. Engng Sci.21, 845?856 (1984). 10.1016/0020-7225(84)90033-8

[25]

Benveniste, Y.: A new approach to the application of Mori-Tanaka's theory in composite materials. Mech. Mater.6, 147?157 (1987). 10.1016/0167-6636(87)90005-6

[26]

Suo, Z.: Motion of microscopic surfaces in materials. Adv. Appl. Mech.33, 193?294 (1997). 10.1016/s0065-2156(08)70387-9

[27]

Mal, A. K., Singh, S. J.: Deformation of elastic solids. New Jersey: Prentice-Hall 1991.

[28]

Nemat-Nasser, S., Hori, M.: Micromechanics: overall properties of heterogeneous materials. Amsterdam: North-Holland 1993.

Metrics

13

Citations

28

References

Details

Published: Mar 01, 2001
Vol/Issue: 149(1-4)
Pages: 115-133
License: View

Authors

L

L. -H. He

Cite This Article

L. -H. He (2001). Transient stress relaxation around spherical inclusions by interfacial diffusion and sliding. Acta Mechanica, 149(1-4), 115-133. https://doi.org/10.1007/bf01261667

Transient stress relaxation around spherical inclusions by interfacial diffusion and sliding

You May Also Like