Compressive behaviour of concrete at high strain rates

P. H. Bischoff; S. H. Perry

doi:10.1007/bf02472016

journal article Nov 01, 1991

Compressive behaviour of concrete at high strain rates

P. H. Bischoff S. H. Perry

Materials and Structures Vol. 24 No. 6 pp. 425-450 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/bf02472016

Topics

No keywords indexed for this article. Browse by subject →

References

120

[1]

McHenry, D. and Shideler, J. J., ‘Review of data on effect of speed in mechanical testing of concrete’, in ‘Symposium on Speed of Testing of Non-Metallic Materials’ ASTM STP No. 185 (1956) pp. 72–82.

[2]

Abrahamsson, E., ‘Influence of dynamic loads on mechanical properties of concrete’ (summary in English),Nordisk Betong 6(4) (1962) 337–346.

[3]

Properties of materials at high rates of straining or loading

R. J. Mainstone

Matériaux et Constructions 1975 10.1007/bf02476328

[4]

Suaris, W. and Shah, S. P., ‘Mechanical properties of materials subjected to impact’, in ‘Concrete Structures under Impact and Impulsive Loading’, edited by G. Plauk, Introductory Report (BAM, Berlin, 1982) pp. 33–62.

[5]

Ammann, J. W., ‘Stahlbeton und Spannbetontragwerke unter Stossartiger Belastung’ (Reinforced and Prestressed Concrete Structures under Shock Loading), Dissertation No. 7285, Eidgenossischen T.H., Zurich (1983).

[6]

Dargel, H. L., ‘Zur Rechnerischen Analyse von Stahl-betontragwerken unter Stossartiger Beanspruchung: Berucksichtigung des Einfluss hoher Dehngeschwindigkeiten im Werkstoffgesetz’ (Numerical Analysis of Reinforced Concrete Structures under Shock Loading: Consideration of the Effect of Higher Strain Rates on the Constitutive Relationships), Dissertation, T.H. Darmstadt (1984).

[7]

Gerstle, K. H., Linse, D. L., Bertacchi, P., Kotsovos, M. D., Ko, H. Y., Newman, J. B., Rossi, P., Schickert, G., Taylor, M. A., Traina, L. A., Zimmerman, R. M. and Bellotti, R., ‘Strength of concrete under multiaxial stress states’, in Proceedings of Douglas McHenry International Symposium on Concrete and Concrete Structures, ACI Publication SP-55 (1978) pp. 103–131.

[8]

Reinhardt, H. W., ‘Testing and monitoring techniques for impact and impulse loading of concrete structures’, in ‘Concrete Structures under Impact and Impulsive Loading’, edited by G. Plauk, Introductory Report (BAM, Berlin, 1982) pp. 65–87.

[9]

Bresler, B. and Bertero, V. V., ‘Influence of high strain rate and cyclic loading of unconfined and confined concrete in compression’, in Proceedings of 2nd Canadian Conference on Earthquake Engineering, Hamilton, Ontario, 1975, pp. 1–13.

[10]

Kotsovos, M. D., ‘Effect of testing technique on the postultimate behaviour of concrete in compression’,Mater. Struct. 16(91) (1983) 3–12.

[11]

Takeda, J., ‘A loading apparatus for high speed testing of building materials and structures’, in Proceedings of 2nd Japan Congress on Testing Materials, Kyoto (Japan Society for Testing Materials, 1959) pp. 236–238.

[12]

Takeda, J. and Tachikawa, H., ‘The mechanical properties of several kinds of concrete at compressive, tensile, and flexural tests in high rates of loading (in Japanese),Trans. Architect. Inst. Jpn No. 77 (1962) 1–6. 10.3130/aijsaxx.77.0_1

[13]

—Idem,, ‘The mechanical properties and their fundamental equations of concrete subjected to compression in high rates of loading’ (in Japanese),ibid., , No. 78 (1962) 1–6. 10.3130/aijsaxx.78.0_1

[14]

Gopalaratnam, V. S. and Shah, S. P., ‘Instrumented impact testing of brittle materials’, in ‘Engineering Mechanics in Civil Engineering’, edited by A. P. Boresi and K. P. Chong, Vol. 1 (ASCE, New York, 1984) pp. 635–639.

[15]

Watstein, D., ‘Effect of straining rate on the compressive strength and elastic properties of concrete’,ACI J. 49 (1953) 729–744.

[16]

—Idem,, ‘Properties of concrete at high rates of loading’, in ‘Symposium on Impact Testing’, ASTM STP 176 (1955) pp. 156–169.

[17]

Popp, C., ‘Unterschungen über das Verhalten von Beton bei schlagartiger Beanspruchung’ (A study of the behaviour of concrete under impact loading), Deutscher Ausschuss fur Stahlbeton, No. 281 (1977).

[18]

Malvern, L. E. and Ross, C. A., ‘Dynamic response of concrete and concrete structures’, Second Annual Technical Report, AFOSR Contract No. F49620-83-K007 (1985). 10.21236/ada139294

[19]

Gupta, Y. M. and Seaman, L., ‘Local response of reinforced concrete to missile impact’, Final Report, EPRI NP-1217, Project 393-1 (Palo Alto, 1979).

[20]

Eibl, J., ‘Soft and hard impact’, in ‘Concrete for Hazard Protection’ (Concrete Society, Edinburgh, 1987) pp. 175–186.

[21]

Bischoff, P. H. and Perry, S. H., ‘Compressive strain rate effects of concrete’, in ‘Cement-Based Composites: Strain Rate Effects on Fracture’, edited by S. Mindess and S. P. Shah, Vol. 64 (Materials Research Society, Pittsburg, 1986) pp. 151–165.

[22]

Goldsmith, W., ‘Impact: The Theory and Physical Behaviour of Colliding Solids’ (Arnold, London, 1960).

[23]

Hjorth, O., ‘Ein Beitrag zur Frage der Festigkeiten und des Verbundverhaltens von Stahl und Beton bei hohen Beanspruchungsgeschwindigkeiten’ (A Contribution to the Problem of Strength and Bond Relationships for Steel and Concrete at High Loading Rates), Dissertation, Universitat Carolo-Wilhelmina, Braunschweig, Heft 32 (1976).

[24]

Sigvaldason, O. T., ‘The influence of testing machine characteristics upon the cube and cylinder strength of concrete’,Mag. Concr. Res. 18(57) (1966) 197–206. 10.1680/macr.1966.18.57.197

[25]

Chung, H. W., ‘Shear strength of concrete joints under dynamic loads,’Concrete 12(3) (1978) 27–29.

[26]

Bentur, A., Mindess, S. and Banthia, N., ‘The behaviour of concrete under impact loading: Experimental procedures and method of analysis’,Matér. Constr. 19(113) (1986) 371–378. 10.1007/bf02472127

[27]

Zukas, J. A., Nicholas, T., Swift, H. F., Greszczuk, L. B. and Curran, D. R., ‘Impact Dynamics’ (Wiley, New York, 1982).

[28]

Hughes, B. P. and Gregory, R., ‘Concrete subjected to high rates of loading in compression’,Mag. Concr. Res. 24(78) (1972) 25–36. 10.1680/macr.1972.24.78.25

[29]

Compressive strength and ultimate strain of concrete under impact loading

B. P. Hughes, A. T. Watson

Magazine of Concrete Research 1978 10.1680/macr.1978.30.105.189

[30]

Davies, R. M., ‘A critical study of the Hopkinson pressure bar’,Phil. Trans. R. Soc. A240 (1948) 375–457.

[31]

The dynamic compression testing of solids by the method of the split Hopkinson pressure bar

E.D.H. Davies, S.C. Hunter

Journal of the Mechanics and Physics of Solids 1963 10.1016/0022-5096(63)90050-4

[32]

Lindholm, U. S., ‘High strain rate testing’, in ‘Techniques of Metals Research: Measurement of Mechanical Properties,’ edited by R. F. Bunshah, Vol. 5, Part 1 (Interscience, New York, 1971) pp. 199–271.

[33]

Bertholf, L. D. and Karnes, C. H., ‘Two-dimensional analysis of the split Hopkinson pressure bar system,’J. Mech. Phys. Solids 23(1) (1975) 1–19. 10.1016/0022-5096(75)90008-3

[34]

Hakalehto, K. O., ‘The behaviour of rock under impulse loads. A study using the Hopkinson split bar method’, Acta Polytechnica Scandinavica, Chemistry including Metallurgy Series, No. 81 (Helsinki, 1969).

[35]

Aronsson, R., Fagerlund, G. and Larsson, B., ‘Betongs slagseghet i palar’ (Impact strength of concrete piles), Cement-och Betong Institutet (CBI), forskning FO 1:77 (Stockholm, 1977).

[36]

Fagerlund, G. and Larsson, B., ‘Betongs slaghallfasthet’ (Impact strength of concrete), Cement-och Betong Institutet (CBI), forskning FO 4:79 (Stockholm, 1979).

[37]

Malvern, L. E., Jenkins, D. A., Tang, T. and Ross, C. A., ‘Dynamic compressive testing of concrete’, in Proceedings of 2nd Symposium on the Interaction of Non-Nuclear Munitions with Structures, Florida (US Dept. Defense, 1985) pp. 194–199.

[38]

Malvern, L. E., Tang, T., Jenkins, D. A. and Gong, J. C., ‘Dynamic compressive strength of cementitious materials’, in ‘Cement-Based Composites: Strain Rate Effects on Fracture’, edited by S. Mindess and S. P. Shah, Vol. 64 (Materials Research Society, Pittsburg, 1986) pp. 119–138.

[39]

Follansbee, P. S. and Frantz, C., ‘Wave propagation in the split Hopkinson pressure bar’,ASME J. Engng Mater. and Technol. 105 (1983) 61–66. 10.1115/1.3225620

[40]

Malvern, L. E., Jenkins, D. A., Tang, T. and Gong, J.-C., ‘Dynamic testing of concrete with the split Hopkinson pressure bar’, in Proceedings of 4th Symposium on the Interaction of Non-Nuclear Munitions with Structures, Florida (US Dept. Defense, 1989) pp. 296–301.

[41]

Kotsovos, M. D. and Newman, J. B., ‘Plain concrete under load. A new interpretation,’ in ‘Advanced Mechanics of Reinforced Concrete’, IABSE Final Report No. 34 (Delft, 1981) pp. 143–158.

[42]

Atchley, B. L. and Furr, H. L., ‘Strength and energy absorption capabilities of plain concrete under dynamic and static loadings,’ACI J. 64 (1967) 745–756.

[43]

Frank, T., ‘Beeinflussung der Prufergebnisse durch die Messeinrichtung bei der Stossbeanspruchung von Beton’ (The influence on test results by the measuring device used for impact tests of concrete),Materialprufung 26(4) (1984) 96–100.

[44]

Hecker, R., ‘Messtechnische Probleme bei der Erfassung der Dehnwellenform in längsgestossen Staben schlagend arbeitender Maschinen’ (Problems of measurement to record the shape of the clastic wave in an axial body in percussive machines),Technisches Messen 51(1) (1984) 29–32, 10.1524/teme.1984.51.1.29

[45]

Abrams, D. A., ‘Effect of rate of application of load on the compressive strength of concerete,’ASTM J. 17 (Part II) (1917) 364–377,

[46]

Jones, P. G. and Richart, F. E., ‘The effect of testing speed on strength and elastic properties of concrete,’ASTM J. 36 (Part II) (1936) 380–392.

[47]

Evans, R. H., ‘Effect of rate of loading on the mechanical properties of some materials,’J. Inst. Civil Engrs 18 (1942) 296–306. 10.1680/ijoti.1942.13813

[48]

Katsuta, T., ‘On the elastic and plastic properties of concrete in compression tests with high deformation-velocity, Part 1’ (in Japanese),Trans. Inst. Jap. Arch. No. 29 (May 1943) 268–274.

[49]

Idem ‘On the elastic and plastic properties of concrete in compression tests with high deformation-velocity, Part 2’ (in Japanese),ibid. No. 33 (Part I) (1944) 53–54.

[50]

Thaulow, S., ‘Rate of loading for compressive strength tests,’Belong 38(1) (1953) 11–15.

Showing 50 of 120 references

Cited By

1,232

Seismic and progressive collapse strain rate effects on the compressive, tensile and shear mechanical properties of softwood Laminated Veneer Lumber (LVL)

Nasim Ghasemi, Ayon Das · 2026

Construction and Building Materials

Water saturation effect on the dynamic tensile behavior of high ductility concrete

Jintao Liu, Lian Zheng · 2025

Composites Part B: Engineering

A strain-rate-sensitive fiber beam element model for seismic dynamic response analysis of building structures

Anqi Li, Guangwei Cao · 2025

Structures

Dynamic mechanical behaviour and life cycle assessment of rubberised solid waste-based geopolymer concrete

Baifa Zhang, Yuan Feng · 2025

Journal of Cleaner Production

Stochastic analysis of dynamic fracture of concrete using CT-image based mesoscale models with a rate-dependent phase field method

Yu-jie Huang, Lu Hai · 2025

International Journal of Impact Eng...

Dynamic strength criterion of concrete utilizing dynamic coordinates

Jing Hu, Yangping Yao · 2024

Structural Concrete

Blast-resistance characteristics and design of steel wire reinforced ultra-high performance concrete slabs

Qishuai Wu, Xinyue Wang · 2024

International Journal of Impact Eng...

Residual mechanical properties of high strength concrete BBR9 subjected to dynamic uniaxial compressive loading

Mohamed A. Abbas, Brett A. Williams · 2024

Cement and Concrete Research

Development of the split-Hopkinson pressure bar and its application in testing the dynamic mechanical properties of quasi-brittle materials: A review

Shizhuo Zou, Yongtao Gao · 2024

Journal of Materials Research and T...

Investigation of the dynamic compressive mechanical properties of concrete under the combined effects of freeze–thaw and salt erosion

Shin-Fu Chen, Jianxi Ren · 2023

Construction and Building Materials

Assessment of a high strength concrete using experimental and numerical methodologies for high strain rate ballistic impacts

Richard A. Perkins, Christian J. Duncan · 2023

International Journal of Impact Eng...

Experimental investigation on the effect of high-pressure water on tensile strength and microstructure of cementitious materials

Xiyao Zhao, Yun Tian · 2023

Construction and Building Materials

Effect of hybrid industrial and recycled steel fibres on static and dynamic mechanical properties of ultra-high performance concrete

Hui Zhong, Meng Chen · 2023

Construction and Building Materials

Machine learning method to predict dynamic compressive response of concrete-like material at high strain rates

Xu Long, Ming-hui Mao · 2023

Defence Technology

Predictive models for concrete properties using machine learning and deep learning approaches: A review

Mohammad Mohtasham Moein, Ashkan Saradar · 2023

Journal of Building Engineering

Machine Learning-Based Method for Predicting Compressive Strength of Concrete

Daihong Li, Zhili Tang · 2023

Processes

Concrete improvement incorporating recycled powder and aggregates treated via a combination of calcination and carbonation: The impact behaviors

Yuan Feng, Jianglin Li · 2023

Journal of Cleaner Production

Rigid‐body‐spring network model for failure simulation of reinforced‐concrete members under various loading rates

Bonhwi Choo, Young Kwang Hwang · 2023

International Journal for Numerical...

Effect of strength grade on mechanical properties of concrete under dynamic load

Zhihang Wang, Erlei Bai · 2022

Structural Concrete

Dynamic uniaxial compression testing of veined rocks under high strain rates

Franco Robbiano, Kai Liu · 2022

International Journal of Rock Mecha...

Metrics

1,232

Citations

120

References

Details

Published: Nov 01, 1991
Vol/Issue: 24(6)
Pages: 425-450
License: View

Authors

Cite This Article

P. H. Bischoff, S. H. Perry (1991). Compressive behaviour of concrete at high strain rates. Materials and Structures, 24(6), 425-450. https://doi.org/10.1007/bf02472016

Compressive behaviour of concrete at high strain rates

You May Also Like