Effect of solidification conditions on the solidification mode in austenitic stainless steels

N. Suutala

doi:10.1007/bf02651615

journal article Feb 01, 1983

Effect of solidification conditions on the solidification mode in austenitic stainless steels

N. Suutala

Metallurgical Transactions A Vol. 14 No. 1 pp. 191-197 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/bf02651615

Topics

No keywords indexed for this article. Browse by subject →

References

44

[1]

G. Blanc and R. Tricot:Mém. Sci. Rev. Mét., 1971, vol. 68, pp. 735–53.

[2]

S. Kato, H. Yoshida, and N. Chino:Tetsu-to-Hagané, 1977, vol. 63, pp. 1681–90. 10.2355/tetsutohagane1955.63.10_1681

[3]

A guide to the solidification of steels, Jernkontoret, Stockholm, 1977.

[4]

Ö. Hammar and U. Svensson:Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 401–10.

[5]

N. Suutala, T. Takalo, and T. Moisio:Metall. Trans. A, 1979, vol. 10A, pp. 512–14. 10.1007/bf02697081

[6]

H. Aström, B. Loberg, B. Bengtson, and K. Easterling:Met. Sci., 1975, vol. 10, pp. 225–34. 10.1179/030634576790432380

[7]

H. Fredriksson:Metall. Trans., 1972, vol. 3, pp. 2989–97. 10.1007/bf02652872

[8]

N. Suutala and T. Moisio:Solidification Technology in the Foundry and Casthouse, The Metals Society, London, in press.

[9]

T. Takalo, N. Suutala, and T. Moisio:Metall. Trans. A, 1979, vol. 10A, pp. 1173–80. 10.1007/bf02811663

[10]

N. Suutala, T. Takalo, and T. Moisio:Metall. Trans. A, 1979, vol. 10A, pp. 1181–90.

[11]

N. Suutala, T. Takalo, and T. Moisio:Metall. Trans. A, 1980, vol. 11A, pp. 717–25. 10.1007/bf02661201

[12]

N. Suutala:Metall. Trans. A, 1982, vol. 13A, p. 2121. 10.1007/bf02648382

[13]

Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic Stainless Steel Weld Metal, American Welding Society, A4.2-74, approved June 5, 1975.

[14]

W. T. DeLong:Weld. J., 1974, vol. 53, pp. 273s-286s.

[15]

T. V. Simpkinson:Iron Age, 1952, vol. 170, pp. 166–69.

[16]

M. C. Flemings:Solidification Processing, McGraw-Hill Book Co., New York, NY, 1974, pp. 146–54.

[17]

K. -O. Jonsson:Jernkont. Ann., 1969, vol. 153, pp. 193–99.

[18]

J. E. Lait, J. K. Brimacombe, and F. Weinberg:Ironmaking and Steel-making, 1974, vol. 1, no. 2, pp. 90–97.

[19]

F. Matsuda, T. Hashimoto, and T. Senda:Trans. NRIM, 1969, vol. 11, pp. 89–104.

[20]

G. J. Davies and J. G. Garland:Int. Met. Rev., 1975, vol. 20, pp. 83–106. 10.1179/imr.1975.20.1.83

[21]

M. H. Burden and J. D. Hunt:J. Crystal Growth, Part I, 1974, vol. 22, pp. 99–108; J. Crystal Growth, Part II, 1974, vol. 22, pp. 109-16. 10.1016/0022-0248(74)90126-2

[22]

J. D. Hunt:Solidification and Casting of Metals, The Metals Society, London, 1979, pp. 3–9.

[23]

R. Trivedi:J. Crystal Growth, 1980, vol. 49, pp. 219–32. 10.1016/0022-0248(80)90157-8

[24]

W. Kurz and D. J. Fischer:Acta Met., 1981, vol. 29, pp. 11–20. 10.1016/0001-6160(81)90082-1

[25]

L. F. Martins and H. Carvalhinhos: Lisboa’ 75, Paper no. 16,42nd Int. Foundry Congress, Lissabon, 1975.

[26]

M. H. Carvalhos, J. A. Sequeira, and H. Carvalhinhos:Fundicao, 1974, vol. 74, pp. 82–90.

[27]

C. -Å. Däcker and H. Fredriksson: The Royal University of Technology, Stockholm, unpublished research, 1976.

[28]

B. Leffler and S. Malm:Met. Technology, 1977, vol. 4, pp. 81–90. 10.1179/030716977803292457

[29]

N. Suutala: Licenciate Thesis (in Finnish), University of Oulu, Oulu, 1980.

[30]

M. Bobadilla and G. Lesoult:Mém. Sci. Rev. Mét., 1981, vol. 78, pp. 345–58.

[31]

H. Jacobi and W. Pitsch:Arch. Eisenhüttenwes., 1975, vol. 46, pp. 417–22. 10.1002/srin.197503652

[32]

L. Westin: Swedish Institute for Metal Research, Stockholm, unpublished research, 1977.

[33]

T. E. Roberts, D. P. Kovarik, and R. D. Maier:Proc. 83rd Annual Meeting, American Foundrymen’s Society, 1980, pp. 279-98.

[34]

E. Kuula: Outokumpu Oy, Tornio, private communication, September 1981.

[35]

N. Suutala, S. Sivonen, and T. Moisio:Schweissen Schneiden, 1978, vol. 30, pp. 170–73.

[36]

N. Suutala, T. Takalo, and T. Moisio:Weld. J., 1981, vol. 61, pp. 92s-93s.

[37]

S. A. David:Weld. J., 1981, vol. 61, pp. 63s-71s.

[38]

G. L. Leone and H. W. Kerr:Weld. J., 1982, vol. 62, pp. 13s-21s.

[39]

H. Hoffmeister and R. Mundt:Schweissen Schneiden, 1978, vol. 30, pp. 214–18.

[40]

H. Thier:DVS-Berichte, Band 41, DVS GmbH, Düsseldorf, 1976, pp. 100-06.

[41]

V. Kujanpää, N. Suutala, T. Takalo, and T. Moisio:Met. Con., 1980, vol. 12, pp. 282–85.

[42]

L. -Å. Nordström and S. Malm:Scand. J. Metallurgy, 1978, vol. 7, pp. 31–33.

[43]

J. Stjerndahl and C.-Å. Däcker:Scand. J. Metallurgy, 1980, vol. 9, pp. 217–24.

[44]

D. Rosenthal:Trans. ASME, 1946, vol. 68, pp. 849–66.

Metrics

188

Citations

44

References

Details

Published: Feb 01, 1983
Vol/Issue: 14(1)
Pages: 191-197
License: View

Authors

N

N. Suutala

Cite This Article

N. Suutala (1983). Effect of solidification conditions on the solidification mode in austenitic stainless steels. Metallurgical Transactions A, 14(1), 191-197. https://doi.org/10.1007/bf02651615

Effect of solidification conditions on the solidification mode in austenitic stainless steels

You May Also Like