Electroless alloy/composite coatings: A review

R. C. Agarwala; Vijaya Agarwala

doi:10.1007/bf02706445

journal article Jun 01, 2003

Electroless alloy/composite coatings: A review

R. C. Agarwala Vijaya Agarwala

Sādhanā Vol. 28 No. 3-4 pp. 475-493 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/bf02706445

Topics

No keywords indexed for this article. Browse by subject →

References

82

[1]

Agarwala R C, Ray S 1988Z. Mettalkde. 79: 472–475

[2]

Agarwala R C, Ray S 1992Z. Metallkde. 83: 203–207

[3]

Agarwala R C 1987 Ph D thesis, Department of Metallurgical and Materials Engineering, University of Roorkee (presently IIT, Roorkee)

[4]

Agarwala R C, Agarwala V, Singhal V 1997 Stress corrosion studies of electroless silver coating with Al-3.8 wt% Mg alloy.Proc. National Seminar on Surface Eng. Jaipur, pp 54–64

[5]

Agarwala R C, Agarwala V, Sharma S B 1999 Article presented at Institute Industry Interaction Meet, held on Oct. 9, 1999 at University of Roorkee (presently IIT, Roorkee), pp 32–40

[6]

Geometrical Effects in the Electroless Metallization of Fine Metal Patterns

Andre M. T. van der Putten, Jan Willem G. de Bakker

Journal of The Electrochemical Society 1993 10.1149/1.2220799

[7]

Apachitei I, Duszczyk J 2000Surface Coating Technol. 132: 89–98 10.1016/s0257-8972(00)00864-1

[8]

Apachitei I, Duszczyk J, Katgerman L, Overkamp P J B 1998aScr. Mater. 38: 1347–1353 10.1016/s1359-6462(98)00054-2

[9]

Apachitei I, Duszyk J, Katgerman L, Overkamp P J B 1998bScr. Mater. 38: 1383–1389 10.1016/s1359-6462(98)00053-0

[10]

Bakonyi I, Cziraki A, Nagy I, Hosso M 1986Z. Metallkd. 11: 425–432

[11]

Balaraju J N, Sheshadri S K 1999Metal Finishing 97 (7): 8–13 10.1016/s0026-0576(00)80593-0

[12]

Autocatalytic deposition of nickel-tin-copper-phosphorus amorphous alloys

Zhang Bangwei, Xie Haowen, Xu Xiewen

Metal Finishing 1999 10.1016/s0026-0576(00)80981-2

[13]

Bedingfield P B, Lewis D B, Datta P K, Gray J S, Wells P B 1991Trans. Inst. Metal Finishing 70 (1): 19–23 10.1080/00202967.1992.11870935

[14]

Bin-Sudin M, Leyland A, James AS, Matthew A, Housden J, Garside B 1996Surface Coating Technol. 81 (2-3) 215–224 10.1016/0257-8972(95)02529-4

[15]

Boudrand D W 1994 Electroless plating.ASM Handbook, Surface Eng. 15: 200

[16]

Bozzini B, Boniardi M 1997Z Metallkde 88: 493–497

[17]

Bozzini B, Cavallotti P L 1997Scr. Mater. 36: 1245–1248 10.1016/s1359-6462(97)00032-8

[18]

Bozzini B, Martin C, Cavalloti P L, Lanzoni E 1999Wear, 225: 806–813 10.1016/s0043-1648(98)00389-5

[19]

Brenner A 1963Electrodeposition of alloys, principles and practice (Academic Press)

[20]

Brenner A, Riddell G 1946Res. Natl. US Bur. Stand. 37: 31 10.6028/jres.037.019

[21]

Brenner A, Riddell G 1947Res. Natl. US Bur. Stand. 39: 389

[22]

Brenner A, Couch d. E, Williams E K 1950J. Res. Nat. Bur. Stand. 44: 109 10.6028/jres.044.009

[23]

Chitty J, Pertuz A, Hintermann H, Statia M H, Puchi E S 1997Thin Solid Films 308-309: 430–435 10.1016/s0040-6090(97)00599-3

[24]

Cziraki A, Fogarassy B, Bakonyi I, Tompa K, Hegedns Z 1980J. Phys. (Paris) C8 (suppl.): 141

[25]

Datta P K, Bedingfield P B, Lewis D B, Wells P B 1991 Structure and phase changes accompanying treatment of electroless Ni-B alloy coating.Conf. Proc. 2nd Int. Electroless Nickel Conference Solihullpp. 139–153

[26]

Di Giampaolo A R, Ordonez J G, Gugliemacci J M, Lira J 1997Surface Coating Technol. 89: 127–131 10.1016/s0257-8972(96)03089-7

[27]

Dini J W, Coronado D R 1967Plating 38: 385

[28]

Feldstein M D 1999Metal Finishing, 97: 87–90 10.1016/s0026-0576(99)80251-7

[29]

Gaurilow G G 1979Chemical (electroless) nickel plating (Redhill: Porticullis)

[30]

Gawne D T, Ma U 1987Wear 120: 125–149 10.1016/0043-1648(87)90063-9

[31]

Ge J P, Che R X, Wang X Z 1987Plating Surface Finishing 85: 69–73

[32]

Gorbunova K M, Nikiforova A A, Sadkov G A 1966Electrochemistry (ed.) M M Melnikova, p. 41

[33]

Graham A H, Lindsay R W, Read H J 1965J. Electrochem. Soc. 112: 401–413 10.1149/1.2423557

[34]

Graham A H, Lindsay R W, Read H J 1962J. Electrochem. Soc. 109: 1200–1201 10.1149/1.2425275

[35]

Grosjean A, Rezrazi M, Tachez M 1997Surface Coating Technol. 96: 300–304 10.1016/s0257-8972(97)00180-1

[36]

Gutzeit G 1959Plating Surface Finishing 46: 1158, 1275, 1377

[37]

Gutzeit G 1960Plating Surface Finishing 47: 63

[38]

Gutziet G, London R 1954aMet. Progr. 66: 113

[39]

Gutziet G, London R 1954bPlating 41: 1416

[40]

Harris S J, Overs M P, Gould A J 1985Wear 106: p. 35–52 10.1016/0043-1648(85)90102-4

[41]

Heinz G S, Heinrich K 1990Plating Surface Finishing 11: 50–54

[42]

Henry J 1984aMetal Finishing 82: 17–18

[43]

Henry J 1984bMetal Finishing 82: 45–47

[44]

Hur K H, Jeong J H, Lee D N 1990J. Mater. Sci. 25: 2573–2584 10.1007/bf00638061

[45]

Husheng G, Haicheng G, Huijiu Z 1991Wear 142: 291–301 10.1016/0043-1648(91)90170-y

[46]

Jun L, Hu X, Wang D 1996Plating Surface Finishing 83: 62–64

[47]

Kim D H, Aoki K, Takano O 1995J. Electrochem. Soc. 142: 3763–3767 10.1149/1.2048410

[48]

Kuo K H, Wu Y K, Liang J Z, Lai Z H 1984 InProc. 8th European Congress on Electron Microscopy Budapest (eds) A Csanady, P Rohlich, D Szabo The programme Committee, Budapest, pp. 913

[49]

Kuo K H, Wu Y K, Liang J Z, Lai Z H 1985Philos. Mag., A51: 205 10.1080/01418610.1985.12069158

[50]

Lanzoni E, Martini C, Ruggeri O, Bertoncello R, Glisenti A 1997European Fedration of Corrosion Publications (London: The Institute of Metals) No. 20, pp. 232–243

Showing 50 of 82 references

Metrics

300

Citations

82

References

Details