Metal Additive Manufacturing: A Review

William E. Frazier

doi:10.1007/s11665-014-0958-z

journal article Apr 08, 2014

Metal Additive Manufacturing: A Review

William E. Frazier

Journal of Materials Engineering and Performance Vol. 23 No. 6 pp. 1917-1928 · Springer Science and Business Media LLC

View at Publisher Save 10.1007/s11665-014-0958-z

Topics

No keywords indexed for this article. Browse by subject →

References

54

[1]

J. Alcisto, A. Enriquez, H. Garcia, S. Hinkson, T. Steelman, E. Silverman, P. Valdovino, H. Gigerenzer, J. Foyos, J. Ogren, J. Dorey, K. Karg, T. McDonald, and O.S. Es-Said, Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V, JMEP, 2011, 20(2), p 203–212 10.1007/s11665-010-9670-9

[2]

D.L. Bourell, M.C. Leu, and D.W. Rosen, Ed., Roadmap for Additive Manufacturing, University of Texas at Austin, Austin TX, 2009

[3]

W.E. Frazier, “Digital Manufacturing of Metallic Components: Vision and Roadmap”, Solid Free Form Fabrication Proceedings, University of Texas at Austin, Austin TX, 2010, p 717–732

[4]

E. Herderick, Additive Manufacturing of Metals: A Review, Proceedings of MS&T’11, Additive Manufacturing of Metals, Columbus, OH, 2011

[5]

NIST, “Measurement Science Roadmap for Metal-Based Additive Manufacturing,” US Department of Commerce, National Institute of Standards and Technology, Prepared by Energetics Incorporated, May 2013

[6]

J. Scott, N. Gupta, C. Weber, S. Newsome, T. Wohlers, and T. Caffrey, Additive Manufacturing: Status and Opportunities, IDA, Science and Technology Policy Institute, Washington, DC, 2012

[7]

DoD SBIR/STTR Database ( https://www.dodsbir.net , Contracts N00014-12-C-0411, N00014-12-C-0221, N00014-13-C-0057, Nov 2013

[8]

S.M. Kelly and S.L. Kampe, Microstructural Evolution in Laser-Deposited Multilayer Ti-6Al-4V Builds: Part II. Thermal Modeling, Metall. Trans. A., 2004, 35A, p 1869–1879 10.1007/s11661-004-0095-7

[9]

F. Wang, S. Williams, P. Colegrove, and A.A. Antonysamy, Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V, Metall. Trans. A., 2013, 44A, p 968–977 10.1007/s11661-012-1444-6

[10]

B. Zheng, Y. Zhou, J.E. Smugeresky, J.M. Schoenung, and E.J. Lavernia, Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations, Metall. Trans. A., 2013, 39A, p 2237–2245 10.1007/s11661-008-9566-6

[11]

T. Vilaro, C. Colin, and J.D. Bartout, As-fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting, Metall. Trans. A., 2011, 42A, p 3190–3199 10.1007/s11661-011-0731-y

[12]

B. Zheng, Y. Zhou, J.E. Smugeresky, J.M. Schoenung, and E.J. Lavernia, Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion, Metall. Trans. A., 2008, 39A, p 2228 10.1007/s11661-008-9557-7

[13]

P.A. Kobryn and S.L. Semiatin, The Laser Additive Manufacturing of Ti-6Al-4V, JOM, 2011, 53, p 40–43 10.1007/s11837-001-0068-x

[14]

L.E. Murr, E. Martinez, S.M. Gaytan, D.A. Ramirez, B.I. Machado, P.W. Shindo, J.L. Martinez, F. Medina, J. Wooten, D. Ciscel, U. Ackelid, and R.B. Wicker, Microstructural Architecture, Microstructures, and Mechanical Properties of a Nickel-Base Superalloy Fabricated by Electron Beam Melting, Metall. Trans. A., 2011, 42A, p 3491–3508 10.1007/s11661-011-0748-2

[15]

S.G. Lambrakos and K.P. Cooper, An Algorithm for Inverse Modeling of Layer-by-Layer Deposition Processes, JMEP, 2009, 18(3), p 221–230 10.1007/s11665-008-9268-7

[16]

S.G. Lambrakos and K.P. Cooper, A General Algorithm for Inverse Modeling of Layer-by-Layer Deposition Processes, JMEP, 2010, 19(3), p 314–324 10.1007/s11665-009-9497-4

[17]

F. Wang, S. Williams, P. Colegrove, and A.A. Antonysamy, Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V, Metall. Trans. A., 2013, 44A, p 968–977 10.1007/s11661-012-1444-6

[18]

AMS 4999 Specification, Titanium Alloy Laser Deposited Products 6Al-4V Annealed, SAE, Warrendale, PA 2002

[19]

S. Rengers, Electron Beam Melting [EBM] vs. Direct Metal Laser Sintering [DMLS], Presented at SAMPE Midwest Chapter, Direct Part Manufacturing Workshop, Wright State University, Nov 2012

[20]

M. Svensson, Ti6Al4V manufactured with Electron Beam Melting (EBM): Mechanical and Chemical Properties, Presented at Aeromat 2009, Dayton OH, Jun 2009

[21]

M.K.E. Ramosoeu, G. Booysen, T.N. Ngonda, and H.K. Chikwanda, Mechanical Properties of Direct Laser Sintered Ti-6Al-V4, MS&T’11, Columbus, OH, 2011

[22]

B. Baufeld, Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD), JMEP, 2012, 21(7), p 1416–1421 10.1007/s11665-011-0009-y

[23]

K.S. Chan, M. Koike, R.L. Mason, and T. Okabe, Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants, Metall. Trans. A., 2013, 44A, p 1010–1022 10.1007/s11661-012-1470-4

[24]

D. Greitemeir, K. Schmidtke, V. Holzinger, and C. D. Donne, Additive Layer Manufacturing of Ti-6Al-4V and Scalmalloyrp© Fatigue and Fracture, 27th ICAF Symposium, Jerusalem, June 2013

[25]

R. Martukanitz and T. Simpson, The Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D), Brief at the Technology Showcase, ARL Penn State, State College, PA Jan 2013

[26]

C. Charles, “Modeling microstructure evolution of weld deposited Ti-6Al-4V,” Ph.D. thesis, Lulea University of Technology, Lulea, Sweden, 2008

[27]

S.M. Kelly, “Thermal and Microstructure Modeling of Metal Deposition Processes with Application to Ti-6Al-4V,” Ph.D. thesis, Virginia Polytechnic Institute, VA, 2004

[28]

J. Beuth and N. Klingbeil, The Role of Process Variables in Laser-Based Direct Metal Solid Freeform Fabrication, JOM, 2001, 53, p 36–39 10.1007/s11837-001-0067-y

[29]

W.E. Frazier, D. Polakovics, and W. Koegel, Qualifying of Metallic Materials and Structures for Aerospace Applications, JOM, 2001, 53, p 16–18 10.1007/s11837-001-0171-z

[30]

Metallic Materials Properties Development and Standardization (MMPDS-02). FAA, Battelle Memorial Institute, Atlantic City, NJ, 2005

[31]

ASTM F2921-11, Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies, ASTM International, West Conshohocken, PA, 2011

[32]

ASTM F2792-12a, Standard Terminology for Additive Manufacturing Technologies, ASTM International, West Conshohocken, PA, 2012

[33]

ASTM F2915-12, Standard Specification for Additive Manufacturing File Format (AFM) Version 1.1., ASTM International, West Conshohocken, PA, 2012

[34]

ASTM F2924-12, Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion, ASTM International, West Conshohocken, PA, 2012

[35]

M. Maher, Open Manufacturing, Brief Presented at the SAMPE Direct Part Manufacturing Workshop, Dayton OH, 2012

[36]

T.H. Benson Tolle, and G.A. Shoeppner, Accelerating Materials Insertion by Evolving the DoD Materials Qualification-Transition Paradigm, AMMITAC Q., 2002, 6(1), p 3–6

[37]

M. Ruffo, C. Tuck, and R. Hague, Cost Estimation for Rapid Manufacturing: Laser Sintering Production for Low to Medium Volumes, J. Eng. Manuf. Proc. IMech E, 2006, 220B, p 1417–1427 10.1243/09544054jem517

[38]

A. Gunasekaran, Design of Activity-Based Costing in a Small Company: A Case Study, Comput. Ind. Eng., 1999, 37, p 413–416 10.1016/s0360-8352(99)00106-0

[39]

T. Wen-Hsien, Activity-Based Costing Model for Joint Products, Proc. 18th International Conference on Computers and Industrial Engineering, Vol. 31(3/4), Computers Industrial Engineering, 1996, p. 725–729 10.1016/s0360-8352(96)00246-x

[40]

A. Gunaesekaran, R. McNeil, and D. Singh, Activity Based Management in a Small Company: A Case Study, Prod. Plan. Control, 2000, 11(4), p 391–399 10.1080/095372800232126

[41]

Materials KTN, Shaping Our National Competency in Additive Manufacturing, 27th ed., Additive Manufacturing Special Interest Group for the Technology Strategy Board, UK, 2012

[42]

M. Gnam, R. Plourde, and T. McDonald, “Laser Engineered Net Shaping (LENS),” Paper Presented at the National Center for Manufacturing Sciences, JTEG Business Meeting, 2000

[43]

S.M. Kelly, Cost Benefit Analysis of Direct Digital Manufacturing, Private Communications, ARL Penn State University, 2010

[44]

S. Phinazee, Efficiencies: Saving Time and Money with Electron Beam Free Form Fabrication, Fabricator, 2007, p 15–20

[45]

M.E. Kinsella, Additive Manufacturing of Superalloys for Aerospace Applications, WPAFB AFRL, Report Number AFRL-RX-WP-TP-2008-4318, Dayton OH 2008

[46]

C.A. Brice, S.D. Needler, and B.T. Rosenberger, Direct Manufacturing at Lockheed Martin Aeronautics Co., Paper Presented at AeroMat Conference, Seattle Washington, 2010

[47]

A. Drizo and J. Pegna, Environmental Impacts of Rapid Prototyping: An Overview of Research to Date, Rapid Prototyp. J., 2006, 12(2), p 64–71 10.1108/13552540610652393

[48]

W.R. Morrow, H. Qi, I. Kim, J. Mazumder, and S.J. Skerlos, Environmental Aspects of Laser-Based and Conventional Tool and Die Manufacturing, J. Clean. Prod., 2007, 15, p 932–943 10.1016/j.jclepro.2005.11.030

[49]

Y. Luo, Z. Ji, M.C. Leu, and R. Caudill, Environmental Performance Analysis of Solid Freeform Fabrication Processes, IEEE 0-7803-5495-8/99, 1999

[50]

K. Kellens, E. Yasa, Renaldi, W. Dewulf, J.P. Kruth, and J.R. Duflou, Energy and Resource Efficiency of SLS/SLM Processes, Proceedings Twenty-Second Annual International Solid Freeform Fabrication Symposium, 2011

Showing 50 of 54 references

Cited By

5,171

Strength-ductility synergy mechanism in dual-titanium heterogeneous structures fabricated by multi-material laser powder bed fusion and tailored heat treatments

Linxi Wu, Qimin Shi · 2026

Journal of Materials Research and T...

The influence of particle size distribution on the microstructure and mechanical properties of AlSi10Mg alloy produced by selective laser melting

Xu Zhang, Maoning Ge · 2026

Materials Science and Engineering:...

Hydrogen embrittlement in a CoCrNi medium-entropy alloy fabricated via laser powder bed fusion: Characteristic intergranular cracking and hydrogen-enhanced twinning

Tingshu Chen, Hang Su · 2026

Journal of Materials Science &...

Advanced Materials, Machinability and Intelligent Manufacturing Systems

Anna Burduk, Andre Batako · 2026

Materials

Ultrasonic-Based Quantification and Process Parameter Optimization of Anisotropy and Heterogeneity in WAAM 2319 Aluminum Alloy

Chao Li, Hanlei Liu · 2026

Materials

Toward sustainable metal additive manufacturing: Environmental hotspots and circularity pathways

Su Kunt, Metin U. Salamcı · 2026

Journal of Environmental Management

A unified probabilistic defect-based fatigue modelling approach to account for surface and bulk defects in additively manufactured Ti-6Al-4V alloys and defect characterisation

Enrico Salvati, Marco Pelegatti · 2026

International Journal of Fatigue

Mechanistic process–microstructure–cracking correlations in laser powder bed fusion of the Ni-based superalloy IN738

Hamidreza Aghajani, Mehdi Mosayebi · 2026

Materials & Design

Laser beam powder bed fusion nickel-based superalloys: microstructure, alloy tailoring and mechanical properties

Tian-Xing Huang, Zuming Liu · 2026

Virtual and Physical Prototyping

Comparative analysis of guide vane edge profiles in LPBF-manufactured elbows for enhanced flow performance

Mengyang Wang, Dingbo Li · 2026

Ocean Engineering

Deformation of selective-laser-melting-fabricated Al-Mg-Sc-Zr alloy under uniaxial tension: Effects of structure anisotropy and temperature

W.Z. Wang, Y.J. Deng · 2026

Materials Science and Engineering:...

Parametric deformation of gyroid structures for enhanced thermo-hydraulic performance in heat exchangers

Jiaxuan Wang, Fengrui Zhang · 2026

International Journal of Thermal Sc...

Sequential design optimization of high-variability additive manufacturing processes using Gaussian process regression

Maher B. Alghalayini, Christiaan J.J. Paredis · 2026

Journal of Manufacturing Processes

Formation of a bi-directional α2/γ lamellar microstructure through crystallographic texture control in a γ-TiAl alloy fabricated by laser powder bed fusion

Sung-hyun Park, Ozkan Gokcekaya · 2026

Journal of Materials Research and T...

Tailoring microstructure and mechanical properties of additively manufactured H13 tool Steel: Influence of build orientation and tempering treatments

Hassan Hosseinlou, Mohsen Shakeri · 2025

Materials Science and Engineering:...

Extremely low temperature mechanical behavior of in-situ oxide containing 304L stainless steel fabricated by laser powder bed fusion

Kwangtae Son, Seung-Min Jeon · 2025

Journal of Materials Science &...

A Review on Additive Manufactured Engineering Materials for Enhanced Road Safety and Transportation Applications

Cem Alparslan, Muhammed Fatih Yentimur · 2025

Polymers

Fracture behavior of sustainable wood and PLA composites fabricated by fused deposition modeling using essential work of fracture

Ehsan Kargar, Seyed-Amir Hosseini-Taklimi · 2025

Scientific Reports

Inconel alloys: A comprehensive review of properties and advanced manufacturing techniques

Muhammad Ahmad Iqbal, Kateřina Skotnicová · 2025

International Journal of Thermoflui...

Additive manufacturing of metal matrix composites

Mohan Sai Kiran Kumar Yadav Nartu, Priyanshi Agrawal · 2025

Materials & Design

Metrics

5,171

Citations

54

References

Details

Published: Apr 08, 2014
Vol/Issue: 23(6)
Pages: 1917-1928
License: View

Authors

W

William E. Frazier

Cite This Article

William E. Frazier (2014). Metal Additive Manufacturing: A Review. Journal of Materials Engineering and Performance, 23(6), 1917-1928. https://doi.org/10.1007/s11665-014-0958-z

Metal Additive Manufacturing: A Review

You May Also Like