journal article
Jan 01, 2018
Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process
Topics
No keywords indexed for this article. Browse by subject →
References
35
[1]
Speer "Carbon partitioning into austenite after martensite transformation" Acta Mater. (2003) 10.1016/s1359-6454(03)00059-4
[2]
Clarke "Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: a critical assessment" Acta Mater. (2008) 10.1016/j.actamat.2007.08.051
[3]
De Moor "Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels" Metall. Mater. Trans. A (2008) 10.1007/s11661-008-9609-z
[4]
De Knijf "In situ austenite-martensite interface mobility study during annealing" Acta Mater. (2015) 10.1016/j.actamat.2015.02.040
[5]
Santofimia "Model for the interaction between interface migration and carbon diffusion during annealing of martensite-austenite microstructures in steels" Scr. Mater. (2008) 10.1016/j.scriptamat.2008.02.045
[6]
Santofimia "Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing" Acta Mater. (2009) 10.1016/j.actamat.2009.06.024
[7]
HajyAkbary "Interaction of carbon partitioning, carbide precipitation and bainite formation during the Q&P process in a low C steel" Acta Mater. (2016) 10.1016/j.actamat.2015.11.032
[8]
Toji "Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation" Acta Mater. (2015) 10.1016/j.actamat.2014.11.049
[9]
Speer "Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation" Curr. Opin. Solid State Mater. Sci. (2004) 10.1016/j.cossms.2004.09.003
[10]
Li "Bainitic transformation during the two-step quenching and partitioning process in a medium carbon steel containing silicon" Mater. Sci. Eng. A (2010) 10.1016/j.msea.2010.06.045
[11]
Santofimia "Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel" Acta Mater. (2011) 10.1016/j.actamat.2011.06.014
[12]
da Silva "Quenching and partitioning heat treatment in ductile cast irons" Mater. Res. (2014) 10.1590/1516-1439.220713
[13]
Mujahid "Partitioning of carbon from supersaturated ferrite plates" Acta Metall. Mater. (1992) 10.1016/0956-7151(92)90313-4
[14]
Hillert "Escape of carbon from ferrite plates in austenite" Acta Metall. Mater. (1993) 10.1016/0956-7151(93)90365-y
[15]
Takahama "Phase field simulation of the carbon redistribution during the quenching and partitioning process in a low-carbon steel" Acta Mater. (2012) 10.1016/j.actamat.2012.01.055
[16]
Mecozzi "Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels" Comput. Mater. Sci. (2016) 10.1016/j.commatsci.2015.10.048
[17]
Hehemann "A debate on the bainite reaction" Metall. Trans. (1972) 10.1007/bf02642439
[18]
Fielding "The bainite controversy" Mater. Sci. Technol. (2013) 10.1179/1743284712y.0000000157
[19]
Aaronson "On the problem of the definitions and the mechanism of the bainite reaction" (1968)
[20]
Hillert "Diffusion in growth of bainite" Metall. Mater. Trans. A (1994) 10.1007/bf02649044
[21]
Borgenstam "Metallographic evidence of carbon diffusion in the growth of bainite" Acta Mater. (2009) 10.1016/j.actamat.2009.03.026
[22]
Hillert "Role of carbon and alloying elements in the formation of bainitic ferrite" Metall. Mater. Trans. A (2004) 10.1007/s11661-004-0275-5
[23]
Gouné "Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels" Mater. Sci. Eng. R Rep. (2015) 10.1016/j.mser.2015.03.001
[24]
Chen "Analysis of transformation stasis during the isothermal bainitic ferrite formation in Fe-C-Mn and Fe-C-Mn-Si alloys" Acta Mater. (2013) 10.1016/j.actamat.2013.05.034
[25]
Yang "A 2D analysis of the competition between the equiaxed ferritic and the bainitic morphology based on a Gibbs Energy Balance approach" Acta Mater. (2016) 10.1016/j.actamat.2015.12.040
[26]
Xia "Direct measurement of carbon enrichment in the incomplete bainite transformation in Mo added low carbon steels" Acta Mater. (2015) 10.1016/j.actamat.2015.03.021
[27]
Gamsjäger "Interface mobility in case of the austenite-to-ferrite phase transformation" Comput. Mater. Sci. (2006) 10.1016/j.commatsci.2005.12.011
[28]
Chen "A general mixed-mode model for the austenite-to-ferrite transformation kinetics in Fe-C-M alloys" Acta Mater. (2014) 10.1016/j.actamat.2014.03.034
[29]
Ågren "Diffusion in phases with several components and sublattices" J. Phys. Chem. Solids (1982) 10.1016/0022-3697(82)90152-4
[30]
Ågren "A revised expression for the diffusivity of carbon in binary Fe-C austenite" Scr. Metall. (1986) 10.1016/0036-9748(86)90384-4
[31]
Andrews "Empirical formulae for calculation of some transformation temperatures" Iron Steel Inst. J. (1965)
[32]
Thomas "Interface migration during partitioning of Q&P steel" Mater. Sci. Technol. (2014) 10.1179/1743284714y.0000000546
[33]
Speer "Influence of interface migration during annealing of martensite/austenite mixtures" Philos. Mag. Lett. (2007) 10.1080/09500830701194173
[34]
Grajcar "Third generation of AHSS with increased fraction of retained austenite for the automotive industry" Archives Civ. Mech. Eng. (2012) 10.1016/j.acme.2012.06.011
[35]
Kuzmina "Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: example of a 9wt.medium Mn steel" Acta Mater. (2015) 10.1016/j.actamat.2014.12.021
Cited By
76
Pre-rolling effects on microstructural evolution and mechanical properties of hot- and cold-rolled Q&P specimens: an experimental study
Journal of Materials Research and T...
Xuanqi Jiang, Deming Xu · 2026
Metrics
76
Citations
35
References
Details
- Published
- Jan 01, 2018
- Vol/Issue
- 142
- Pages
- 142-151
- License
- View
Authors
Funding
CNPq
CAPES
Award: 7409/2015-00 PDSE
Cite This Article
Arthur S. Nishikawa, Maria J. Santofimia, Jilt Sietsma, et al. (2018). Influence of bainite reaction on the kinetics of carbon redistribution during the Quenching and Partitioning process. Acta Materialia, 142, 142-151. https://doi.org/10.1016/j.actamat.2017.09.048
Related
You May Also Like
A critical review of high entropy alloys and related concepts
D.B. Miracle, O.N. Senkov · 2017
8,158 citations
Perspectives on Titanium Science and Technology
Dipankar Banerjee, J.C. Williams · 2013
2,755 citations
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Lore Thijs, Frederik Verhaeghe · 2010
2,637 citations