Effect of finishing and polishing and aging protocols on the mechanical properties, surface characteristics, and Candida albicans adherence of 3-dimensional–printed and prefabricated dental resins for definitive restorations

da Silva "Biaxial flexure strength and physicochemical characterization of a CAD/CAM lithium disilicate ceramic: effect of etching time, silane, and adhesive applications" Clin Oral Investig (2022) 10.1007/s00784-022-04635-2

[2]

Josic "Clinical longevity of direct and indirect posterior resin composite restorations: an updated systematic review and meta-analysis" Dent Mater (2023) 10.1016/j.dental.2023.10.009

[3]

Kwon "Comparison of the mechanical properties of translucent zirconia and lithium disilicate" J Prosthet Dent (2018) 10.1016/j.prosdent.2017.08.004

[4]

Alp "Effect of surface treatments and coffee thermocycling on the color and translucency of CAD-CAM monolithic glass-ceramic" J Prosthet Dent (2018) 10.1016/j.prosdent.2017.10.024

[5]

Ariaans "Use of molecular indicators of inflammation to assess the biocompatibility of all-ceramic restorations" J Clin Periodontol (2016) 10.1111/jcpe.12500

[6]

Zarone "Current status on lithium disilicate and zirconia: a narrative review" BMC Oral Health (2019) 10.1186/s12903-019-0838-x

[7]

Abdulrahman "Evaluation of the clinical success of four different types of lithium disilicate ceramic restorations: a retrospective study" BMC Oral Health (2021) 10.1186/s12903-021-01987-1

[8]

Maawadh "Repair strength and surface topography of lithium disilicate and hybrid resin ceramics with LLLT and photodynamic therapy in comparison to hydrofluoric acid" J Appl Biomater Funct Mater (2020)

[9]

Hadilou "Effect of different surface treatments on the long-term repair bond strength of aged methacrylate-based resin composite restorations: a systematic review and network meta-analysis" Biomed Res Int (2022) 10.1155/2022/7708643

[10]

Vichi "Flexural resistance of CAD-CAM blocks, part 3: polymer-based restorative materials for permanent restorations" Am J Dent (2020)

[11]

Ling "Fracture toughness and brittleness of novel CAD/CAM resin composite block" Dent Mater (2022) 10.1016/j.dental.2022.11.012

[12]

Dal Piva "CAD-FEA modeling and analysis of different full crown monolithic restorations" Dent Mater (2018) 10.1016/j.dental.2018.06.024

[13]

Suksuphan "Marginal adaptation and fracture resistance of milled and 3D-printed CAD/CAM hybrid dental crown materials with various occlusal thicknesses" J Prosthodont Res (2024) 10.2186/jpr.jpr_d_23_00089

[14]

Pot "Mechanical properties of additive-manufactured composite-based resins for permanent indirect restorations: a scoping review" Mater (Basel) (2024) 10.3390/ma17163951

[15]

Gad "Effect of repair resins and surface treatments on the repair strength of digitally fabricated resin-based dental prostheses: a systematic review of in vitro studies" J Dent (2023)

[16]

Kessler "3D printing in dentistry: state of the art" Oper Dent (2020) 10.2341/18-229-l

[17]

Zhao "3D-printed strong dental crown with multi-scale ordered architecture, high-precision, and bioactivity" Adv Sci (Weinh) (2022)

[18]

Pietrokovski "Comparison of different finishing and polishing systems on surface roughness and bacterial adhesion of resin composite" Mater (Basel) (2022) 10.3390/ma15217415

[19]

Dutra "Does the finishing and polishing of restorative materials affect bacterial adhesion and biofilm formation? A systematic review" Oper Dent (2018) 10.2341/17-073-l

[20]

Ozer "Influence of different finishing-polishing and thermocyclic aging procedures on the surface roughness of nanoceramic hybrid CAD/CAM material" Niger J Clin Pract (2023) 10.4103/njcp.njcp_592_22

[21]

Ramirez-Molina "Influence of polishing protocol on flexural properties of several dental composite resins" Acta Odontol Latinoam (2015)

[22]

Nasoohi "Effects of wet and dry finishing and polishing on surface roughness and microhardness of composite resins" J Dent (Tehran) (2017)

[23]

Ghasemi "Effect of wet and dry finishing and polishing technique on microhardness and flexural strength of nanocomposite resins" Int J Dent (2023) 10.1155/2023/2182094

[24]

Souza "Conversion degree of indirect resin composites and effect of thermocycling on their physical properties" J Prosthodontics (2010) 10.1111/j.1532-849x.2009.00551.x

[25]

de Carvalho "Effect of finishing/polishing techniques and aging on topography, C. albicans adherence, and flexural strength of ultra-translucent zirconia: an in situ study" Clin Oral Investig (2022) 10.1007/s00784-021-04068-3

[26]

Kiomarsi "Effect of thermocycling and surface treatment on the bond strength of composite repair" J Clin Exp Dent (2017)

[27]

Yap "Comparison of flexural properties of composite restoratives using the ISO and mini-flexural tests" J Oral Rehabil (2003) 10.1046/j.1365-2842.2003.01004.x

[28]

da Silva "Effect of different surface treatments and adhesive cementation on the surface topography and flexural strength of translucent and ultra-translucent monolithic zirconia" J Prosthodont (2024)

[29]

(1998)

[30]

Quinn "Material properties and fractography of an indirect dental resin composite" Dent Mater (2010) 10.1016/j.dental.2010.02.008

[31]

Digholkar "Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods" J Indian Prosthodont Soc (2016) 10.4103/0972-4052.191288

[32]

Gadelmawla "Roughness parameters" J Mater Process Technol (2002) 10.1016/s0924-0136(02)00060-2

[33]

Brito "Effect of different salivary glucose concentrations on dual-species biofilms of Candida albicans and Streptococcus mutans" Biofouling (2021) 10.1080/08927014.2021.1946519

[34]

Cohen (1988)

[35]

Tinschert "Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics" J Dent (2000) 10.1016/s0300-5712(00)00030-0

[36]

Prochnow "Effect of etching with distinct hydrofluoric acid concentrations on the flexural strength of a lithium disilicate-based glass ceramic" J Biomed Mater Res (2016) 10.1002/jbm.b.33619

[37]

de Gois Moreira "Influence of build angle, printing layer thickness and aging on the flexural strength, precision, roughness and porosity analysis of a printed resin for provisional restorations" Odontology (2025) 10.1007/s10266-025-01060-1

[38]

Crispim "Influence of build direction, post-polymerization time, and aging on the fracture resistance and marginal and internal discrepancies of three-dimensional printed provisional crowns" Odontology (2024)

[39]

de Gois Moreira "Influence of 3D printing system, postpolymerization and aging protocols on resin flexural strength and dimensional stability for printing occlusal splints, models and temporary restorations" Clin Oral Investig (2024) 10.1007/s00784-024-05998-4

[40]

Çakmak "Surface roughness, optical properties, and microhardness of additively and subtractively manufactured CAD-CAM materials after brushing and coffee thermal cycling" J Prosthodontics (2023)

[41]

Hassan "Creep, hardness, and elastic modulus of lingual fixed retainer adhesives" Materials (2019) 10.3390/ma12040646

[42]

Fidan "Effect of aging and fiber-reinforcement on color stability, translucency, and microhardness of single-shade resin composites versus multi-shade resin composite" J Esthet Restor Dent (2024) 10.1111/jerd.13125

[43]

Jang "Clinical effectiveness of different polishing systems and self-etch adhesives in Class V composite resin restorations: two-year randomized controlled clinical trial" Oper Dent (2017) 10.2341/16-104-c

[44]

St-Pierre "Influence of polishing systems on surface roughness of composite resins: polishability of composite resins" Oper Dent (2019) 10.2341/17-140-l

[45]

Bollen "The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis" Clin Oral Implant Res (1996) 10.1034/j.1600-0501.1996.070302.x

[46]

Shen "Shear bond strength of resin to additively manufactured zirconia with different surface treatments" Surf Interfaces (2024)

[47]

Zhang "Surface roughness and gloss of polished nanofilled and nanohybrid resin composites" J Dent Sci (2021) 10.1016/j.jds.2021.03.003

[48]

Raghavan "Rheology of silica dispersions in organic liquids: new evidence for solvation forces dictated by hydrogen bonding" Langmuir (2000) 10.1021/la991548q

[49]

Hong "Mechanical properties of nanohybrid resin composites containing various mass fractions of modified zirconia particles" Int J Nanomedicine (2020) 10.2147/ijn.s283742

[50]

Contreras-Guerrero "Effect of the surface roughness of dental restorative materials on the in vitro biofilm formation of Streptococcus mutans" Am J Dent (2020)

Showing 50 of 55 references

Metrics

0

Citations

55

References

Details

Published: Apr 01, 2026
Vol/Issue: 157(4)
Pages: 367-382
License: View

Authors

A

Anne Heloyse Teixeira Crispim

J

João Vitor do Nascimento Santos

F

Fernanda Gurgel de Gois Moreira

L

Laryssa Mylenna Madruga Barbosa

L

Larissa Mendonça de Miranda

A

Alessandro D. Loguercio

R

Rodrigo Othávio de Assunção e Souza

Funding

CNPq Award: 001

CAPES

Cite This Article

Anne Heloyse Teixeira Crispim, João Vitor do Nascimento Santos, Fernanda Gurgel de Gois Moreira, et al. (2026). Effect of finishing and polishing and aging protocols on the mechanical properties, surface characteristics, and Candida albicans adherence of 3-dimensional–printed and prefabricated dental resins for definitive restorations. The Journal of the American Dental Association, 157(4), 367-382. https://doi.org/10.1016/j.adaj.2025.10.014

Effect of finishing and polishing and aging protocols on the mechanical properties, surface characteristics, and Candida albicans adherence of 3-dimensional–printed and prefabricated dental resins for definitive restorations

You May Also Like