Potentials of porous materials for energy management in heat exchangers – A comprehensive review

Saman Rashidi; Mohammad Hossein Kashefi; Kyung Chun Kim; Omid Samimi-Abianeh

doi:10.1016/j.apenergy.2019.03.200

journal article Jun 01, 2019

Potentials of porous materials for energy management in heat exchangers – A comprehensive review

Saman Rashidi

Mohammad Hossein Kashefi Kyung Chun Kim

Omid Samimi-Abianeh

Applied Energy Vol. 243 pp. 206-232 · Elsevier BV

View at Publisher Save 10.1016/j.apenergy.2019.03.200

Topics

No keywords indexed for this article. Browse by subject →

References

134

[1]

Leveque F, Robertson A. Pathways for heat: low carbon heat for buildings. A report by carbon connect report: future heat series part; 2014.

[2]

Gholap "Design and multi-objective optimization of heat exchangers for refrigerators" Appl Energy (2007) 10.1016/j.apenergy.2007.02.014

[3]

Gomez-Garcia "Design and performance of a multistage fluidised bed heat exchanger for particle-receiver solar power plants with storage" Appl Energy (2017) 10.1016/j.apenergy.2016.12.140

[4]

Pandey "Optimization of ground heat exchangers for space heating and cooling applications using Taguchi method and utility concept" Appl Energy (2017) 10.1016/j.apenergy.2016.12.154

[5]

Tian "Research on a new type waste heat recovery gravity heat pipe exchanger" Appl Energy (2017) 10.1016/j.apenergy.2016.12.029

[6]

Luo "Thermal enhancement by using grooves and ribs combined with delta-winglet vortex generator in a solar receiver heat exchanger" Appl Energy (2016) 10.1016/j.apenergy.2016.09.077

[7]

Corgnale "Hydrogen desorption using honeycomb finned heat exchangers integrated in adsorbent storage systems" Appl Energy (2018) 10.1016/j.apenergy.2018.01.003

[8]

Performance evaluation of PVA-LiCl coated heat exchangers for next-generation of energy-efficient dehumidification

P. Vivekh, D.T. Bui, Y. Wong et al.

Applied Energy 2019 10.1016/j.apenergy.2019.01.018

[9]

Siddiqui "A novel heat exchanger design procedure for photovoltaic panel cooling application: an analytical and experimental evaluation" Appl Energy (2019) 10.1016/j.apenergy.2019.01.203

[10]

Lia "Review of analytical models for heat transfer by vertical ground heat exchangers (GHEs): a perspective of time and space scales" Appl Energy (2015) 10.1016/j.apenergy.2015.04.070

[11]

Recent developments in solid desiccant coated heat exchangers – A review

P. Vivekh, M. Kumja, D.T. Bui et al.

Applied Energy 2018 10.1016/j.apenergy.2018.08.041

[12]

Pongsoi "Heat transfer and flow characteristics of spiral fin-and-tube heat exchangers: a review" Int J Heat Mass Transf (2014) 10.1016/j.ijheatmasstransfer.2014.07.072

[13]

Elmaaty "Corrugated plate heat exchanger review" Renew Sustain Energy Rev (2017) 10.1016/j.rser.2016.11.266

[14]

Bahiraei "Recent research contributions concerning use of nanofluids in heat exchangers: a critical review" Appl Therm Eng (2018) 10.1016/j.applthermaleng.2018.01.041

[15]

Kumar "A review of heat transfer and fluid flow mechanism in heat exchanger tube with inserts" Chem Eng Process Process Intensif (2017)

[16]

Vafai (2015)

[17]

Rashidi "Porous materials in building energy technologies—a review of the applications, modelling and experiments" Renew Sustain Energy Rev (2018) 10.1016/j.rser.2018.03.092

[18]

De Paepe "The use of open cell metal foams in heat exchangers: possibilities and limitations" (2011)

[19]

Han "A review of metal foam and metal matrix composites for heat exchangers and heat sinks" Heat Transfer Eng (2012) 10.1080/01457632.2012.659613

[20]

Muley "Foam heat exchangers: a technology assessment" Heat Transf Eng (2012) 10.1080/01457632.2011.584817

[21]

Mahdi "Review of convection heat transfer and fluid flow in porous media with nanofluid" Renew Sustain Energy Rev (2015) 10.1016/j.rser.2014.08.040

[22]

Mao "Correlation studies of hydrodynamics and heat transfer in metal foam heat exchangers" Appl Therm Eng (2014) 10.1016/j.applthermaleng.2014.06.035

[23]

Hafeez P. Heat transfer in metal foam heat exchangers at high temperature. A thesis submitted in conformity with the requirements for the degree of Doctor of Philosophy Mechanical and Industrial Engineering Department University of Toronto; 2016.

[24]

Tuzovskaya "Heat exchange performance of stainless steel and carbon foams modified with carbon nano fibers" Int J Heat Mass Transf (2012) 10.1016/j.ijheatmasstransfer.2012.05.073

[25]

Fernandez-Morales "A conceptual design of energy exchange system for recovery of residual heat using aluminum foams" Procedia Mater Sci (2014) 10.1016/j.mspro.2014.07.576

[26]

Dai "A comparison of metal-foam heat exchangers to compact multilouver designs for air-side heat transfer applications" Heat Transf Eng (2012) 10.1080/01457632.2011.584812

[27]

Kim "Flow and heat transfer correlations for porous fin in a plate-fin heat exchanger" J Heat Transf (2000) 10.1115/1.1287170

[28]

Sertkaya "Experimental investigation of thermal performance of aluminum finned heat exchangers and open-cell aluminum foam heat exchangers" Exp Therm Fluid Sci (2012) 10.1016/j.expthermflusci.2011.08.008

[29]

De Schampheleire "Thermal hydraulic performance of 10 PPI aluminium foam as alternative for louvered fins in an HVAC heat exchanger" Appl Therm Eng (2013) 10.1016/j.applthermaleng.2012.09.027

[30]

Bonaccorsi "Synthesis of SAPO-34 on graphite foams for adsorber heat exchangers" Appl Therm Eng (2013) 10.1016/j.applthermaleng.2013.04.053

[31]

Huisseune "Simulation of an aluminum foam heat exchanger using the volume averaging technique" Procedia Mater Sci (2014) 10.1016/j.mspro.2014.07.572

[32]

Lin "A performance analysis of porous graphite foam heat exchangers in vehicles" Appl Therm Eng (2013) 10.1016/j.applthermaleng.2012.08.047

[33]

Odabaee "Metal foam heat exchangers for heat transfer augmentation from a tube bank" Appl Therm Eng (2012) 10.1016/j.applthermaleng.2011.10.063

[34]

(2012)

[35]

Boyd "Air-cooled micro-porous heat exchangers for thermal management of fuel cells" Int Commun Heat Mass Transf (2012) 10.1016/j.icheatmasstransfer.2012.01.006

[36]

Odabaee "Metal foam heat exchangers for thermal management of fuel cell systems–An experimental study" Exp Therm Fluid Sci (2013) 10.1016/j.expthermflusci.2013.07.016

[37]

Chumpia "Performance evaluation of single tubular aluminium foam heat exchangers" Appl Therm Eng (2014) 10.1016/j.applthermaleng.2014.01.071

[38]

Chumpia "Performance evaluation of tubular aluminum foam heat exchangers in single row arrays" Appl Therm Eng (2015) 10.1016/j.applthermaleng.2015.03.015

[39]

Xu "Numerical investigation on self-coupling heat transfer in a counter-flow double-pipe heat exchanger filled with metallic foams" Appl Therm Eng (2014) 10.1016/j.applthermaleng.2014.01.053

[40]

Chandran "Model of an integrated solar thermochemical reactor/reticulated ceramic foam heat exchanger for gas-phase heat recovery" Int J Heat Mass Transf (2015) 10.1016/j.ijheatmasstransfer.2014.10.053

[41]

Huisseune "Comparison of metal foam heat exchangers to a finned heat exchanger for low Reynolds number applications" Int J Heat Mass Transf (2015) 10.1016/j.ijheatmasstransfer.2015.05.013

[42]

Kim "Application of metal foam heat exchangers for a high-performance liquefied natural gas regasification system" Energy (2016) 10.1016/j.energy.2015.10.056

[43]

Yin "Preparation of high porous silicon nitride foams with ultra-thin walls and excellent mechanical performance for heat exchanger application by using a protein foaming method" Ceram Int (2016) 10.1016/j.ceramint.2015.09.128

[44]

Cicala "Experimental evaluation of fluid dynamic and thermal behaviors in compact heat exchanger with aluminum foam" Energy Procedia (2016) 10.1016/j.egypro.2016.11.150

[45]

Baiocco "Neural networks implementation for analysis and control of heat exchange process in a metal foam prototypal device" Procedia CIRP (2017) 10.1016/j.procir.2016.06.035

[46]

Guarino "Fabrication and characterization of an innovative heat exchanger with open cell aluminum foams" Energy Procedia (2017) 10.1016/j.egypro.2017.07.015

[47]

Bamorovat Abadi "Experimental heat transfer and pressure drop in a metal-foam-filled tube heat exchanger" Exp Therm Fluid Sci (2017) 10.1016/j.expthermflusci.2016.10.031

[48]

Lu "Analytical solutions of force convective heat transfer in plate heat exchangers partially filled with metal foams" Int J Heat Mass Transf (2017) 10.1016/j.ijheatmasstransfer.2017.02.087

[49]

Nawaz K, Bock J, Jacobi AM. Thermal-hydraulic performance of metal foam heat exchangers; 2012.

[50]

Nawaz "Thermal-hydraulic performance of metal foam heat exchangers under dry operating conditions" Appl Therm Eng (2017) 10.1016/j.applthermaleng.2017.03.056

Showing 50 of 134 references

Metrics

190

Citations

134

References

Details

Published: Jun 01, 2019
Vol/Issue: 243
Pages: 206-232
License: View

Authors

S

Saman Rashidi

M

Mohammad Hossein Kashefi

Funding

Korean Government Award: 2011-0030013

Cite This Article

Saman Rashidi, Mohammad Hossein Kashefi, Kyung Chun Kim, et al. (2019). Potentials of porous materials for energy management in heat exchangers – A comprehensive review. Applied Energy, 243, 206-232. https://doi.org/10.1016/j.apenergy.2019.03.200

Potentials of porous materials for energy management in heat exchangers – A comprehensive review

You May Also Like