Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study

S.A. Marzouk; M.M. Abou Al-Sood; Emad M.S. El-Said; Magda K. El-Fakharany

doi:10.1016/j.applthermaleng.2019.114696

journal article Feb 01, 2020

Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study

S.A. Marzouk M.M. Abou Al-Sood Emad M.S. El-Said

Magda K. El-Fakharany

Applied Thermal Engineering Vol. 167 pp. 114696 · Elsevier BV

View at Publisher Save 10.1016/j.applthermaleng.2019.114696

Topics

No keywords indexed for this article. Browse by subject →

References

27

[1]

Omidi "A comprehensive review on double pipe heat exchangers" Appl. Therm. Eng. (2017) 10.1016/j.applthermaleng.2016.09.027

[2]

Saha "Friction and heat transfer characteristics of laminar swirl flow through a circular tube fitted with regularly spaced twisted-tape elements" Int. J. Heat Mass Transf. (2001) 10.1016/s0017-9310(01)00077-1

[3]

Naphon "Heat transfer and pressure drop in the horizontal double pipes with and without twisted tape insert" Int. Commun. Heat Mass Transf. (2006) 10.1016/j.icheatmasstransfer.2005.09.007

[4]

Akpinar "Evaluation of heat transfer and exergy loss in a concentric double pipe exchanger equipped with helical wires" Energy Convers. Manage. (2006) 10.1016/j.enconman.2005.12.014

[5]

Yadav "Effect of half length twisted-tape turbulators on heat transfer and pressure drop characteristics inside a double pipe U-bend heat exchanger" Jordan J. Mech. Ind. Eng. (2009)

[6]

Thianpong "Compound heat transfer enhancement of a dimpled tube with a twisted tape swirl generator" Int. Commun. Heat Mass Transf. (2009) 10.1016/j.icheatmasstransfer.2009.03.026

[7]

Eiamsa-ard "Heat transfer enhancement in a tube using delta-winglet twisted tape inserts" Appl. Therm. Eng. (2010) 10.1016/j.applthermaleng.2009.09.006

[8]

Murugesan "Heat transfer and friction factor studies in a circular tube fitted with twisted tape consisting of wire-nails" Chin. J. Chem. Eng. (2010) 10.1016/s1004-9541(09)60166-x

[9]

Huang "Enhancing heat transfer in the core flow by using porous medium insert in a tube" Int. J. Heat Mass Transf. (2010) 10.1016/j.ijheatmasstransfer.2009.10.038

[10]

Guo "A numerical study on heat transfer and friction factor characteristics of laminar flow in a circular tube fitted with center-cleared twisted tape" Int. J. Therm. Sci. (2011) 10.1016/j.ijthermalsci.2011.02.010

[11]

Zhang "Numerical studies on heat transfer and flow characteristics for laminar flow in a tube with multiple regularly spaced twisted tapes" Int. J. Therm. Sci. (2012) 10.1016/j.ijthermalsci.2012.02.025

[12]

Chang "Heat transfer and pressure drop measurements for tubes fitted with twin and four twisted fins on rod" Exp. Therm Fluid Sci. (2016) 10.1016/j.expthermflusci.2016.01.001

[13]

Suri "Heat transfer enhancement of heat exchanger tube with multiple square perforated twisted tape inserts: Experimental investigation and correlation development" Chem. Eng. Process. Process Intensif. (2017) 10.1016/j.cep.2017.02.014

[14]

Wijayanta "Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger" Appl. Therm. Eng. (2018) 10.1016/j.applthermaleng.2018.09.009

[15]

Kumar "A review of heat transfer and fluid flow mechanism in heat exchanger tube with inserts" Chem. Eng. Process. – Process Intensification (2018) 10.1016/j.cep.2017.11.007

[16]

Andrzejczyk "Experimental investigation of heat transfer enhancement in straight and U-bend double-pipe heat exchanger with wire insert" Chem. Eng. Process. – Process Intensification (2019) 10.1016/j.cep.2019.01.003

[17]

Syam Sundar "Heat transfer and effectiveness experimentally-based analysis of wire coil with core-rod inserted in Fe3O4/water nanofluid flow in a double pipe U-bend heat exchanger" Int. J. Heat Mass Transf. (2019) 10.1016/j.ijheatmasstransfer.2019.01.041

[18]

Eiamsa-ard "A case study on thermal performance assessment of a heat exchanger tube equipped with regularly-spaced twisted tapes as swirl generators" Case Stud. Therm. Eng. (2014) 10.1016/j.csite.2014.04.002

[19]

Mellal "Hydro-thermal shell-side performance evaluation of a shell and tube heat exchanger under different baffle arrangement and orientation" Int. J. Therm. Sci. (2017) 10.1016/j.ijthermalsci.2017.07.011

[20]

Ayub "Performance characteristics of a novel shell and tube heat exchanger with shell side interstitial twisted tapes for viscous fluids application" Appl. Therm. Eng. (2018) 10.1016/j.applthermaleng.2018.01.054

[21]

El-Said "Experimental investigation of air injection effect on the performance of horizontal shell and multi-tube heat exchanger with baffles" Appl. Therm. Eng. (2018) 10.1016/j.applthermaleng.2018.02.001

[22]

El-Said "Shell and tube heat exchanger with new segmental baffles configurations: a comparative experimental investigation" Appl. Therm. Eng. (2019) 10.1016/j.applthermaleng.2019.01.039

[23]

Bichkar "Study of shell and tube heat exchanger with the effect of types of baffles" Procedia Manuf. (2018) 10.1016/j.promfg.2018.02.028

[24]

Çengel (2007)

[25]

Durmuş "Heat transfer and energy loss in a concentric heat exchanger with snail entrance" Int. Commun. Heat Mass Transfer (2002) 10.1016/s0735-1933(02)00320-2

[26]

Esfahani "Exergy analysis of a shell-and-tube heat exchanger using graphene oxide nanofluids" Exp. Therm Fluid Sci. (2017) 10.1016/j.expthermflusci.2016.12.004

[27]

Gao "Experimental study of effects of baffle helix angle on shell-side performance of shell-and-tube heat exchangers with discontinuous helical baffles" Exp. Therm Fluid Sci. (2015) 10.1016/j.expthermflusci.2015.04.011

Cited By

43

Review on heat transfer augmentation in helically coiled tube heat exchanger

Md Atiqur Rahman · 2024

International Journal of Thermoflui...

Enhanced performance assessment of an integrated evacuated tube and flat plate collector solar air heater with thermal storage material

Magda K. El-Fakharany, Aly-Eldeen A. Abo-Samra · 2024

Applied Thermal Engineering

A comprehensive review of methods of heat transfer enhancement in shell and tube heat exchangers

S. A. Marzouk, M. M. Abou Al-Sood · 2023

Journal of Thermal Analysis and Cal...

Machine learning algorithms for improving the prediction of air injection effect on the thermohydraulic performance of shell and tube heat exchanger

Emad M.S. El-Said, Mohamed Abd Elaziz · 2021

Applied Thermal Engineering

Metrics

43

Citations

27

References

Details

Published: Feb 01, 2020
Vol/Issue: 167
Pages: 114696
License: View

Authors

Magda K. El-Fakharany

Funding

Kafrelsheikh University, Faculty of Engineering

Cite This Article

S.A. Marzouk, M.M. Abou Al-Sood, Emad M.S. El-Said, et al. (2020). Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study. Applied Thermal Engineering, 167, 114696. https://doi.org/10.1016/j.applthermaleng.2019.114696

Effect of wired nails circular–rod inserts on tube side performance of shell and tube heat exchanger: Experimental study

You May Also Like