Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank’s balanced salt solution

S. Mendis; W. XU; H.P. Tang; L.A. Jones; D. Liang; R. Thompson; P. Choong; M. Brandt; M. Qian

doi:10.1016/j.apsusc.2019.145013

journal article Mar 01, 2020

Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank’s balanced salt solution

S. Mendis W. XU

H.P. Tang L.A. Jones D. Liang R. Thompson P. Choong M. Brandt

M. Qian

Applied Surface Science Vol. 506 pp. 145013 · Elsevier BV

View at Publisher Save 10.1016/j.apsusc.2019.145013

Topics

No keywords indexed for this article. Browse by subject →

References

45

[1]

Long "Titanium alloys in total joint replacement—a materials science perspective" Biomaterials (1998) 10.1016/s0142-9612(97)00146-4

[2]

Mechanical properties of biomedical titanium alloys

Mitsuo Niinomi

Materials Science and Engineering: A 1998 10.1016/s0921-5093(97)00806-x

[3]

Niinomi "Recent metallic materials for biomedical applications" Metall. Mat. Trans. A (2002) 10.1007/s11661-002-0109-2

[4]

Okazaki "Effect of alloying elements on mechanical properties of titanium alloys for medical implants" Mater. Trans., JIM (1993) 10.2320/matertrans1989.34.1217

[5]

Okazaki "Cytocompatibility of various metal and development of new titanium alloys for medical implants" Mater. Sci. Eng.: A (1998) 10.1016/s0921-5093(97)00809-5

[6]

Abdel-Hady "General approach to phase stability and elastic properties of β-type Ti-alloys using electronic parameters" Scripta Mater. (2006) 10.1016/j.scriptamat.2006.04.022

[7]

Kobayashi "Mechanical properties and corrosion resistance of Ti–6Al–7Nb alloy dental castings" J. Mater. Sci.: Mater. Med. (1998)

[8]

Effect of thermomechanical processing on microstructure of a Ti–13Nb–13Zr alloy

M Geetha, A.K Singh, K Muraleedharan et al.

Journal of Alloys and Compounds 2001 10.1016/s0925-8388(01)01604-8

[9]

Geetha "Effect of thermomechanical processing on evolution of various phases in Ti–Nb–Zr alloys" J. Alloys Comp. (2004) 10.1016/j.jallcom.2004.04.113

[10]

Niinomi "Development of low rigidity. BETA.-type titanium alloy for biomedical applications" Mater. Trans. (2002) 10.2320/matertrans.43.2970

[11]

Geetha "Ti based biomaterials, the ultimate choice for orthopaedic implants – a review" Progr. Mater. Sci. (2009) 10.1016/j.pmatsci.2008.06.004

[12]

Nguyen "A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)" Intermetallics (2018) 10.1016/j.intermet.2018.07.008

[13]

Nguyen "Compositional design of strong and ductile (tensile) Ti-Zr-Nb-Ta medium entropy alloys (MEAs) using the atomic mismatch approach" Mater. Sci. Eng.: A (2019) 10.1016/j.msea.2018.11.054

[14]

Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

Takeshi Nagase, Mitsuharu Todai, Takao Hori et al.

Journal of Alloys and Compounds 2018 10.1016/j.jallcom.2018.04.082

[15]

Abou-Ras "Comprehensive comparison of various techniques for the analysis of elemental distributions in thin films" Microscopy Microanal. (2011) 10.1017/s1431927611000523

[16]

C.D. Wagner AVN, A. Kraut-Vass, S.W. Gaarenstroom, C.J. Powell. NIST X-ray Photoelectron Spectroscopy Database. October, 2012 ed: U.S. Secretary of Commerce.

[17]

J.F. Moulder, J. Chastain, Handbook of X-ray Photoelectron Spectroscopy: A Reference Book of Standard Spectra for Identification and Interpretation of XPS Data: Physical Electronics, 1995.

[18]

Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni

Mark C. Biesinger, Brad P. Payne, Andrew P. Grosvenor et al.

Applied Surface Science 2011 10.1016/j.apsusc.2010.10.051

[19]

Ohno "Effects of Coster-Kronig fluctuation and decay on X-ray photoelectron spectroscopy spectra" J. Electron Spectrosc. Related Phenom. (2003) 10.1016/s0368-2048(03)00109-9

[20]

McCafferty "An X-ray photoelectron spectroscopy sputter profile study of the native air-formed oxide film on titanium" Appl. Surf. Sci. (1999) 10.1016/s0169-4332(98)00927-1

[21]

Characterization of air-formed surface oxide film on Ti–29Nb–13Ta–4.6Zr alloy surface using XPS and AES

Y. Tanaka, M. Nakai, T. Akahori et al.

Corrosion Science 2008 10.1016/j.corsci.2008.06.002

[22]

Schultze "Single crystal experiments on grains of polycrystalline materials: oxide formation on Zr and Ta" Faraday Discuss. (2002) 10.1039/b111216n

[23]

Hassel "Initial stages of cathodic breakdown of thin anodic aluminium oxide films" Electrochim. Acta (1995) 10.1016/0013-4686(94)00315-r

[24]

Lide (2005)

[25]

Sieradzki "A percolation model for passivation in stainless steels" J. Electrochem. Soc. (1986) 10.1149/1.2109065

[26]

Zallen (2005)

[27]

Ask "Preparation and surface spectroscopic characterization of oxide films on Ti6Al4V" Appl. Surf. Sci. (1989) 10.1016/0169-4332(89)90013-5

[28]

Vaithilingam "Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications" Mater. Sci. Eng.: C (2016) 10.1016/j.msec.2016.05.054

[29]

Variola "Tailoring the surface properties of Ti6Al4V by controlled chemical oxidation" Biomaterials (2008) 10.1016/j.biomaterials.2007.11.040

[30]

de Souza "Preparation and characterization of Ti–Ta alloys for application in corrosive media" Mater. Lett. (2003) 10.1016/s0167-577x(02)01422-2

[31]

Mareci "Comparative corrosion study of Ti–Ta alloys for dental applications" Acta Biomater. (2009) 10.1016/j.actbio.2009.05.037

[32]

Mareci "Electrochemical aspects of Ti–Ta alloys in HBSS" Mater. Corros. (2010) 10.1002/maco.200905527

[33]

Steven "Influence of niobium and zirconium alloying additions on the anodic dissolution behavior of activated titanium in HCl solutions" J. Electrochem. Soc. (2001) 10.1149/1.1337605

[34]

Yu "Effects of Nb and Zr alloying additions on the activation behavior of Ti in hydrochloric acid" J. Electrochem. Soc. (1999) 10.1149/1.1392655

[35]

Macdonald "The point defect model for the passive state" J. Electrochem. Soc. (1992) 10.1149/1.2069096

[36]

The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution

M Metikos̆-Huković, A Kwokal, J Piljac

Biomaterials 2003 10.1016/s0142-9612(03)00252-7

[37]

Zhou "Corrosion resistance and biocompatibility of Ti–Ta alloys for biomedical applications" Mater. Sci. Eng.: A (2005) 10.1016/j.msea.2005.03.032

[38]

Maynor "The scaling of titanium and titanium-base alloys in air" Corrosion (1956) 10.5006/0010-9312-12.6.49

[39]

Bai "Electrochemical corrosion behavior of Ti–24Nb–4Zr–8Sn alloy in a simulated physiological environment" Appl. Surf. Sci. (2012) 10.1016/j.apsusc.2011.12.096

[40]

Padilla "Electrochemical characterization of albumin protein on Ti-6AL-4V alloy immersed in a simulated plasma solution" J. Biomed. Mater. Res. Part A (2007) 10.1002/jbm.a.31046

[41]

Cheng "Corrosion behavior of titanium in the presence of calcium phosphate and serum proteins" Biomaterials (2005) 10.1016/j.biomaterials.2005.05.047

[42]

Pan "Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application" Electrochim. Acta (1996) 10.1016/0013-4686(95)00465-3

[43]

Shoar Abouzari "On the physical interpretation of constant phase elements" Solid State Ionics (2009) 10.1016/j.ssi.2009.04.002

[44]

Zhou "Effects of Ta content on Young’s modulus and tensile properties of binary Ti–Ta alloys for biomedical applications" Mater. Sci. Eng.: A (2004) 10.1016/j.msea.2003.12.011

[45]

Zhou "Comparison of various properties between titanium-tantalum alloy and pure titanium for biomedical applications" Mater. Trans. (2007) 10.2320/matertrans.48.380

Metrics

48

Citations

45

References

Details

Published: Mar 01, 2020
Vol/Issue: 506
Pages: 145013
License: View

Authors

Funding

Australian Research Council Award: LP140100607

Cite This Article

S. Mendis, W. XU, H.P. Tang, et al. (2020). Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank’s balanced salt solution. Applied Surface Science, 506, 145013. https://doi.org/10.1016/j.apsusc.2019.145013

Characteristics of oxide films on Ti-(10–75)Ta alloys and their corrosion performance in an aerated Hank’s balanced salt solution

You May Also Like