3D bioprinting for engineering complex tissues

Christian Mandrycky; Zongjie Wang; Keekyoung Kim; Deok-Ho Kim

doi:10.1016/j.biotechadv.2015.12.011

journal article Jul 01, 2016

3D bioprinting for engineering complex tissues

Christian Mandrycky

Zongjie Wang

Keekyoung Kim

Deok-Ho Kim

Biotechnology Advances Vol. 34 No. 4 pp. 422-434 · Elsevier BV

View at Publisher Save 10.1016/j.biotechadv.2015.12.011

Topics

No keywords indexed for this article. Browse by subject →

References

144

[1]

Abouna "Organ shortage crisis: problems and possible solutions" Transplant. Proc. (2008) 10.1016/j.transproceed.2007.11.067

[2]

Functional materials by electrospinning of polymers

Seema Agarwal, Andreas Greiner, Joachim H. Wendorff

Progress in Polymer Science 2013 10.1016/j.progpolymsci.2013.02.001

[3]

Arai "Three-dimensional inkjet biofabrication based on designed images" Biofabrication (2011) 10.1088/1758-5082/3/3/034113

[4]

Araujo "Novel porous scaffolds of pH responsive chitosan/carrageenan-based polyelectrolyte complexes for tissue engineering" J. Biomed. Mater. Res. A (2014)

[5]

Bajaj "3D biofabrication strategies for tissue engineering and regenerative medicine" Annu. Rev. Biomed. Eng. (2014) 10.1146/annurev-bioeng-071813-105155

[6]

Balakrishnan "Anti-bacterial properties of an in situ forming hydrogel based on oxidized alginate and gelatin loaded with gentamycin" Trends Biomater. Artif. Organs (2012)

[7]

Conductive polymers: Towards a smart biomaterial for tissue engineering

Richard Balint, Nigel J. Cassidy, Sarah H. Cartmell

Acta Biomaterialia 2014 10.1016/j.actbio.2014.02.015

[8]

Ballyns "Image-guided tissue engineering of anatomically shaped implants via MRI and micro-CT using injection molding" Tissue Eng. A (2008) 10.1089/ten.tea.2007.0186

[9]

Bauer "Spot identification and quality control in cell-based microarrays" ACS Comb. Sci. (2012) 10.1021/co300039w

[10]

Benson "Cell adhesion behavior in 3D hydrogel scaffolds functionalized with d- or l-aminoacids" Macromol. Biosci. (2014) 10.1002/mabi.201300485

[11]

Bertassoni "Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels" Biofabrication (2014) 10.1088/1758-5082/6/2/024105

[12]

Bertassoni "Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs" Lab Chip (2014) 10.1039/c4lc00030g

[13]

Billiet "A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering" Biomaterials (2012) 10.1016/j.biomaterials.2012.04.050

[14]

Bohandy "Metal deposition from a supported metal film using an excimer laser" J. Appl. Phys. (1986) 10.1063/1.337287

[15]

Bracci "Transient sunitinib resistance in gastrointestinal stromal tumors" N. Engl. J. Med. (2013) 10.1056/nejmc1301237

[16]

Burleson "Use of 3D printers to create a patient-specific 3D bolus for external beam therapy" J. Appl. Clin. Med. Phys. (2015) 10.1120/jacmp.v16i3.5247

[17]

Catros "Laser-assisted bioprinting for creating on-demand patterns of human osteoprogenitor cells and nano-hydroxyapatite" Biofabrication (2011) 10.1088/1758-5082/3/2/025001

[18]

Catros "Effect of laser energy, substrate film thickness and bioink viscosity on viability of endothelial cells printed by laser-assisted bioprinting" Appl. Surf. Sci. (2011) 10.1016/j.apsusc.2010.11.049

[19]

Chang "Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies" J. Biomed. Mater. Res. B Appl. Biomater. (2011) 10.1002/jbm.b.31831

[20]

Chang "Biofabrication of a three-dimensional liver micro-organ as an in vitro drug metabolism model" Biofabrication (2010) 10.1088/1758-5082/2/4/045004

[21]

Cui "Direct human cartilage repair using three-dimensional bioprinting technology" Tissue Eng. A (2012) 10.1089/ten.tea.2011.0543

[22]

Cui "Synergistic action of fibroblast growth factor-2 and transforming growth factor-beta1 enhances bioprinted human neocartilage formation" Biotechnol. Bioeng. (2012) 10.1002/bit.24488

[23]

Cui "Accelerated myotube formation using bioprinting technology for biosensor applications" Biotechnol. Lett. (2013) 10.1007/s10529-012-1087-0

[24]

Tissue Cells Feel and Respond to the Stiffness of Their Substrate

Dennis E. Discher, Paul Janmey, Yu-li Wang

Science 2005 10.1126/science.1116995

[25]

Dolati "In vitro evaluation of carbon-nanotube-reinforced bioprintable vascular conduits" Nanotechnology (2014) 10.1088/0957-4484/25/14/145101

[26]

Dou "Novel pH responsive hydrogels for controlled cell adhesion and triggered surface detachment" Soft Matter (2012) 10.1039/c2sm26442k

[27]

Duan "3D bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels" J. Biomed. Mater. Res. A (2013) 10.1002/jbm.a.34420

[28]

Duarte Campos "Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid" Biofabrication (2013) 10.1088/1758-5082/5/1/015003

[29]

Duocastella "Study of the laser-induced forward transfer of liquids for laser bioprinting" Appl. Surf. Sci. (2007) 10.1016/j.apsusc.2007.02.097

[30]

Gao "Preparation and dimming performance study of PNIPAm thermal hydrogel" Appl. Mech. Mater. (2012) 10.4028/www.scientific.net/amm.236-237.99

[31]

Gauvin "Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography" Biomaterials (2012) 10.1016/j.biomaterials.2012.01.048

[32]

Gillette "Dynamic hydrogels: switching of 3D microenvironments using two-component naturally derived extracellular matrices" Adv. Mater. (2010) 10.1002/adma.200902265

[33]

Glowacki "Collagen scaffolds for tissue engineering" Biopolymers (2008) 10.1002/bip.20871

[34]

Bio-inspired detoxification using 3D-printed hydrogel nanocomposites

Maling Gou, Xin Qu, Wei Zhu et al.

Nature Communications 2014 10.1038/ncomms4774

[35]

Grogan "Digital micromirror device projection printing system for meniscus tissue engineering" Acta Biomater. (2013) 10.1016/j.actbio.2013.03.020

[36]

Gruene "Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells" Biofabrication (2011) 10.1088/1758-5082/3/1/015005

[37]

Gruene "Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting" Biomed. Eng. Online (2011) 10.1186/1475-925x-10-19

[38]

Guillemot "High-throughput laser printing of cells and biomaterials for tissue engineering" Acta Biomater. (2010) 10.1016/j.actbio.2009.09.029

[39]

Guillotin "Laser assisted bioprinting of engineered tissue with high cell density and microscale organization" Biomaterials (2010) 10.1016/j.biomaterials.2010.05.055

[40]

Harrison "Oxygen producing biomaterials for tissue regeneration" Biomaterials (2007) 10.1016/j.biomaterials.2007.07.003

[41]

Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels

Thomas J. Hinton, Quentin Jallerat, Rachelle N. Palchesko et al.

Science Advances 2015 10.1126/sciadv.1500758

[42]

Hobkirk "Definitions in biomaterials" Clin. Mater. (1988) 10.1016/0267-6605(88)90064-9

[43]

Hong "Cellular behavior in micropatterned hydrogels by bioprinting system depended on the cell types and cellular interaction" J. Biosci. Bioeng. (2013) 10.1016/j.jbiosc.2013.02.011

[44]

Hsu "Patient-specific 3-dimensional printed titanium truss cage with tibiotalocalcaneal arthrodesis for salvage of persistent distal tibia nonunion" Foot Ankle Spec. (2015) 10.1177/1938640015593079

[45]

Huang "3D printing of biomimetic microstructures for cancer cell migration" Biomed. Microdevices (2014) 10.1007/s10544-013-9812-6

[46]

Huh "JALA special issue: microengineered cell- and tissue-based assays for drug screening and toxicology applications" J. Lab. Autom. (2015) 10.1177/2211068215574458

[47]

Hutmacher "Scaffolds in tissue engineering bone and cartilage" Biomaterials (2000) 10.1016/s0142-9612(00)00121-6

[48]

Jakus "Three-dimensional printing of high-content graphene scaffolds for electronic and biomedical applications" ACS Nano (2015) 10.1021/acsnano.5b01179

[49]

Jiao "Thermoresponsive nanofabricated substratum for the engineering of three-dimensional tissues with layer-by-layer architectural control" ACS Nano (2014) 10.1021/nn4063962

[50]

Kattamis "Thick film laser induced forward transfer for deposition of thermally and mechanically sensitive materials" Appl. Phys. Lett. (2007) 10.1063/1.2799877

Showing 50 of 144 references

Cited By

1,566

A framework for digital twin integration in biofabrication and a scaffold 3D bioplotting case study

Nafi Ahmed, Lokesh Karthik Narayanan · 2024

Manufacturing Letters

Skin-interfaced electronics: A promising and intelligent paradigm for personalized healthcare

Yangzhi Zhu, Jinghang Li · 2023

Biomaterials

mSLA-based 3D printing of acrylated epoxidized soybean oil - nano-hydroxyapatite composites for bone repair

Dibakar Mondal, Zahra Haghpanah · 2021

Materials Science and Engineering:...

Recent advances in three‐dimensional bioprinting of stem cells

Sindhuja D. Eswaramoorthy, Seeram Ramakrishna · 2019

Journal of Tissue Engineering and R...

3D Printing of Poly(propylene fumarate) Oligomers: Evaluation of Resin Viscosity, Printing Characteristics and Mechanical Properties

Yuanyuan Luo, Gaëlle Le Fer · 2019

Biomacromolecules

Instructive microenvironments in skin wound healing: Biomaterials as signal releasing platforms

Oscar Castaño, Soledad Pérez-Amodio · 2018

Advanced Drug Delivery Reviews

Metrics

1,566

Citations

144

References

Details

Published: Jul 01, 2016
Vol/Issue: 34(4)
Pages: 422-434
License: View

Authors

C

Christian Mandrycky

Department of Bioengineering, University of Washington, Seattle, WA 98195, USA.; Center for Cardiovascular Biology, and Institute of Stem Cell and Regenerative Medicine, University of Washington, Seattle, WA 98109, USA.

Z

Zongjie Wang

Chan Zuckerberg Biohub Chicago Chicago USA

Funding

National Institutes of Health Award: R21AR064395

Natural Sciences and Engineering Research Council of Canada Award: RGPIN-2014-04010

Muscular Dystrophy Association Award: MDA255907

Cite This Article

Christian Mandrycky, Zongjie Wang, Keekyoung Kim, et al. (2016). 3D bioprinting for engineering complex tissues. Biotechnology Advances, 34(4), 422-434. https://doi.org/10.1016/j.biotechadv.2015.12.011

3D bioprinting for engineering complex tissues

You May Also Like