Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

Sheng Feng; Chujun Zheng; Zhiyang Song; Xiangwei Wu; Meifen Wu; Zhaoyin Wen

doi:10.1016/j.cej.2023.146090

journal article Nov 01, 2023

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

Sheng Feng

Chujun Zheng Zhiyang Song Xiangwei Wu

Meifen Wu Zhaoyin Wen

Chemical Engineering Journal Vol. 475 pp. 146090 · Elsevier BV

View at Publisher Save 10.1016/j.cej.2023.146090

Topics

No keywords indexed for this article. Browse by subject →

References

58

[1]

Hwang "Sodium-ion batteries: present and future" Chem. Soc. Rev. (2017) 10.1039/c6cs00776g

[2]

Hirsh "Sodium-ion batteries paving the way for grid energy storage" Adv. Energy Mater. (2020) 10.1002/aenm.202001274

[3]

Komaba "Sodium-driven rechargeable batteries: an effort towards a future energy storage" Chem. Lett. (2020) 10.1246/cl.200568

[4]

Tarascon "Na-ion versus li-ion batteries: complementarity rather than competitiveness" Joule. (2020) 10.1016/j.joule.2020.06.003

[5]

Xiang "Recent advances and prospects of cathode materials for sodium-ion batteries" Adv. Mater. (2015) 10.1002/adma.201501527

[6]

From Li‐Ion Batteries toward Na‐Ion Chemistries: Challenges and Opportunities

Kudakwashe Chayambuka, Grietus Mulder, Dmitri L. Danilov et al.

Advanced Energy Materials 2020 10.1002/aenm.202001310

[7]

Goikolea "Na-ion batteries—approaching old and new challenges" Adv. Energy Mater. (2020) 10.1002/aenm.202002055

[8]

Sun "Direction for commercialization of O3-Type layered cathodes for sodium-ion batteries" ACS Energy Lett. (2020) 10.1021/acsenergylett.0c00597

[9]

Shraer "Development of vanadium-based polyanion positive electrode active materials for high-voltage sodium-based batteries" Nat. Commun. (2022) 10.1038/s41467-022-31768-5

[10]

Peng "Prussian blue analogues for sodium-ion batteries: past, present and future" Adv. Mater. (2021)

[11]

Gao "Recent advances and prospects of layered transition metal oxide cathodes for sodium-ion batteries" Energy Storage Mater. (2020) 10.1016/j.ensm.2020.04.040

[12]

Ren "Unraveling anionic redox for sodium layered oxide cathodes: breakthroughs and perspectives" Adv. Mater. (2021)

[13]

Review—Research Progress on Layered Transition Metal Oxide Cathode Materials for Sodium Ion Batteries

Fanglin Wei, Qiaoping Zhang, Peng Zhang et al.

Journal of The Electrochemical Society 2021 10.1149/1945-7111/abf9bf

[14]

Zhang "Organic cathode materials for sodium-ion batteries: from fundamental research to potential commercial application" Adv. Funct. Mater. (2021)

[15]

Kanwade "Transition metal oxides as a cathode for indispensable Na-ion batteries" RSC Adv. (2022) 10.1039/d2ra03601k

[16]

Structural classification and properties of the layered oxides

C. Delmas, C. Fouassier, P. Hagenmuller

Physica B+C 1980 10.1016/0378-4363(80)90214-4

[17]

Yabuuchi "Recent research progress on iron- and manganese-based positive electrode materials for rechargeable sodium batteries" Sci. Technol. Adv. Mater. (2014) 10.1088/1468-6996/15/4/043501

[18]

Q.W. Chenglong Zhao, Rational design of layered oxide materials for sodium-ion batteries., Science. (2020).

[19]

Kim "Layered Na[Ni1/3Fe1/3Mn1/3]O2 cathodes for Na-ion battery application" Electrochem. Commun. (2012) 10.1016/j.elecom.2012.02.020

[20]

Wang "Large-scale synthesis of NaNi 1/3 Fe 1/3 Mn 1/3 O 2 as high performance cathode materials for sodium ion batteries" J. Electrochem. Soc. (2016) 10.1149/2.0011605jes

[21]

Lee "Multiscale factors in designing alkali-ion (Li, Na, and K) transition metal inorganic compounds for next-generation rechargeable batteries" Energ. Environ. Sci. (2020) 10.1039/d0ee01277g

[22]

Sun "Degradation mechanism of O3-Type NaNi1/3Fe1/3Mn1/3O2 cathode materials during ambient storage and their in situ regeneration" ACS Appl. Energy Mater. (2021)

[23]

Origin of Air-Stability for Transition Metal Oxide Cathodes in Sodium-Ion Batteries

Chenlu Xu, Haoran Cai, Qinlong Chen et al.

ACS Applied Materials & Interfaces 2022 10.1021/acsami.1c21103

[24]

Y. Li, M. Chen, B. Liu, Y. Zhang, X. Liang, X. Xia, Heteroatom Doping: An Effective Way to Boost Sodium Ion Storage, Adv. Energy Mater. n/a (n.d.) 2000927. https://doi.org/10.1002/aenm.202000927. 10.1002/aenm.202000927

[25]

Wang "Improved cycle and air stability of P3-Na0.65Mn0.75Ni0.25O2 electrode for sodium-ion batteries coated with metal phosphates" Chem. Eng. J. (2019) 10.1016/j.cej.2019.05.010

[26]

Yu "Understanding the multiple effects of TiO2 coating on NaMn0.33Fe0.33Ni0.33O2 cathode material for na-ion batteries" ACS Appl. Energy Mater. (2020) 10.1021/acsaem.9b02021

[27]

Lamb "Surface-modified Na(Ni 0.3 Fe 0.4 Mn 0.3)O 2 cathodes with enhanced cycle life and air stability for sodium-ion batteries" ACS Appl. Energy Mater. (2021) 10.1021/acsaem.1c02485

[28]

Jo "Facilitating sustainable oxygen-redox chemistry for P3-type cathode materials for sodium-ion batteries" Energy Storage Mater. (2022) 10.1016/j.ensm.2022.01.028

[29]

Xiao "Layered oxide cathodes promoted by structure modulation technology for sodium-ion batteries" Adv. Funct. Mater. (2020) 10.1002/adfm.202001334

[30]

Wang "Ti-substituted NaNi0.5Mn0.5-xTixO2 cathodes with reversible O3–P3 phase transition for high-performance sodium-ion batteries" Adv. Mater. (2017) 10.1002/adma.201700210

[31]

A Chemical Approach to Raise Cell Voltage and Suppress Phase Transition in O3 Sodium Layered Oxide Electrodes

Mariyappan Sathiya, Quentin Jacquet, Marie‐Liesse Doublet et al.

Advanced Energy Materials 2018 10.1002/aenm.201702599

[32]

Deng "Li-substituted layered spinel cathode material for sodium ion batteries" Chem. Mater. (2018) 10.1021/acs.chemmater.8b02614

[33]

Zhang "F-doped O3-NaNi1/3Fe1/3Mn1/3O2 as high-performance cathode materials for sodium-ion batteries" Sci. China Mater. (2017) 10.1007/s40843-017-9045-9

[34]

Sun "Insight into ca-substitution effects on O3-Type NaNi1/3Fe1/3Mn1/3O2 cathode materials for sodium-ion batteries application" Small (2018) 10.1002/smll.201704523

[35]

Zhang "New insights into the roles of Mg in improving the rate capability and cycling stability of O3-NaMn 0.48 Ni 0.2 Fe 0.3 Mg 0.02 O 2 for sodium-ion batteries" ACS Appl. Mater. Interfaces (2018) 10.1021/acsami.7b18226

[36]

Cui "Insights into the improved cycle and rate performance by ex-situ F and in-situ Mg dual doping of layered oxide cathodes for sodium-ion batteries" Energy Storage Mater. (2022) 10.1016/j.ensm.2021.11.016

[37]

C. Cheng, M. Ding, T. Yan, J. Jiang, J. Mao, X. Feng, T.-S. Chan, N. Li, L. Zhang, Anionic Redox Activities Boosted by Aluminum Doping in Layered Sodium‐Ion Battery Electrode, Small Methods. (2022) 2101524. https://doi.org/10.1002/smtd.202101524. 10.1002/smtd.202101524

[38]

Wang "Reaching the energy density limit of layered O3-NaNi0.5Mn0.5O2 electrodes via dual Cu and Ti substitution" Adv. Energy Mater. (2019) 10.1002/aenm.201901785

[39]

Mu "Prototype sodium-ion batteries using an air-stable and co/ni-free o3-layered metal oxide cathode" Adv. Mater. (2015) 10.1002/adma.201502449

[40]

Yue "Spray-drying synthesized LiNi0.6Co0.2Mn0.2O2 and its electrochemical performance as cathode materials for lithium ion batteries" Powder Technol. (2011) 10.1016/j.powtec.2011.08.022

[41]

Yao "Microstructure boosting the cycling stability of LiNi0.6Co0.2Mn0.2O2 cathode through Zr-based dual modification" Energy Storage Mater. (2021) 10.1016/j.ensm.2020.12.026

[42]

Zhao "Revealing high Na-content P2-type layered oxides as advanced sodium-ion cathodes" J. Am. Chem. Soc. (2020) 10.1021/jacs.9b13572

[43]

Using High-Entropy Configuration Strategy to Design Na-Ion Layered Oxide Cathodes with Superior Electrochemical Performance and Thermal Stability

Feixiang Ding, Chenglong Zhao, Dongdong Xiao et al.

Journal of the American Chemical Society 2022 10.1021/jacs.2c02353

[44]

Song "High-voltage stabilization of O3-type layered oxide for sodium-ion batteries by simultaneous tin dual modification" Chem. Mater. Publ. Am. Chem. Soc. (2022)

[45]

Wang "Suppressing the P2–O2 phase transition of Na 0.67 Mn 0.67 Ni 0.33 O 2 by magnesium substitution for improved sodium-ion batteries" Angew. Chem. Int. Ed. (2016) 10.1002/anie.201602202

[46]

Sendova-Vassileva "Raman spectroscopy study on Na2/3Mn1-xFexO2 oxides" Adv. Sci. Technol. (2011) 10.4028/www.scientific.net/ast.74.60

[47]

Xie "Mathematical modeling of the electrochemical impedance spectroscopy in lithium ion battery cycling" Electrochim. Acta (2014) 10.1016/j.electacta.2014.02.035

[48]

Hu "Application of electrochemical impedance spectroscopy to degradation and aging research of lithium-ion batteries" J. Phys. Chem. C (2023) 10.1021/acs.jpcc.3c00033

[49]

Mu "Deciphering the cathode-electrolyte interfacial chemistry in sodium layered cathode materials" Adv. Energy Mater. (2018) 10.1002/aenm.201801975

[50]

Zou "Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability" Nat. Commun. (2019) 10.1038/s41467-019-11299-2

Showing 50 of 58 references

Cited By

106

Dual-Gradient Structural Design for Synchronized Phase Transitions and Stress-Resilient O3-Type Sodium Cathodes

Yang Gu, Shengya He · 2026

ACS Nano

Progress and perspective of Na1-δNixFeyMnzO2 cathode for high-energy-density and long-cycle-life sodium‐ion batteries

Qian Liu, Xincheng Liang · 2025

Energy Storage Materials

Boosting the Sodium Storage Performance of O3-Type Layered Oxide Cathode by Dual-Site Doping

Shuo Shi, Qian Yang · 2025

Nano Letters

Promoting Layered Oxide Cathodes Based on Structural Reconstruction for Sodium‐Ion Batteries: Reversible Phase Transition, Stable Interface Regulation, and Multifunctional Intergrowth Structure

Xin‐Yu Liu, Shi Li · 2024

Advanced Functional Materials

Metrics

106

Citations

58

References

Details

Published: Nov 01, 2023
Vol/Issue: 475
Pages: 146090
License: View

Authors

S

Sheng Feng

Department of Chemistry Stanford University Stanford CA 94305 USA

Shihezi Medical College, Shihezi University, Xinjiang, China; Department of Pathology, University of Alabama at Birmingham, Birmingham, Alabama, USA

Cite This Article

Sheng Feng, Chujun Zheng, Zhiyang Song, et al. (2023). Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries. Chemical Engineering Journal, 475, 146090. https://doi.org/10.1016/j.cej.2023.146090

Boosting fast ionic transport and stability of O3-NaNi1/3Fe1/3Mn1/3O2 cathode via Al/Cu synergistically modulating microstructure for high-rate sodium-ion batteries

You May Also Like