Thermal conductivity prediction of sintered reaction bonded silicon nitride ceramics using a machine learning approach based on process conditions

Yin "Mechanical and thermal properties of Si3N4 ceramics prepared by gelcasting using high-solid-loading slurries" Ceram. Int. (2023) 10.1016/j.ceramint.2023.10.084

[5]

Kitayama "Thermal conductivity of β-Si3N4: II, Effect of lattice oxygen" J. Am. Ceram. Soc. (2000) 10.1111/j.1151-2916.2000.tb01501.x

[6]

Zhou "A tough silicon nitride ceramic with high thermal conductivity" Adv. Mater. (2011) 10.1002/adma.201102462

[7]

Minh Chu "Analysis of thermal strain of metallized silicon nitride substrate under cyclic thermal loading by digital image correlation" Int. J. Appl. Ceram. (2023)

[8]

Miyazaki "Improved resistance to thermal fatigue of active metal brazing substrates for silicon carbide power modules using tough silicon nitrides with high thermal conductivity" Ceram. Int. (2018) 10.1016/j.ceramint.2018.02.072

[9]

T.M. Mitchell, Machine Learning, McGraw-Hill Science/Engineering/Math1997.

[10]

Schulz Deep learning, KI - Künstliche Intelligenz (2012) 10.1007/s13218-012-0198-z

[11]

Furushima "Fracture toughness evaluation of silicon nitride from microstructures via convolutional neural network" J. Am. Ceram. Soc. (2022) 10.1111/jace.18795

[12]

Furushima "Artificial intelligence‐based determination of fracture toughness and bending strength of silicon nitride ceramics" J. Am. Ceram. Soc. (2023) 10.1111/jace.19147

[13]

Jiao "Curie temperature prediction of BiFeO3-PbTiO3-BaTiO3 solid solution based on machine learning" J. Inorg. Mater. (2022) 10.15541/jim20220080

[14]

Qu "Ultra-high temperature ceramics melting temperature prediction via machine learning" Ceram. Int. (2019) 10.1016/j.ceramint.2019.06.076

[15]

Su "Machine-learning-enabled prediction of adiabatic temperature change in lead-free BaTiO3-based electrocaloric ceramics" ACS Appl. Mater. Interfaces (2021) 10.1021/acsami.1c15021

[16]

del Castillo "Machine learning identification of piezoelectric properties" Materials (2021) 10.3390/ma14092405

[17]

He "Accelerated discovery of high-performance piezocatalyst in BaTiO3-based ceramics via machine learning" Nano Energy (2022) 10.1016/j.nanoen.2022.107218

[18]

Priyanga "Prediction of nature of band gap of perovskite oxides (ABO3) using a machine learning approach" J. Materiomics (2022) 10.1016/j.jmat.2022.04.006

[19]

Qin "Machine learning approaches for permittivity prediction and rational design of microwave dielectric ceramics" J. Materiomics (2021) 10.1016/j.jmat.2021.02.012

[20]

Yuan "Machine learning combined with feature engineering to search for BaTiO3 based ceramics with large piezoelectric constant" J. Alloys Compd. (2022)

[21]

Predicting mechanical properties of ultrahigh temperature ceramics using machine learning

Taihao Han, Jie Huang, Gaurav Sant et al.

Journal of the American Ceramic Society 2022 10.1111/jace.18636

[22]

Hasani "Evolving application of machine learning in the synthesis of CHA/ZrO2 nanocomposite for the microhardness prediction" Mater. Lett. (2022) 10.1016/j.matlet.2022.133022

[23]

Wilkinson "Machine learning predictions of Knoop hardness in lithium disilicate glass-ceramics" J. Am. Ceram. Soc. (2023) 10.1111/jace.19016

[24]

Yang "Prediction of bending strength of Si3N4 using machine learning" Ceram. Int. (2021) 10.1016/j.ceramint.2021.05.100

[25]

Zhu "Prediction of microstructure and mechanical properties of atmospheric plasma-sprayed 8YSZ thermal barrier coatings using hybrid machine learning approaches" Coatings (2023)

[26]

Machine learning identified materials descriptors for ferroelectricity

Jingjin He, Junjie Li, Changxin Wang et al.

Acta Materialia 2021 10.1016/j.actamat.2021.116815

[27]

Cao "Prediction and optimization of surface roughness for laser-assisted machining SiC ceramics based on improved support vector regression" Micromachines (2022) 10.3390/mi13091448

[28]

Ramesh "Prediction of surface roughness using machine learning approach for abrasive waterjet milling of alumina ceramic" Int. J. Adv. Manuf. Technol. (2022) 10.1007/s00170-021-08052-9

[29]

Gong "Machine learning-enabled prediction of chemical durability of A2B2O7 pyrochlore and fluorite" Comput. Mater. Sci. (2021) 10.1016/j.commatsci.2021.110820

[30]

Hao "Exploration of the oxidation and ablation resistance of ultra-high-temperature ceramic coatings using machine learning" Ceram. Int. (2022) 10.1016/j.ceramint.2022.06.156

[31]

Raju Golla "Effect of particle size and oxygen content of Si on processing, microstructure and thermal conductivity of sintered reaction bonded Si3N4" J. Alloys Compd. (2014) 10.1016/j.jallcom.2014.01.131

[32]

Duan "Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties" J. Eur. Ceram. Soc. (2020) 10.1016/j.jeurceramsoc.2019.10.003

[33]

Guo "Rapid fabrication of Si3N4 ceramics by reaction-bonding and pressureless sintering" J. Eur. Ceram. Soc. (2016) 10.1016/j.jeurceramsoc.2016.06.007

[34]

Dai "Effects of impurity oxygen content in raw Si powder on thermal and mechanical properties of sintered reaction-bonded silicon nitrides" Int. J. Appl. Ceram. (2012) 10.1111/j.1744-7402.2011.02618.x

[35]

Dai "Effect of aluminum content on mechanical properties and thermal conductivities of sintered reaction-bonded silicon nitride" Int. J. Appl. Ceram. (2014) 10.1111/ijac.12035

[36]

Li "Enhanced thermal conductivity and flexural strength of sintered reaction‐bonded silicon nitride with addition of (Y0.96Eu0.04)2O3" Int. J. Appl. Ceram. (2022) 10.1111/ijac.14192

[37]

Li "Improved thermal conductivity of sintered reaction-bonded silicon nitride using a BN/graphite powder bed" J. Eur. Ceram. Soc. (2017) 10.1016/j.jeurceramsoc.2017.05.045

[38]

Hyeon-Myeong "Controlling the width of particle size distribution of Si powder and properties of sintered reaction-bonded silicon nitride (SRBSN) ceramics with high thermal conductivity" Ceram. Int. (2020) 10.1016/j.ceramint.2020.02.014

[39]

Zhou Xinwen Zhu "Development of sintered reaction-bonded Si3N4 materials with high thermal conductivity" J. Ceram. Soc. Jpn. (2004)

[40]

Zhou "Development of high-thermal-conductivity silicon nitride ceramics" J. Asian Ceram. Soc. (2018) 10.1016/j.jascer.2015.03.003

[41]

Zhou "Sintered reaction-bonded silicon nitride with high thermal conductivity and high strength" Int. J. Appl. Ceram. (2008) 10.1111/j.1744-7402.2008.02187.x

[42]

Zhu "Effect of sintering additive composition on the processing and thermal conductivity of sintered reaction-bonded Si3N4" J. Am. Ceram. Soc. (2004) 10.1111/j.1151-2916.2004.tb07747.x

[43]

Zhu "Effects of processing method and additive composition on microstructure and thermal conductivity of Si3N4 ceramics" J. Eur. Ceram. Soc. (2006) 10.1016/j.jeurceramsoc.2005.07.027

[44]

Zhu "Processing and thermal conductivity of sintered reaction-bonded silicon nitride. I: effect of Si powder characteristics" J. Am. Ceram. Soc. (2006) 10.1111/j.1551-2916.2006.01195.x

[45]

Zhu "Processing and thermal conductivity of sintered reaction-bonded silicon nitride: (II) Effects of magnesium compound and yttria additives" J. Am. Ceram. Soc. (2007) 10.1111/j.1551-2916.2006.01462.x

[46]

Nakashima "Effects of nitridation temperature on properties of sintered reaction‐bonded silicon nitride" Int. J. Appl. Ceram. (2022) 10.1111/ijac.14163

[47]

Nakashima "Effect of microstructures on dielectric breakdown strength of sintered reaction‐bonded silicon nitride ceramics" J. Am. Ceram. Soc. (2022) 10.1111/jace.18826

[48]

Breiman "Random forests" MLear (2001)

[49]

Samat "Meta-XGBoost for hyperspectral image classification using extended MSER-guided morphological profiles" Rem. Sens. (2020) 10.3390/rs12121973

[50]

Nakashima "Effects of nitrogen pressure on properties of sintered reaction‐bonded silicon nitride" Int. J. Appl. Ceram. (2023) 10.1111/ijac.14475

Showing 50 of 58 references

Cited By

15

Correlation analysis of granulation condition, granule properties and green density of alumina ceramics fabricated by spray freeze granulation drying

Ying Chung, Naoki Kondo · 2026

Advanced Powder Technology

DFT-verified database and machine learning framework for designing high entropy carbide with superior mechanical properties

Hyokyeong Kim, Jiho Kim · 2026

Materials Today Communications

Multilayer artificial intelligence for thermal-conductivity prediction of silicon nitride ceramics from powder processing conditions and predicted densities

Ryoichi Furushima, Yuki Nakashima · 2024

Ceramics International

Metrics

15

Citations

58

References

Details

Published: Mar 01, 2024
Vol/Issue: 50(5)
Pages: 8520-8526
License: View

Authors

National Institute of Advanced Industrial Science and Technology 2266‐98 Anagahora, Shimo‐Shidami, Moriyama‐ku Nagoya 463‐8560 Japan

Cite This Article

Ryoichi Furushima, Yuki Nakashima, You Zhou, et al. (2024). Thermal conductivity prediction of sintered reaction bonded silicon nitride ceramics using a machine learning approach based on process conditions. Ceramics International, 50(5), 8520-8526. https://doi.org/10.1016/j.ceramint.2023.12.231

Thermal conductivity prediction of sintered reaction bonded silicon nitride ceramics using a machine learning approach based on process conditions

You May Also Like