Understanding defect structures in nanoscale metal additive manufacturing via molecular dynamics

Gurmeet Singh; Anthony M. Waas; Veera Sundararaghavan

doi:10.1016/j.commatsci.2021.110807

journal article Dec 01, 2021

Understanding defect structures in nanoscale metal additive manufacturing via molecular dynamics

Gurmeet Singh

Anthony M. Waas Veera Sundararaghavan

Computational Materials Science Vol. 200 pp. 110807 · Elsevier BV

View at Publisher Save 10.1016/j.commatsci.2021.110807

Topics

No keywords indexed for this article. Browse by subject →

References

44

[1]

Murr "Metal fabrication by additive manufacturing using laser and electron beam melting technologies" J. Mater. Sci. Technol. (2012) 10.1016/s1005-0302(12)60016-4

[2]

Additive manufacturing of metals

Dirk Herzog, Vanessa Seyda, Eric Wycisk et al.

Acta Materialia 2016 10.1016/j.actamat.2016.07.019

[3]

Bandyopadhyay "Recent developments in metal additive manufacturing" Curr. Opin. Chem. Eng. (2020) 10.1016/j.coche.2020.03.001

[4]

Zhang "Additive manufacturing of functionally graded materials: A review" Mater. Sci. Eng. A (2019) 10.1016/j.msea.2019.138209

[5]

VanSickle "Microstructure effects on fatigue crack growth in additively manufactured Ti–6Al–4V" Mater. Sci. Eng. A (2020) 10.1016/j.msea.2020.139993

[6]

Steels in additive manufacturing: A review of their microstructure and properties

P. Bajaj, A. Hariharan, A. Kini et al.

Materials Science and Engineering: A 2020 10.1016/j.msea.2019.138633

[7]

Shamsaei "An overview of direct laser deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control" Addit. Manuf. (2015)

[8]

Bartlett "An overview of residual stresses in metal powder bed fusion" Addit. Manuf. (2019)

[9]

Wang "Experimental and numerical study of the LENS rapid fabrication process" Trans. ASME, J. Manuf. Sci. Eng. (2009) 10.1115/1.3173952

[10]

Wang "Residual stresses in LENS-deposited AISI 410 stainless steel plates" Mater. Sci. Eng. A (2008) 10.1016/j.msea.2008.05.044

[11]

Li "Solidification microstructure simulation of Ti-6Al-4V in metal additive manufacturing: A review" Addit. Manuf. (2020)

[12]

Thompson "An overview of direct laser deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics" Addit. Manuf. (2015)

[13]

Chen "Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes" Acta Mater. (2016) 10.1016/j.actamat.2016.05.011

[14]

Li "Numerical investigation of effects of nucleation mechanisms on grain structure in metal additive manufacturing" Comput. Mater. Sci. (2018) 10.1016/j.commatsci.2018.06.019

[15]

Zinovieva "Three-dimensional modeling of the microstructure evolution during metal additive manufacturing" Comput. Mater. Sci. (2018) 10.1016/j.commatsci.2017.09.018

[16]

Prabhakar "Computational modeling of residual stress formation during the electron beam melting process for Inconel 718" Addit. Manuf. (2015)

[17]

Sahoo "Phase-field simulation of microstructure evolution of Ti-6Al-4V in electron beam additive manufacturing process" Addit. Manuf. (2016)

[18]

Tan "Microstructure modelling for metallic additive manufacturing: A review" Virtual Phys. Prototyp. (2020) 10.1080/17452759.2019.1677345

[19]

Karavaev "Precise calculation of melting curves by molecular dynamics" Comput. Mater. Sci. (2016) 10.1016/j.commatsci.2016.08.014

[20]

Asadi "Two-phase solid-liquid coexistence of Ni, Cu, and Al by molecular dynamics simulations using the modified embedded-atom method" Acta Mater. (2015) 10.1016/j.actamat.2014.12.010

[21]

Sui "Molecular dynamics simulation of the solidification process of multicrystalline silicon from homogeneous nucleation to grain coarsening" CrystEngComm (2018) 10.1039/c8ce00767e

[22]

Evolution of solidification defects in deformation of nano-polycrystalline aluminum

Avik Mahata, Mohsen Asle Zaeem

Computational Materials Science 2019 10.1016/j.commatsci.2019.03.034

[23]

Shibuta "A molecular dynamics study of cooling rate during solidification of metal nanoparticles" Chem. Phys. Lett. (2011) 10.1016/j.cplett.2010.12.020

[24]

Zhang "The molecular dynamics study of vacancy formation during solidification of pure metals" Sci. Rep. (2017)

[25]

Kurian "Selective laser melting of aluminum nano-powder particles, a molecular dynamics study" Addit. Manuf. (2020)

[26]

Jiang "Atomic-level understanding of crystallization in the selective laser melting of Fe50Ni50 amorphous alloy" Addit. Manuf. (2020)

[27]

Hu "Towards an integrated experimental and computational framework for large-scale metal additive manufacturing" Mater. Sci. Eng. A (2019) 10.1016/j.msea.2019.138057

[28]

Sui "Investigation of layer thickness and surface roughness in rapid freeze prototyping" J. Manuf. Sci. Eng. (2003) 10.1115/1.1556401

[29]

Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 ∘C

A. v. Müller, G. Schlick, R. Neu et al.

Nuclear Materials and Energy 2019 10.1016/j.nme.2019.02.034

[30]

Fast Parallel Algorithms for Short-Range Molecular Dynamics

Steve Plimpton

Journal of Computational Physics 1995 10.1006/jcph.1995.1039

[31]

Molecular dynamics simulations at constant pressure and/or temperature

Hans C. Andersen

The Journal of Chemical Physics 1980 10.1063/1.439486

[32]

Thermostats for “Slow” Configurational Modes

Alex A. Samoletov, Carl P. Dettmann, Mark A. J. Chaplain

Journal of Statistical Physics 2007 10.1007/s10955-007-9365-2

[33]

Larsen "Robust structural identification via polyhedral template matching" Modelling Simulation Mater. Sci. Eng. (2016) 10.1088/0965-0393/24/5/055007

[34]

Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool

Alexander Stukowski

Modelling and Simulation in Materials Science and... 2009 10.1088/0965-0393/18/1/015012

[35]

Structure identification methods for atomistic simulations of crystalline materials

Alexander Stukowski

Modelling and Simulation in Materials Science and... 2012 10.1088/0965-0393/20/4/045021

[36]

Faken "Systematic analysis of local atomic structure combined with 3D computer graphics" Comput. Mater. Sci. (1994) 10.1016/0927-0256(94)90109-0

[37]

Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers

X. W. Zhou, R. A. Johnson, H. N. G. Wadley

Physical Review B 2004 10.1103/physrevb.69.144113

[38]

Koseki "Overview inclusion assisted microstructure control in C–Mn and low alloy steel welds" Mater. Sci. Technol. (2005) 10.1179/174328405x51703

[39]

Structure and energetics of ligand binding to proteins: Escherichia coli dihydrofolate reductase‐trimethoprim, a drug‐receptor system

Pnina Dauber‐Osguthorpe, Victoria A. Roberts, David J. Osguthorpe et al.

Proteins: Structure, Function, and Bioinformatics 1988 10.1002/prot.340040106

[40]

Sin’Ko "Ab initio calculations of elastic constants and thermodynamic properties of bcc, fcc, and hcp Al crystals under pressure" J. Phys.: Condens. Matter (2002)

[41]

De Jong "Charting the complete elastic properties of inorganic crystalline compounds" Sci. Data (2015)

[42]

Dandekar "Molecular dynamics based cohesive zone law for describing Al-SiC interface mechanics" Composites A (2011) 10.1016/j.compositesa.2010.12.005

[43]

Luo "Molecular-dynamics simulation of Al/SiC interface structures" Phys. Rev. B (1999) 10.1103/physrevb.59.10125

[44]

Zhao "An inverse adhesion problem for extracting interfacial pair potentials for the Al(0 0 1)/3C-SiC(0 0 1) interface" Inverse Problems (2008) 10.1088/0266-5611/24/3/035019

Metrics

35

Citations

44

References

Details

Published: Dec 01, 2021
Vol/Issue: 200
Pages: 110807
License: View

Authors

Veera Sundararaghavan

Funding

University of Michigan

Cite This Article

Gurmeet Singh, Anthony M. Waas, Veera Sundararaghavan (2021). Understanding defect structures in nanoscale metal additive manufacturing via molecular dynamics. Computational Materials Science, 200, 110807. https://doi.org/10.1016/j.commatsci.2021.110807

Understanding defect structures in nanoscale metal additive manufacturing via molecular dynamics

You May Also Like