The importance of bonding in intralayer carbon fibre/self-reinforced polypropylene hybrid composites

Yentl Swolfs; Jia Shi; Yannick Meerten; Peter Hine; Ian Ward; Ignaas Verpoest; Larissa Gorbatikh

doi:10.1016/j.compositesa.2015.06.017

journal article Sep 01, 2015

The importance of bonding in intralayer carbon fibre/self-reinforced polypropylene hybrid composites

Yentl Swolfs

Jia Shi

Yannick Meerten Peter Hine Ian Ward Ignaas Verpoest Larissa Gorbatikh

Composites Part A: Applied Science and Manufacturing Vol. 76 pp. 299-308 · Elsevier BV

View at Publisher Save 10.1016/j.compositesa.2015.06.017

Topics

No keywords indexed for this article. Browse by subject →

References

38

[1]

Ward "The science and technology of hot compaction" Polymer (2004) 10.1016/j.polymer.2003.11.050

[2]

The influence of process parameters on the properties of hot compacted self-reinforced polypropylene composites

Y. Swolfs, Q. Zhang, J. Baets et al.

Composites Part A: Applied Science and Manufacturi... 2014 10.1016/j.compositesa.2014.05.022

[3]

Swolfs "Failure behaviour of self-reinforced polypropylene at and below room temperature" Compos A: Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.06.003

[4]

Swolfs "The influence of weave architecture on the mechanical properties of self-reinforced polypropylene" Compos A Appl Sci Manuf (2013) 10.1016/j.compositesa.2013.06.015

[5]

Alcock "Technology and development of self-reinforced polymer composites" (2013)

[6]

Alcock "The mechanical properties of woven tape all-polypropylene composites" Compos A Appl Sci Manuf (2007) 10.1016/j.compositesa.2006.01.003

[7]

Callens "Ductile steel fibre composites with brittle and ductile matrices" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.02.006

[8]

Callens "Tensile behaviour of steel fibre/epoxy composites with modified adhesion" Compos A Appl Sci Manuf (2015) 10.1016/j.compositesa.2014.11.022

[9]

Defoirdt "Assessment of the tensile properties of coir, bamboo and jute fibre" Compos A Appl Sci Manuf (2010) 10.1016/j.compositesa.2010.01.005

[10]

Swolfs "Fibre hybridisation in polymer composites: a review" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.08.027

[11]

Kretsis "A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics" Composites (1987) 10.1016/0010-4361(87)90003-6

[12]

Verpoest "Advanced materials enabling high-volume road transport applications of lightweight structural composite parts" Sampe J (2014)

[13]

Taketa "Interply hybrid composites with carbon fiber reinforced polypropylene and self-reinforced polypropylene" Compos A Appl Sci Manuf (2010) 10.1016/j.compositesa.2010.02.003

[14]

Fiore "Mechanical behavior of carbon/flax hybrid composites for structural applications" J Compos Mater (2012) 10.1177/0021998311429884

[15]

Sarasini "Effect of basalt fibre hybridization on the impact behaviour under low impact velocity of glass/basalt woven fabric/epoxy resin composites" Compos A Appl Sci Manuf (2013) 10.1016/j.compositesa.2012.11.021

[16]

Jalalvand "Damage analysis of pseudo-ductile thin-ply UD hybrid composites – a new analytical method" Compos A: Appl Sci Manuf (2015) 10.1016/j.compositesa.2014.11.006

[17]

Tensile behaviour of intralayer hybrid composites of carbon fibre and self-reinforced polypropylene

Yentl Swolfs, Liesbet Crauwels, Eline Van Breda et al.

Composites Part A: Applied Science and Manufacturi... 2014 10.1016/j.compositesa.2014.01.001

[18]

Hine "Hybrid carbon fibre/nylon 12 single polymer composites" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.05.020

[19]

Swolfs "The effect of fibre dispersion on initial failure strain and cluster development in unidirectional carbon/glass hybrid composites" Compos A Appl Sci Manuf (2015) 10.1016/j.compositesa.2014.12.001

[20]

Yu "Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres" Compos A Appl Sci Manuf (2015) 10.1016/j.compositesa.2015.02.014

[21]

Swolfs "Stress concentrations in hybrid unidirectional fibre-reinforced composites with random fibre packings" Compos Sci Technol (2013) 10.1016/j.compscitech.2013.05.013

[22]

Pegoretti "Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties" Polym Int (2004) 10.1002/pi.1514

[23]

Park "The effects of hybridization on the mechanical performance of aramid/polyethylene intraply fabric composites" Compos Sci Technol (1998) 10.1016/s0266-3538(97)00228-5

[24]

Swolfs "Introducing ductility in hybrid carbon fibre/self-reinforced composites through control of the damage mechanisms" Compos Struct (2015) 10.1016/j.compstruct.2015.04.069

[25]

Bunsell "Hybrid carbon and glass fibre composites" Composites (1974) 10.1016/0010-4361(74)90107-4

[26]

Czél "Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg" Compos A Appl Sci Manuf (2013) 10.1016/j.compositesa.2013.04.006

[27]

Jalalvand "Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates" Compos Sci Technol (2014) 10.1016/j.compscitech.2014.01.013

[28]

Hine "The use of interleaved films for optimising the production and properties of hot compacted, self reinforced polymer composites" Compos Sci Technol (2008) 10.1016/j.compscitech.2007.11.003

[29]

Hine "The use of an interleaved film for optimising the properties of hot compacted polyethylene single polymer composites" Polymer (2011) 10.1016/j.polymer.2011.04.026

[30]

Meerten "Penetration impact testing of self-reinforced composites" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.10.012

[31]

Verpoest "Virtual textile composites software WiseTex: integration with micro-mechanical, permeability and structural analysis" Compos Sci Technol (2005) 10.1016/j.compscitech.2005.05.031

[32]

Hine "The hot compaction of 2-dimensional woven melt spun high modulus polyethylene fibres" J Mater Sci (2000) 10.1023/a:1004835816735

[33]

Chamis CC. Simplified Composite Micromechanics Equations for Hygral, Thermal and Mechanical Properties. NASA Technical Memorandum 88320. Houston, United States: NASA; 1983.

[34]

Searles "Micro- and mesomechanics of 8-harness satin woven fabric composites: I – evaluation of elastic behavior" Compos A – Appl Sci Manuf (2001) 10.1016/s1359-835x(00)00181-0

[35]

Shindo "Polyacrylonitrile (PAN)-based carbon fibers" (2000)

[36]

Ward (2012)

[37]

Karsli "Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber reinforced polypropylene composites" Mater Des (2011) 10.1016/j.matdes.2011.03.021

[38]

Ghaseminejhad "Impact behaviour and damage tolerance of woven carbon fibre-reinforced thermoplastic composites" Composites (1990) 10.1016/0010-4361(90)90008-k

Cited By

47

High performance ductile and pseudo-ductile polymer matrix composites: A review

M.R. Wisnom, S. Pimenta · 2024

Composites Part A: Applied Science...

Self‐reinforced polymer composites: An opportunity to recycle plastic wastes and their future trends

NB Karthik Babu, Rhoda Afriyie Mensah · 2022

Journal of Applied Polymer Science

Flexural behaviour of corrugated panels of self-reinforced polypropylene hybridised with carbon fibre: An experimental and modelling study

Francisco Mesquita, Anke van Gysel · 2018

Composites Part B: Engineering

Metrics

47

Citations

38

References

Details

Published: Sep 01, 2015
Vol/Issue: 76
Pages: 299-308
License: View

Authors

Department of Materials Engineering, KU Leuven, Belgium

L

Larissa Gorbatikh

Department of Materials Engineering, KU Leuven, Belgium; SIM M3 Program, Belgium

Funding

European Union Seventh Framework Programme Award: 246389

Agency for Innovation by Science and Technology in Flanders (IWT)

Cite This Article

Yentl Swolfs, Jia Shi, Yannick Meerten, et al. (2015). The importance of bonding in intralayer carbon fibre/self-reinforced polypropylene hybrid composites. Composites Part A: Applied Science and Manufacturing, 76, 299-308. https://doi.org/10.1016/j.compositesa.2015.06.017

The importance of bonding in intralayer carbon fibre/self-reinforced polypropylene hybrid composites

You May Also Like