Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

Shao-Yun Fu; Xi-Qiao Feng; Bernd Lauke; Yiu-Wing Mai

doi:10.1016/j.compositesb.2008.01.002

journal article Sep 01, 2008

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

Shao-Yun Fu Xi-Qiao Feng

Bernd Lauke Yiu-Wing Mai

Composites Part B: Engineering Vol. 39 No. 6 pp. 933-961 · Elsevier BV

View at Publisher Save 10.1016/j.compositesb.2008.01.002

Topics

No keywords indexed for this article. Browse by subject →

References

229

[1]

Polymer/layered silicate nanocomposites: a review from preparation to processing

Suprakas Sinha Ray, Masami Okamoto

Progress in Polymer Science 2003 10.1016/j.progpolymsci.2003.08.002

[2]

Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials

Michaël Alexandre, Philippe Dubois

Materials Science and Engineering: R: Reports 2000 10.1016/s0927-796x(00)00012-7

[3]

Kim "Synthesis and material properties of syndiotactic polystyrene/organophilic clay nanocomposites" J Appl Polym Sci (2004) 10.1002/app.20186

[4]

Liu "Studies on nylon 6/clay nanocomposites by melt-intercalation process" J Appl Polym Sci (1999) 10.1002/(sici)1097-4628(19990214)71:7<1133::aid-app11>3.0.co;2-n

[5]

Usuki "Synthesis of nylon-6–clay hybrid" J Mater Res (1993) 10.1557/jmr.1993.1179

[6]

Giannelis "Polymer layered silicate nanocomposites" Adv Mater (1996) 10.1002/adma.19960080104

[7]

Kojima "One-pot synthesis of nylon-6 clay hybrid" J Polym Sci Part A Polym Chem (1993) 10.1002/pola.1993.080310714

[8]

Tyan "Thermally and mechanically enhanced clay/polyimide nanocomposite via reactive organoclay" Chem Mater (1999) 10.1021/cm990187x

[9]

Shi "Interfacial effects on the reinforcement properties of polymer–organoclay nanocomposites" Chem Mater (1996) 10.1021/cm960227m

[10]

Cho "Nylon 6 nanocomposites by melt compounding" Polymer (2001) 10.1016/s0032-3861(00)00380-3

[11]

Wang "Hybrid organic–inorganic nanocomposites formed from an epoxy polymer and a layered silicic acid (magadiite)" Chem Mater (1996) 10.1021/cm960263l

[12]

Zhang "Studies on characterization and cryogenic mechanical properties of polyimide-layered silicate nanocomposite films" Polymer (2004) 10.1016/j.polymer.2004.08.032

[13]

Tjong "Structural and mechanical properties of polymer nanocomposites" Mater Sci Eng R (2006) 10.1016/j.mser.2006.06.001

[14]

Lau "A critical review on nanotube and nanotube/nanoclay related polymer composite materials" Composites Part B (2006) 10.1016/j.compositesb.2006.02.020

[15]

Dispersion and alignment of carbon nanotubes in polymer matrix: A review

X XIE, Y MAI, X Zhou

Materials Science and Engineering: R: Reports 2005 10.1016/j.mser.2005.04.002

[16]

Zhu "Preparation and properties of organosoluble polyimide/silica hybrid materials by sol–gel process" J Appl Polym Sci (1999) 10.1002/(sici)1097-4628(19990929)73:14<2977::aid-app22>3.0.co;2-j

[17]

Dekkers "The effect of interfacial adhesion on the tensile behavior of polystyrene–glass-bead composites" J Appl Polym Sci (1983) 10.1002/app.1983.070281220

[18]

Fu "Characterization of tensile behaviour of hybrid short glass fibre calcite particle ABS composites" Composite Part A (1998) 10.1016/s1359-835x(97)00117-6

[19]

Fu "Analysis of mechanical properties of injection molded short glass fibre (SGF)/calcite/ABS composites" J Mater Sci Technol (1997)

[20]

Eirich "Some mechanical and molecular aspects of the performance of composites" J Appl Polym Sci Appl Polym Symp (1984)

[21]

Radford "The mechanical properties of an epoxy resin with a second phase dispersion" J Mater Sci (1971) 10.1007/bf00552042

[22]

Spanoudakis "Crack propagation in a glass particle-filled epoxy–resin. 1. Effect of particle-volume fraction and size" J Mater Sci (1984) 10.1007/bf02403234

[23]

Amdouni "Epoxy composites based on glass-beats. 2. Mechanical-properties" J Appl Polym Sci (1992) 10.1002/app.1992.070461004

[24]

Wang "Young’s and shear moduli of ceramic particle filled polyethylene" J Mater Sci Mater Med (1998) 10.1023/a:1008975323486

[25]

Hsueh "Effects of aspect ratios of ellipsoidal inclusions on elastic stress transfer of ceramic composites" J Am Ceram Soc (1987) 10.1111/j.1151-2916.1989.tb06132.x

[26]

Young "Effect of composition upon fracture of silica particle-filled epoxy–resin composites" J Mater Sci (1977) 10.1007/bf00548158

[27]

Pukanszky "Mechanism of interfacial interactions in particulate filled composites" Compos Interf (1993) 10.1163/156855493x00266

[28]

Nakamura "Effects of particle size on mechanical and impact properties of epoxy resin filled with spherical silica" J Appl Polym Sci (1992) 10.1002/app.1992.070450716

[29]

Reynaud "Nanofillers in polymeric matrix: a study on silica reinforced PA6" Polymer (2001) 10.1016/s0032-3861(01)00446-3

[30]

Ou "A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization" J Polym Sci Part B Polym Phys (1998) 10.1002/(sici)1099-0488(19980415)36:5<789::aid-polb6>3.0.co;2-g

[31]

Liang "Tensile fracture behaviour and morphological analysis of glass bead filled low density polyethylene composites" Plast Rubber Compos Process Appl (1997)

[32]

Chacko "Dynamic mechanical spectrometry of nylon-12" J Appl Polym Sci (1983) 10.1002/app.1983.070280903

[33]

Tjong "Ternary polymer composites: PA6,6/maleated SEBS/glass beads" J Appl Polym Sci (2001) 10.1002/app.1777

[34]

Danusso "Strength versus composition of rigid matrix particulate composites" Polymer (1986) 10.1016/0032-3861(86)90038-8

[35]

Levita "Fracture of ultrafine calcium carbonate/polypropylene composites" Polym Compos (1989) 10.1002/pc.750100106

[36]

Nicolais "Stress–strain behavior of styrene–acrylonitrile/glass bead composites in the glassy region" Polym Eng Sci (1971) 10.1002/pen.760110305

[37]

Nicolais "Effect of particles shape on tensile properties of glassy thermoplastic composites" Int J Polym Mater (1974) 10.1080/00914037408072354

[38]

Moloney "Review – parameters determining the strength and toughness of particulate filled epoxide resins" J Mater Sci (1987) 10.1007/bf01160743

[39]

Kinloch (1983)

[40]

Shimbo "Internal stress of cured epoxide resin coatings having different network chains" J Coat Technol (1984)

[41]

Shimbo "Shrinkage and internal stress during curing of epoxide resins" J Appl Polym Sci (1981) 10.1002/app.1981.070260714

[42]

Spanoudakis "Crack propagation in a glass particle-filled composite at or near a rigid spherical inclusion" J Mater Sci (1984) 10.1007/bf02403235

[43]

Lange "The interaction of a crack front with a second phase dispersion" Philos Mag (1970) 10.1080/14786437008221068

[44]

Nielsen (1994)

[45]

Rothon (1995)

[46]

Kendall "Fracture of particulate filled polymers" Brit Polym J (1978) 10.1002/pi.4980100107

[47]

Jancar "Failure mechanics in ternary composites of polypropylene with inorganic fillers and elastomer inclusions" J Mater Sci (1995) 10.1007/bf01184598

[48]

Fu "Fracture resistance of unfilled and calcite particle-filled ABS composites reinforced by short glass fibers (SGF) under impact load" Composite Part A (1998) 10.1016/s1359-835x(97)00111-5

[49]

Pukanszky "Composites" (1995)

[50]

Baker "Calcium carbonate" (1987)

Showing 50 of 229 references

Cited By

3,088

Effect of MMT clay and MWCNT on the tensile properties of PVA nanocomposites

Seyed Mojtaba Zebarjad, Fatemeh Bagheri · 2026

Materials Chemistry and Physics

Achieving over 100% strength recovery in marine concrete: A dual-layer capsule strategy utilizing coal-based solid waste

Lijuan Su, Lizhou Shen · 2026

Construction and Building Materials

Development of structural flax fiber/hollow glass microspheres reinforced polyurethane bio-composites through one-shot, one-step method: Mechanical, thermal, and morphological evaluation

Dehenenet Flatie Tassaw, Marcin Barburski · 2026

Journal of Building Engineering

Biorefining of rice husks into sustainable nanoparticles for reinforced polyvinyl alcohol composites

Mohamed Shaik, Mansi Goyal · 2026

Materials Today Sustainability

Epoxy composites reinforced with nanomaterials and fibres: Manufacturing, properties, and applications

Pooya Parvizi, Milad Jalilian · 2025

Polymer Testing

Precise fiber alignment in stereolithography (SLA) 3D printing of composite polymers

Kunal Manoj Gide, Clara Elise Tranchemontagne · 2025

Hybrid Advances

Acrylonitrile-styrene–acrylate@ silicone three layers core-shell nanostructure copolymer with excellent impact toughness and highness-strength balance

Jin Huang, Jiajun Ma · 2025

Reactive and Functional Polymers

Modeling Carbon-Based Nanomaterials (CNMs) and Derived Composites and Devices

Agustίn Chiminelli, Ivan Radović · 2024

Sensors

Strain-invariant stretchable radio-frequency electronics

Sun Hong Kim, Abdul Basir · 2024

Nature

Eco-friendly sugarcane biochar filler for enhanced mechanical properties in S-glass/polyester hybrid composites

Sundarakannan Rajendran, Geetha Palani · 2024

Cleaner Engineering and Technology

Unveiling the Influential Factors and Heavy Industrial Applications of Graphene Hybrid Polymer Composites

Zulfiqar Ali, Saba Yaqoob · 2024

Journal of Composites Science

Natural coal-derived graphite as rubber filler and the influence of its progressive graphitization on reinforcement performance

Qinfu Liu, Leibo Ji · 2024

Composites Part A: Applied Science...

Spraying EPDM@NPs as an efficient strategy for polyethylene-based high-voltage insulation

Fan-Bo Meng, Xiangrong Chen · 2023

Chemical Engineering Journal

The mechanisms of enhanced thickness‐dependent DC breakdown strength of EP/MWCNTs nanocomposites

Zhen Li, Huijun Gao · 2023

High Voltage

Unsaturated Polyester Resin Filled with Cementitious Materials: A Comprehensive Study of Filler Loading Impact on Mechanical Properties, Microstructure, and Water Absorption

Salah M. S. Al-Mufti, Asma Almontasser · 2023

ACS Omega

Enhancing the mechanical performance of E‐glass fiber epoxy composites using coal‐derived graphene oxide

Anushka Garg, Soumen Basu · 2023

Polymer Composites

Design of interface dynamic cross-linked hybrid network with highly improved mechanical, recycling and adhesive performance

Wei Liu, Zhou Gong · 2023

Chemical Engineering Journal

Correlation between compression strength and failure mechanism of carbon fiber composite with tailored modulus of amide acid/SiO2 synergistically stiffened epoxy matrix

Kangyi Lu, Wenmo Zhu · 2021

Composites Science and Technology

Incorporation of Biochar to Improve Mechanical, Thermal and Electrical Properties of Polymer Composites

Chinmoyee Das, Sandeep Tamrakar · 2021

Polymers

Surface modified boron nitride towards enhanced thermal and mechanical performance of thermoplastic polyurethane composite

Akbar Bashir, Muhammad Maqbool · 2021

Composites Part B: Engineering

Metrics

3,088

Citations

229

References

Details

Published: Sep 01, 2008
Vol/Issue: 39(6)
Pages: 933-961
License: View

Authors

Cite This Article

Shao-Yun Fu, Xi-Qiao Feng, Bernd Lauke, et al. (2008). Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Composites Part B: Engineering, 39(6), 933-961. https://doi.org/10.1016/j.compositesb.2008.01.002

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

You May Also Like