Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates

J.L. Mantari; C. Guedes Soares

doi:10.1016/j.compstruct.2013.04.042

journal article Nov 01, 2013

Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates

J.L. Mantari C. Guedes Soares

Composite Structures Vol. 105 pp. 319-331 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2013.04.042

Topics

No keywords indexed for this article. Browse by subject →

References

98

[1]

Allen (1969)

[2]

Mouritz "Review of advanced composite structures for naval ships and submarines" Compos Struct (2001) 10.1016/s0263-8223(00)00175-6

[3]

Demasi "∞6 Mixed plate theories based on the generalized unified formulation. Part I: Governing equations" Compos Struct (2009) 10.1016/j.compstruct.2008.07.013

[4]

Demasi "∞6 Mixed plate theories based on the generalized unified formulation. Part II: Layerwise theories" Compos Struct (2009) 10.1016/j.compstruct.2008.07.012

[5]

Carrera "An assessment of mixed and classical theories on global and local response of multilayered orthotropic plates" Compos Struct (2000) 10.1016/s0263-8223(00)00099-4

[6]

Carrera "Developments, ideas, and evaluations based upon Reissner’s mixed variational theorem in the modeling of multilayered plates and shells" Appl Mech Rev (2001) 10.1115/1.1385512

[7]

Carrera "Theories and finite elements for multilayered, anisotropic, composite plates and shells" Arch Comput Methods Eng (2002) 10.1007/bf02736649

[8]

Demasi "Treatment of stress variables in advanced multilayered plate elements based upon Reissners’s mixed variational theorem" Compos Struct (2006) 10.1016/j.compstruc.2006.01.036

[9]

Demasi "∞6 Mixed plate theories based on the generalized unified formulation. Part III: Advanced mixed high order shear deformation theories" Compos Struct (2009) 10.1016/j.compstruct.2008.07.011

[10]

Demasi "∞6 Mixed plate theories based on the generalized unified formulation. Part IV: Zig-zag theories" Compos Struct (2009) 10.1016/j.compstruct.2008.07.010

[11]

Demasi "∞6 Mixed plate theories based on the generalized unified formulation. Part V: Results" Compos Struct (2009) 10.1016/j.compstruct.2008.07.009

[12]

Carrera "Theories and finite elements for multilayered plates and shells: a unified compact formulation with numerical assessment and benchmarks" Arch Comput Methods Eng (2003) 10.1007/bf02736224

[13]

Demasi "∞3 Hierarchy plate theories for thick and thin composite plates: the generalized unified formulation" Compos Struct (2008) 10.1016/j.compstruct.2007.08.004

[14]

Reissner "Bending and stretching of certain types of heterogeneous aelotropic elastic plates" J Appl Mech (1961) 10.1115/1.3641719

[15]

Whitney "Analysis of simply supported laminated anisotropic plates" AIAA J (1970) 10.2514/3.5601

[16]

Ashton "Anisotropic plate analysis-boundary conditions" J Compos Mater (1970) 10.1177/002199837000400201

[17]

Whitney "Bending-extension coupling in laminated plates under transverse loading" J Compos Mater (1969) 10.1177/002199836900300102

[18]

Reissner "On the equations of linear shallow shell theory" Stud Math (1969) 10.1002/sapm1969482133

[19]

Whitney "The effect of boundary conditions on the response of laminated composites" J Compos Mater (1970) 10.1177/002199837000400205

[20]

Mindlin "Influence of rotatory inertia and shear on flexural motions of isotropic elastic plates" J Appl Mech (1951) 10.1115/1.4010217

[21]

Dong "On a laminated orthotropic shell theory including transverse shear deformation" J Appl Mech (1972) 10.1115/1.3422834

[22]

Chou "Transverse shear in laminated plate theories" AIAA J (1973) 10.2514/3.6917

[23]

A Consistent Treatment of Transverse Shear Deformations in Laminated Anisotropic Plates

E. Reissner

AIAA Journal 1972 10.2514/3.50194

[24]

Reddy "Exact solutions of moderately thick laminated shells" J Eng Mech (1984) 10.1061/(asce)0733-9399(1984)110:5(794)

[25]

Reddy "Levy type solutions for symmetrically laminated rectangular plates using first order shear deformation theories" J Appl Mech (1987) 10.1115/1.3173104

[26]

Reissner "On transverse bending of plates, including the effect of transverse shear deformation" Int J Solids Struct (1975) 10.1016/0020-7683(75)90030-x

[27]

Lo "A higher-order theory of plate deformation. Part 2: Laminated plates" J Appl Mech (1977) 10.1115/1.3424155

[28]

Murthy MV. An improved transverse shear deformation theory for laminated anisotropic plates. NASA Technical Paper 1903; 1981.

[29]

Reddy "A simple higher-order theory for laminated composite plates" J Appl Mech (1984) 10.1115/1.3167719

[30]

Reddy "A refined nonlinear theory of plates with transverse shear deformation" Int J Solids Struct (1984) 10.1016/0020-7683(84)90056-8

[31]

Reddy "A higher-order shear deformation theory of laminated elastic shells" Int J Eng Sci (1985) 10.1016/0020-7225(85)90051-5

[32]

Reddy JN. A refined shear deformation theory for the analysis of laminated plates. NASA Report 3955; 1986.

[33]

Librescu "Analysis of symmetric cross-ply laminated elastic plates using a higher-order theory. Part I: Stress and displacement" Compos Struct (1988) 10.1016/0263-8223(88)90014-1

[34]

Librescu "A comprehensive analysis of state of stress of elastic anisotropic flat plates using refined theories" Acta Mech (1987) 10.1007/bf01174647

[35]

Bert "A critical evaluation of new plate theories applied to laminated composites" Compos Struct (1984) 10.1016/0263-8223(84)90004-7

[36]

Murakami "Laminated composite plate theory with improved in-plane responses" J Appl Mech (1986) 10.1115/1.3171828

[37]

Mallikarjuna "A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches" Compos Struct (1993) 10.1016/0263-8223(93)90230-n

[38]

Kant "Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory" Compos Struct (2002) 10.1016/s0263-8223(02)00017-x

[39]

Swaminathan "Analytical solutions using a higher-order refined theory for the static analysis of antisymmetric angle-ply composite and sandwich plates" Compos Struct (2004) 10.1016/j.compstruct.2003.09.042

[40]

Khare "Closed-form thermo-mechanical solutions of higher-order theories of cross-ply laminated shallow shells" Compos Struct (2003) 10.1016/s0263-8223(02)00245-3

[41]

Batra "Higher-order piezoelectric plate theory derived from a three-dimensional variational principle" AIAA J (2002) 10.2514/2.1618

[42]

Ferreira "Analysis of composite plates by trigonometric shear deformation theory and multiquadrics" Comput Struct (2005) 10.1016/j.compstruc.2005.04.002

[43]

Kim "Enhanced first-order theory based on mixed formulation and transverse normal effect" Int J Solids Struct (2007) 10.1016/j.ijsolstr.2006.06.018

[44]

Bhaskar "Untruncated infinite series superposition method for accurate flexural analysis of isotropic/orthotropic rectangular plates with arbitrary edge conditions" Compos Struct (2008) 10.1016/j.compstruct.2007.04.001

[45]

Oktem "Levy type Fourier analysis of thick cross-ply doubly-curved panels" Compos Struct (2007) 10.1016/j.compstruct.2006.05.020

[46]

Oktem "Higher-order theory based boundary-discontinuous Fourier analysis of simply supported thick cross-ply doubly curved panels" Compos Struct (2009) 10.1016/j.compstruct.2008.09.007

[47]

Oktem "Sensitivity of the response of thick doubly curved cross-ply panels to edge clamping" Compos Struct (2009) 10.1016/j.compstruct.2008.01.014

[48]

Oktem "Boundary discontinuous Fourier solution for plates and doubly curved panels using a higher order theory" Composites: Part B (2011) 10.1016/j.compositesb.2011.01.014

[49]

Shimpi "A layerwise trigonometric shear deformation theory for two layered cross-ply laminated beams" J Reinf Plast Compos (1999) 10.1177/073168449901801605

[50]

Shimpi "A new layerwise trigonometric shear deformation theory for two-layered cross-ply beams" Compos Sci Technol (2001) 10.1016/s0266-3538(01)00024-0

Showing 50 of 98 references

Metrics

53

Citations

98

References

Details

Published: Nov 01, 2013
Vol/Issue: 105
Pages: 319-331

Authors

Cite This Article

J.L. Mantari, C. Guedes Soares (2013). Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates. Composite Structures, 105, 319-331. https://doi.org/10.1016/j.compstruct.2013.04.042

Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates

You May Also Like