Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining

Francesco Lambiase; Alfonso Paoletti

doi:10.1016/j.compstruct.2018.01.045

journal article Apr 01, 2018

Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining

Francesco Lambiase Alfonso Paoletti

Composite Structures Vol. 189 pp. 70-78 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2018.01.045

Topics

No keywords indexed for this article. Browse by subject →

References

40

[1]

Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding

Jin-Hwe Kweon, Jae-Woo Jung, Tae-Hwan Kim et al.

Composite Structures 2006 10.1016/j.compstruct.2006.04.013

[2]

Mandolfino "Effect of laser and plasma surface cleaning on mechanical properties of adhesive bonded joints" Proc. CIRP (2015) 10.1016/j.procir.2015.06.054

[3]

Lambiase "Mechanical behavior of punched holes produced on thin glass fiber reinforced plastic laminates" Compos Struct (2017) 10.1016/j.compstruct.2017.04.003

[4]

Lambiase "Mechanical behaviour of polymer-metal hybrid joints produced by clinching using different tools" Mater Des (2015) 10.1016/j.matdes.2015.08.037

[5]

Gerstmann "Recent developments in flat-clinching" Comput Mater Sci (2014) 10.1016/j.commatsci.2013.07.013

[6]

Di Franco "Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks" Int J Adhes Adhes (2013) 10.1016/j.ijadhadh.2012.10.008

[7]

Lambiase "Two-steps clinching of aluminum and Carbon Fiber Reinforced Polymer sheets" Compos Struct (2017) 10.1016/j.compstruct.2016.12.072

[8]

Lambiase "Feasibility of mechanical clinching for joining aluminum AA6082-T6 and Carbon Fiber Reinforced Polymer sheets" Mater Des (2016) 10.1016/j.matdes.2016.06.061

[9]

Lambiase "Fast joining of aluminum sheets with Glass Fiber Reinforced Polymer (GFRP) by mechanical clinching" J Mater Process Technol (2016) 10.1016/j.jmatprotec.2016.04.030

[10]

Katayama "Laser direct joining of metal and plastic" Scr Mater (2008) 10.1016/j.scriptamat.2008.08.026

[11]

Okada "Direct joining of aluminum alloy and plastic sheets by friction lap processing" Mater Sci Forum (2014) 10.4028/www.scientific.net/msf.794-796.395

[12]

Nagatsuka "Direct joining of carbon-fiber–reinforced plastic to an aluminum alloy using friction lap joining" Compos B Eng (2015) 10.1016/j.compositesb.2014.12.029

[13]

Zhang "Improvement of the laser joining of CFRP and aluminum via laser pre-treatment" Int J Adv Manuf Technol (2016)

[14]

Roesner "Laser assisted joining of plastic metal hybrids" Phys Proc (2011) 10.1016/j.phpro.2011.03.146

[15]

Pardal "Laser spot welding of laser textured steel to aluminium" J Mater Process Technol (2017) 10.1016/j.jmatprotec.2016.10.025

[16]

Goushegir "Influence of process parameters on mechanical performance and bonding area of AA2024/carbon-fiber-reinforced poly(phenylene sulfide) friction spot single lap joints" Mater Des (2015) 10.1016/j.matdes.2015.06.044

[17]

Gonçalves "Friction spot welding of carbon fiber-reinforced polyamide 66 laminate" Mater Lett (2015) 10.1016/j.matlet.2015.08.036

[18]

Yusof "Effect of surface states on joining mechanisms and mechanical properties of aluminum alloy (A5052) and polyethylene terephthalate (PET) by dissimilar friction spot welding" Metals (2016) 10.3390/met6050101

[19]

Goushegir "Friction Spot Joining of aluminum AA2024/carbon-fiber reinforced poly(phenylene sulfide) composite single lap joints: microstructure and mechanical performance" Mater Des (2014) 10.1016/j.matdes.2013.08.034

[20]

Wang "Simulation and optimization of continuous laser transmission welding between PET and titanium through FEM, RSM, GA and experiments" Opt Lasers Eng (2013) 10.1016/j.optlaseng.2013.04.021

[21]

Liu "Modeling and prediction of transmission laser bonding process between titanium coated glass and PET based on response surface methodology" Opt Lasers Eng (2012) 10.1016/j.optlaseng.2011.10.010

[22]

Wang "Laser transmission joint between PET and titanium for biomedical application" J Mater Process Technol (2010) 10.1016/j.jmatprotec.2010.06.007

[23]

Chan "Fibre laser joining of highly dissimilar materials: commercially pure Ti and PET hybrid joint for medical device applications" Mater Des (2016) 10.1016/j.matdes.2016.04.086

[24]

Chen "A new laser joining technology for direct-bonding of metals and plastics" Mater Des (2016) 10.1016/j.matdes.2016.08.018

[25]

Evaluation of PMMA joining to stainless steel 304 using pulsed Nd:YAG laser

Furat I. Hussein, E. Akman, B. Genc Oztoprak et al.

Optics & Laser Technology 2013 10.1016/j.optlastec.2012.12.028

[26]

Hussein "Finite element thermal analysis for PMMA/st.st.304 laser direct joining" Opt Laser Technol (2017) 10.1016/j.optlastec.2016.07.017

[27]

Georgiev "Chemical bond formation during laser bonding of Teflon® FEP and titanium" Appl Surf Sci (2009) 10.1016/j.apsusc.2009.03.046

[28]

Yusof "Effect of anodizing on pulsed Nd:YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052)" Mater Des (2012) 10.1016/j.matdes.2012.01.006

[29]

Jung "Effect of surface pre-oxidation on laser assisted joining of acrylonitrile butadiene styrene (ABS) and zinc-coated steel" Mater Des (2016) 10.1016/j.matdes.2016.03.044

[30]

Lambiase "Laser-assisted direct joining of AISI304 stainless steel with polycarbonate sheets: thermal analysis, mechanical characterization, and bonds morphology" Opt Laser Technol (2017) 10.1016/j.optlastec.2016.09.028

[31]

Liu "Performance and mechanism of laser transmission joining between glass fiber-reinforced PA66 and PC" J Appl Polym Sci (2016) 10.1002/app.43068

[32]

Xu "Effect of glass fiber and crystallinity on light transmission during laser transmission welding of thermoplastics" Opt Laser Technol (2015) 10.1016/j.optlastec.2014.12.025

[33]

Jung "Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel" Mater Des (2013) 10.1016/j.matdes.2012.12.015

[34]

Lambiase "Laser-assisted direct-joining of carbon fibre reinforced plastic with thermosetting matrix to polycarbonate sheets" Opt Laser Technol (2017) 10.1016/j.optlastec.2017.03.006

[35]

Esteves "Friction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strength" Mater Des (2015) 10.1016/j.matdes.2014.06.070

[36]

Junior "Feasibility study of friction spot welding of dissimilar single-lap joint between poly(methyl methacrylate) and poly(methyl methacrylate)-SiO2 nanocomposite" Mater Des (2014) 10.1016/j.matdes.2014.07.050

[37]

Amancio-Filho "On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures" Mater Sci Eng, A (2011) 10.1016/j.msea.2011.01.085

[38]

ASTM E 8M (2000)

[39]

ASTM D 638 (2000)

[40]

Lambiase "Improving energy efficiency in friction assisted joining of metals and polymers" J Mater Process Technol (2017) 10.1016/j.jmatprotec.2017.08.005

Cited By

88

Laser assisted joining of AA5053 aluminum alloy with polyvinyl chloride (PVC)

F. Lambiase, S. Genna · 2018

Optics & Laser Technology

Metrics

88

Citations

40

References

Details

Published: Apr 01, 2018
Vol/Issue: 189
Pages: 70-78
License: View

Authors

Cite This Article

Francesco Lambiase, Alfonso Paoletti (2018). Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining. Composite Structures, 189, 70-78. https://doi.org/10.1016/j.compstruct.2018.01.045

Mechanical behavior of AA5053/polyetheretherketone (PEEK) made by Friction Assisted Joining

You May Also Like