Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks

A.G. Stamopoulos; K.I. Tserpes; A.J. Dentsoras

doi:10.1016/j.compstruct.2018.02.096

journal article May 01, 2018

Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks

A.G. Stamopoulos K.I. Tserpes A.J. Dentsoras

Composite Structures Vol. 192 pp. 327-335 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2018.02.096

Topics

No keywords indexed for this article. Browse by subject →

References

39

[1]

Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites

S. Hernández, F. Sket, J.M. Molina-Aldareguı´a et al.

Composites Science and Technology 2011 10.1016/j.compscitech.2011.05.002

[2]

Koushyar (2009)

[3]

Campbell "Porosity in carbon fiber composites: an overview of causes" J Adv Mater (1995)

[4]

Grunenfelder "Void formation in composite prepregs-effect of dissolved moisture" Compos Sci Technol (2010) 10.1016/j.compscitech.2010.09.009

[5]

Kedari "Effects of vacuum pressure, inlet pressure, and mold temperature on the void content, volume fraction of polyester/e-glass fiber composites manufactured with VARTM process" J Compos Mater (2011) 10.1177/0021998311415442

[6]

Sisodia "Effects of voids on quasi-static and tension fatigue behaviour of carbon-fibre composite laminates" J Compos Mater (2014)

[7]

Almeida "Effects of void content on the strength of composite laminates" Compos Struct (1994) 10.1016/0263-8223(94)90044-2

[8]

Stamopoulos "Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing" J Compos Mater (2016) 10.1177/0021998315602049

[9]

Krumm M, Sauerwein C, Hämmerle V, Oster R. Capabilities and application of specialized Computed Tomography methods for the determination of characteristic material properties of fiber composite components. In International conference of thermoelectrics, Denmark; 2013.

[10]

Nikishkov "Measurement of voids in composites by X-ray Computed Tomography" Compos Sci Technol (2013) 10.1016/j.compscitech.2013.09.019

[11]

Prade "Nondestructive characterization of fiber orientation in short fiber reinforced polymer composites with X-ray vector radiography" NDT&E Int (2017) 10.1016/j.ndteint.2016.11.013

[12]

Drach "Numerical modeling of carbon/carbon composites with nanotextured matrix and 3D pores of irregular shapes" Int J Solids Struct (2011) 10.1016/j.ijsolstr.2011.04.021

[13]

Tsukrov I, Drach B, Piat R. Effective elastic parameters of carbon/carbon composites with non-ellipsoidal pores. In Proceedings of the 18th international conference of composite materials (ICCM18), 21–26 August, Jehu Island, Korea; 2011.

[14]

Straumit I, Lomov S, Verpoest I, Wevers M. Determination of the local fibers orientation in a composite material from a micro-CT data. In Proceedings of composites week Leuven and TEXCOMP-11 conference, 16–20 September, Leuven, Belgium; 2013.

[15]

Balać "Modeling of the matrix porosity influence on the elastic properties of particulate biocomposites" FME Trans (2012)

[16]

Effects of Process-Induced Voids on the Properties of Fibre Reinforced Composites

Chensong Dong

Journal of Materials Science & Technology 2016 10.1016/j.jmst.2016.04.011

[17]

Weissenborn O, Geller S, Gude M, Post F, Praetorius S, Voigt A, et al.. Deformation analysis of polymer foams under compression loading using in situ computed tomography and finite element simulation methods. In Proceedings of the 17th European conference on composite materials (ECCM17), 26–30 June, Munich, Germany; 2016.

[18]

Mishnaevsky "Automatic voxel-based generation of 3D microstructural FE models and its application to the damage analysis of composites" Mater Sci Eng A (2005) 10.1016/j.msea.2005.06.047

[19]

Zhang "Artificial neural networks applied on polymers and composites: a review" Compos Sci Technol (2003) 10.1016/s0266-3538(03)00106-4

[20]

Hajela "Soft computing in multi-disciplinary aerospace design-new directions of research" Prog Aerosp Sci (2002) 10.1016/s0376-0421(01)00015-x

[21]

Farley "High resolution non-destructive evaluation of defects using artificial neural networks and wavelets" NDT&E Int (2012) 10.1016/j.ndteint.2012.08.011

[22]

Haj-Ali "Nonlinear constitutive models for FRP composites using artificial neural networks" Mech Mater (2007) 10.1016/j.mechmat.2007.05.004

[23]

Baris (2008)

[24]

Balokas "Neural network assisted multiscale analysis for the elastic properties prediction of 3D braided composites under uncertainty" Compos Struct (2018) 10.1016/j.compstruct.2017.06.037

[25]

Tserpes "A numerical methodology for simulating the mechanical behavior of CFRP laminates containing pores using X-Ray Computed Tomography data" Compos B (2016) 10.1016/j.compositesb.2016.07.019

[26]

Stamopoulos "Multiscale finite element prediction of shear and flexural properties of porous CFRP laminates utilizing X-ray CT data" Theor Appl Fract Mech (2017)

[27]

VGStudio MAX reference manual v2.2. Volume graphics GmbH; 1998–2014.

[28]

Standard test method for tensile properties of polymer matrix composite materials. Designation: D3039/D3039M-95a. American Society for Testing of Materials (ASTM); 1995.

[29]

ISO 14125:1998. Fibre-reinforced plastic composites, determination of flexural properties, English version of DIN EN ISO 14125; 1995.

[30]

Standard test method for short-beam strength of polymer matrix composite materials and their laminates. Designation: D2344/D2344M–00, American society for testing of materials (ASTM); 1995.

[31]

(2009)

[32]

(2008)

[33]

Ash (2008)

[34]

Reh "MObjects – a novel method for the visualization and interactive exploration of defects in industrial XCT data" IEEE Trans Vis Comput Graph (TVCG) (2013) 10.1109/tvcg.2013.177

[35]

Saridakis "Applying neural networks, genetic algorithms and fuzzy logic for the identification of cracks in shafts by using coupled response measurements" Comput Struct (2008) 10.1016/j.compstruc.2007.08.004

[36]

Demuth (2002)

[37]

Hagan (2014)

[38]

Vakili "Experimental investigation and modeling of thermal radiative properties of f-CNTs nanofluid by artificial neural network with Levenberg–Marquardt algorithm" Int Commun Heat Mass Transfer (2016) 10.1016/j.icheatmasstransfer.2016.09.011

[39]

Iqbal "Levenberg-Marquardt method for solving absolute value equations" J Comput Appl Math (2015) 10.1016/j.cam.2014.11.062

Cited By

62

Non-destructive testing and structural health monitoring technologies for carbon fiber reinforced polymers: a review

Shanling Han, Qizhuang Li · 2024

Nondestructive Testing and Evaluati...

Automatic void content assessment of composite laminates using a machine-learning approach

João M. Machado, João Manuel R.S. Tavares · 2022

Composite Structures

Metrics

62

Citations

39

References

Details

Published: May 01, 2018
Vol/Issue: 192
Pages: 327-335
License: View

Authors

Cite This Article

A.G. Stamopoulos, K.I. Tserpes, A.J. Dentsoras (2018). Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks. Composite Structures, 192, 327-335. https://doi.org/10.1016/j.compstruct.2018.02.096

Quality assessment of porous CFRP specimens using X-ray Computed Tomography data and Artificial Neural Networks

You May Also Like