Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact

Suchao Xie; Kunkun Jing; Hui Zhou; Xiang Liu

doi:10.1016/j.compstruct.2019.111814

journal article Mar 01, 2020

Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact

Suchao Xie

Kunkun Jing Hui Zhou

Xiang Liu

Composite Structures Vol. 235 pp. 111814 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2019.111814

Topics

No keywords indexed for this article. Browse by subject →

References

46

[1]

Wang "Low-velocity impact characteristics and residual tensile strength of carbon fiber composite lattice core sandwich structures" Compos B Eng (2011) 10.1016/j.compositesb.2011.01.007

[2]

Xiong "Mechanical behaviors of carbon fiber composite sandwich columns with three dimensional honeycomb cores under in-plane compression" Compos B Eng (2014) 10.1016/j.compositesb.2013.12.049

[3]

He "Low-velocity impact response and post-impact flexural behaviour of composite sandwich structures with corrugated cores" Compos Struct (2018) 10.1016/j.compstruct.2018.01.024

[4]

Pydah "Blast loading of bumper shielded hybrid two-core Miura-ori/ honeycomb core sandwich plates" Thin-Walled Structures (2018) 10.1016/j.tws.2018.03.020

[5]

Giglio "Numerical investigation of a three point bending test on sandwich panels with aluminum skins and Nomex™ honeycomb core" Comput Mater Sci (2012) 10.1016/j.commatsci.2012.01.007

[6]

Foo "A model to predict low-velocity impact response and damage in sandwich composites" Compos Sci Technol (2008) 10.1016/j.compscitech.2007.12.007

[7]

Zinno "Multiscale approach for the design of composite sandwich structures for train application" Compos Struct (2010) 10.1016/j.compstruct.2009.08.044

[8]

Gilioli "Compression after impact test (CAI) on NOMEX™ honeycomb sandwich panels with thin aluminum skins" Compos B Eng (2014) 10.1016/j.compositesb.2014.07.015

[9]

Yang "Structural optimisation for the collapse zone of a railway vehicle" Int J Mech Sci (2020) 10.1016/j.ijmecsci.2019.105201

[10]

Aminanda "Experimental analysis and modeling of the crushing of honeycomb core" Appl Compos Mater (2005) 10.1007/s10443-005-1125-3

[11]

Kolopp "Experimental study of sandwich structures as armour against medium-velocity impacts" Int J Impact Eng (2013) 10.1016/j.ijimpeng.2013.05.007

[12]

Chen "Experimental and numerical study of composite lightweight structural insulated panel with expanded polystyrene core against windborne debris impacts" Mater Des (2014) 10.1016/j.matdes.2014.04.038

[13]

Ramakrishnan "Effect of block copolymer nano- reinforcements on the low velocity impact response of sandwich structures" Compos Struct (2014) 10.1016/j.compstruct.2013.12.001

[14]

Yin "Crashworthiness design for honeycomb structures under axial dynamic loading" Int J Comput Methods (2011) 10.1142/s0219876211002885

[15]

Yin "Theoretical prediction and numerical simulation of honeycomb structures with various cell specifications under axial loading" Int J Mech Mater Des (2011) 10.1007/s10999-011-9163-5

[16]

Anghileri "A survey of numerical models for hail impact analysis using explicit finite element codes" Int J Impact Eng (2005) 10.1016/j.ijimpeng.2004.06.009

[17]

Wang "Impact behavior and energy absorption of paper honeycomb sandwich panels" Int J Impact Eng (2009) 10.1016/j.ijimpeng.2008.03.002

[18]

Yin "Optimisation for bending crashworthiness of functionally graded foam-filled cellular structure" Int J Crashworthiness (2018) 10.1080/13588265.2017.1345589

[19]

Yang "Further assessment of deceleration-time histories for occupant injury and the damage of protected object in a crash stop" Int J Impact Eng (2019) 10.1016/j.ijimpeng.2019.04.013

[20]

Zhang "Drop-weight impact behavior of honeycomb sandwich panels under a spherical impactor" Compos Struct (2017) 10.1016/j.compstruct.2017.02.053

[21]

Sun "An analytical study of the plasticity of sandwich honeycomb panels subjected to low-velocity impact" Compos B Eng (2019) 10.1016/j.compositesb.2018.12.071

[22]

Zhou "Low velocity impact denting of HSSA lightweight sandwich panel" Int J Mech Sci (2006) 10.1016/j.ijmecsci.2006.05.011

[23]

Aktay "Prediction of impact damage on sandwich composite panels" Comput Mater Sci (2005) 10.1016/j.commatsci.2004.09.044

[24]

Meo "Numerical simulations of low-velocity impact on an aircraft sandwich panel" Compos Struct (2003) 10.1016/j.compstruct.2003.09.035

[25]

Raju K. S, Tomblin J. S. Damage characteristics in sandwich panels subjected to static indentation using spherical indentors. In Proceedings of the 42nd AIAA/ASME/ASC E/AHS/ASC Structures, structural dynamics, and materials conference 2001, Seattle, Washington, April 16–19 2001, Paper No. AIAA 2001-1189 (American Institute of Aeronautics and Astronautics, Reston, Virginia). 10.2514/6.2001-1189

[26]

Raju "Impact damage resistance and tolerance of honeycomb core sandwich panels" Composite Mater (2008) 10.1177/0021998307088596

[27]

Chen "Low-velocity impact response of composite sandwich structures: Modelling and experiment" Compos Struct (2017) 10.1016/j.compstruct.2017.02.064

[28]

Foo "Low-velocity impact failure of aluminum honeycomb sandwich panels" Compos Struct (2008) 10.1016/j.compstruct.2007.10.016

[29]

Staal "Predicting Failure Loads of Impact Damaged Honeycomb Sandwich Panels-A Refined Model" J Sandwich Struct Mater (2011) 10.1177/1099636208105039

[30]

Zhou "Investigation of parameters governing the damage and energy absorption characteristics of honeycomb sandwich panels" J Sandwich Struct Mater (2007) 10.1177/1099636207067134

[31]

Crupi "Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading" Int J Impact Eng (2012) 10.1016/j.ijimpeng.2011.12.002

[32]

Crupi "Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam" Mar struct (2013) 10.1016/j.marstruc.2012.11.002

[33]

Olsson "Improved theory for contact indentation of sandwich panels" AIAA JOURNAL (1996) 10.2514/3.13218

[34]

Olsson "Analytical prediction of large mass impact damage in composite laminates" Compos A Appl Sci Manuf (2001) 10.1016/s1359-835x(01)00073-2

[35]

Timoshenko (1959)

[36]

Zhou "Mechanical performance and energy absorption properties of structures combining two Nomex honeycombs" Compos Struct (2018) 10.1016/j.compstruct.2017.11.059

[37]

Wu "Experimental and numerical investigation of static and fatigue behaviors of composites honeycomb sandwich structure" Compos Struct (2019) 10.1016/j.compstruct.2019.01.081

[38]

ASTM "D7766/D7766M—15, Standard practice for damage resistance testing of sandwich constructions. West Conshohocken (PA): ASTM" International (2005)

[39]

Aktay "Numerical modelling of honeycomb core crush behaviour" Eng Fract Mech (2008) 10.1016/j.engfracmech.2007.03.008

[40]

Giglio "Investigations on sandwich core properties through an experimental–numerical approach" Composites Part B: Eng (2012) 10.1016/j.compositesb.2011.08.016

[41]

Roy "Characterization of Nomex honeycomb core constituent material mechanical properties" Compos Struct (2014) 10.1016/j.compstruct.2014.06.033

[42]

Numerical modelling of Nomex honeycomb sandwich cores at meso-scale level

Ralf Seemann, Dieter Krause

Composite Structures 2017 10.1016/j.compstruct.2016.09.071

[43]

Jaafar "A 3D FE Modeling of Machining Process of Nomex® Honeycomb Core: Influence of the Cell Structure Behaviour and Specific Tool Geometry" Procedia CIRP (2017) 10.1016/j.procir.2017.03.255

[44]

Fischer "Mechanical tests for foldcore base material properties" Compos A Appl Sci Manuf (2009) 10.1016/j.compositesa.2009.03.005

[45]

Liu "The flatwise compressive properties of Nomex honeycomb core with debonding imperfections in the double cell wall" Compos B Eng (2015) 10.1016/j.compositesb.2015.02.017

[46]

Liu "Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading" Compos Struct (2015) 10.1016/j.compstruct.2014.11.034

Cited By

104

Numerical Assessment of Multi-Cell Thin-Walled Beams under Three-Point Bending for Automotive Safety

Mehmet Kopar, Medeni Sömer · 2026

Fırat Üniversitesi Mühendislik Bili...

Recent Advances in Limiting Fatigue Damage Accumulation Induced by Self-Heating in Polymer–Matrix Composites

Jafar Amraei, Andrzej Katunin · 2022

Polymers

Energy-absorption characteristics of tube-reinforced absorbent honeycomb sandwich structure

Leilei Yan, Keyu Zhu · 2021

Composite Structures

Crashworthiness analysis of bionic thin-walled tubes inspired by the evolution laws of plant stems

Chao Gong, Zhonghao Bai · 2020

Thin-Walled Structures

Metrics

104

Citations

46

References

Details

Published: Mar 01, 2020
Vol/Issue: 235
Pages: 111814
License: View

Authors

High-Throughput Molecular Drug Discovery Center, Tianjin Joint Academy of Biotechnology and Medicine, Tianjin 300457, China

Funding

National Natural Science Foundation of China Award: 51775558

Central South University

Cite This Article

Suchao Xie, Kunkun Jing, Hui Zhou, et al. (2020). Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact. Composite Structures, 235, 111814. https://doi.org/10.1016/j.compstruct.2019.111814

Mechanical properties of Nomex honeycomb sandwich panels under dynamic impact

You May Also Like