Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading

Ghazaleh Eslami; Sonia Yanes-Armas; Thomas Keller

doi:10.1016/j.compstruct.2020.112496

journal article Open Access Sep 01, 2020

Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading

Ghazaleh Eslami Sonia Yanes-Armas Thomas Keller

Composite Structures Vol. 248 pp. 112496 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2020.112496

Topics

No keywords indexed for this article. Browse by subject →

References

22

[1]

Keller "System ductility and redundancy of FRP beam structures with ductile adhesive joints" Compos Part B Eng (2005) 10.1016/j.compositesb.2005.05.001

[2]

Keller "Composite Action and Adhesive Bond between Fiber-Reinforced Polymer Bridge Decks and Main Girders" J Compos Constr (2005) 10.1061/(asce)1090-0268(2005)9:4(360)

[3]

Yanes-Armas "Energy dissipation and recovery in web–flange junctions of pultruded GFRP decks" Compos Struct (2016) 10.1016/j.compstruct.2016.03.042

[4]

Angelidi "Ductile adhesively-bonded timber joints – Part 1: Experimental investigation" Constr Build Mater (2018) 10.1016/j.conbuildmat.2018.05.214

[5]

Avendaño "Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive" Compos Struct (2016) 10.1016/j.compstruct.2016.05.034

[6]

Fiberline Composites, Fiberline Design Manual, (2003).

[7]

Othman "Specific bearing strength of bolted composite joint with different glass fiber reinforcement" ARPN J Eng Appl Sci (2016)

[8]

Gattesco "Experimental investigation on the behavior of glued-in rod joints in timber beams subjected to monotonic and cyclic loading" Eng Struct (2017) 10.1016/j.engstruct.2017.03.078

[9]

Žarnić "Response of laminated glass-CLT structural components to reverse-cyclic lateral loading" Constr Build Mater (2020) 10.1016/j.conbuildmat.2019.117509

[10]

Ye "Seismic performance of cold-formed steel bolted moment connections with bolting friction-slip mechanism" J Constr Steel Res (2019) 10.1016/j.jcsr.2019.01.013

[11]

Dai "Cyclic performance of steel storage rack beam-to-upright bolted connections" J Constr Steel Res (2018) 10.1016/j.jcsr.2018.04.012

[12]

Xiao "Comparative study of energy dissipation capacity of steel and glass fibre-reinforced polymer frames with bonded sleeve connections" J Reinf Plast Compos (2017) 10.1177/0731684417723714

[13]

Zhang "Cyclic performance of bonded sleeve beam-column connections for FRP tubular sections" Compos Part B Eng (2018) 10.1016/j.compositesb.2018.01.024

[14]

Qiu "Cyclic performance of splice connections for hollow section fibre reinforced polymer members" Compos Struct (2020) 10.1016/j.compstruct.2020.112222

[15]

Martins "Experimental and numerical analysis of GFRP frame structures. Part 1: Cyclic behaviour at the connection level" Compos Struct (2019) 10.1016/j.compstruct.2019.03.097

[16]

Keller "GFRP-Balsa Sandwich Bridge Deck: Concept, Design, and Experimental Validation" Compos Constr (2014) 10.1061/(asce)cc.1943-5614.0000423

[17]

Ductility, recovery and strain rate dependency of an acrylic structural adhesive

Myrsini Angelidi, Anastasios P. Vassilopoulos, Thomas Keller

Construction and Building Materials 2017 10.1016/j.conbuildmat.2017.02.101

[18]

H. Krawinkler, F. Parisi, L. Ibarra, A. Ayoub, R. Medina, Development of a Testing Protocol for Woodframe Structures, CUREE Publ. No. W-02. (2001) 1–76. https://www.curee.org/publications/woodframe/downloads/CUREEpub_W-02.pdf%0Awww.curee.org.

[19]

ASTM Standard E2126, 2019, Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings, ASTM Int. West Conshohocken, PA,. (2019) 1–15. Doi: 10.1520/E2126—19. 10.1520/e2126-19

[20]

Iso 1667:2003, Timber structures — Joints made with mechanical fasteners — Quasi-static reversed-cyclic test method, (2003). https://www.iso.org/standard/31041.html.

[21]

ASTM D5573, Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP), (2012). Doi: 10.1520/D5573-99R12.2.

[22]

CEN12512, Timber structures – test methods – cyclic testing of joints made with mechanical fasteners [including amendment A1:2005], BS EN 1251 (2005). http://canterbury.summon.serialssolutions.com.

Metrics

22

Citations

22

References

Details

Published: Sep 01, 2020
Vol/Issue: 248
Pages: 112496
License: View

Authors

ACOMED statistic, Leipzig, Germany

Cite This Article

Ghazaleh Eslami, Sonia Yanes-Armas, Thomas Keller (2020). Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading. Composite Structures, 248, 112496. https://doi.org/10.1016/j.compstruct.2020.112496

Energy dissipation in adhesive and bolted pultruded GFRP double-lap joints under cyclic loading

You May Also Like