A dynamic cutting force model for transverse orthogonal cutting of unidirectional carbon/carbon composites considering fiber distribution

Chenwei Shan; Yang Yang; Shengnan Zhang; Ming Luo

doi:10.1016/j.compstruct.2020.112668

journal article Open Access Nov 01, 2020

A dynamic cutting force model for transverse orthogonal cutting of unidirectional carbon/carbon composites considering fiber distribution

Chenwei Shan

Yang Yang

Shengnan Zhang

Ming Luo

Composite Structures Vol. 251 pp. 112668 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2020.112668

Topics

No keywords indexed for this article. Browse by subject →

References

41

[1]

Savage (1993)

[2]

Modelling of machinability parameters of carbon–carbon composite—a response surface approach

P.M. George, B.K. Raghunath, L.M. Manocha et al.

Journal of Materials Processing Technology 2004 10.1016/j.jmatprotec.2004.04.354

[3]

George "EDM machining of carbon–carbon composite—a Taguchi approach" J Mater Process Technol (2004) 10.1016/s0924-0136(03)00863-x

[4]

Li (2014)

[5]

Shan "Rotary ultrasonic drilling of needle-punched carbon/carbon composites: comparisons with conventional twist drilling and high-speed drilling" Int J Adv Manuf Technol (2018) 10.1007/s00170-017-1228-7

[6]

Ferreira "Characteristics of carbon–carbon composite turning" J Mater Process Technol (2001) 10.1016/s0924-0136(00)00776-7

[7]

Gavalda Diaz "Towards understanding the cutting and fracture mechanism in ceramic matrix composites" Int J Mach Tools Manuf (2017) 10.1016/j.ijmachtools.2017.03.008

[8]

Shan "Lyu X. Prediction of cutting forces in ball-end milling of 2.5D C/C composites" Chin J Aeronaut (2016) 10.1016/j.cja.2015.12.015

[9]

Shan "Three-dimensional numerical simulation for drilling of 2.5D carbon/carbon composites" Int J Adv Manuf Technol (2017) 10.1007/s00170-017-0653-y

[10]

Shokrieh "Progressive fatigue damage modeling of composite materials, Part I: modeling" J Compos Mater (2000) 10.1177/002199830003401301

[11]

Zhang "A force prediction model for cutting unidirectional fibre-reinforced plastics" Mach Sci Technol (2001) 10.1081/mst-100108616

[12]

Sahraie Jahromi "An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites" Compos Sci Technol (2010) 10.1016/j.compscitech.2010.09.005

[13]

Karpat "Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates" Int J Mach Tools Manuf (2012) 10.1016/j.ijmachtools.2012.01.001

[14]

Karpat "Milling force modelling of multidirectional carbon fiber reinforced polymer laminates" Procedia CIRP (2012) 10.1016/j.procir.2012.04.082

[15]

Qi "Microscopic mechanism based force prediction in orthogonal cutting of unidirectional CFRP" Int J Adv Manuf Technol (2015) 10.1007/s00170-015-6895-7

[16]

Xu "On the mechanics and material removal mechanisms of vibration-assisted cutting of unidirectional fibre-reinforced polymer composites" Int J Mach Tools Manuf (2014) 10.1016/j.ijmachtools.2014.02.004

[17]

Xu "Mechanics of fibre deformation and fracture in vibration-assisted cutting of unidirectional fibre-reinforced polymer composites" Int J Mach Tools Manuf (2016) 10.1016/j.ijmachtools.2016.01.002

[18]

Li "An energy based force prediction method for UD-CFRP orthogonal machining" Compos Struct (2017) 10.1016/j.compstruct.2016.09.051

[19]

Mei "An approach on capturing the influence of the stochasticity of fibre distributions for modelling the variability of cutting forces in composite materials" Compos B: Eng (2017) 10.1016/j.compositesb.2017.05.056

[20]

Elastic properties of reinforced solids: Some theoretical principles

R. Hill

Journal of the Mechanics and Physics of Solids 1963 10.1016/0022-5096(63)90036-x

[21]

Brockenbrough "Deformation of metal-matrix composites with continuous fibers: geometrical effects of fiber distribution and shape" Acta Metall Mater (1991) 10.1016/0956-7151(91)90274-5

[22]

Yang "Modeling of non-uniform spatial arrangement of fibers in a ceramic matrix composite" Acta Mater (1997) 10.1016/s1359-6454(96)00394-1

[23]

Pyrz "Quantitative description of the microstructure of composites. Part I: morphology of unidirectional composite systems" Compos Sci Technol (1994) 10.1016/0266-3538(94)90141-4

[24]

Shan "Representative volume element for non-uniform micro-structure" Comput Mater Sci (2002) 10.1016/s0927-0256(01)00257-9

[25]

Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers

D. Trias, J. Costa, A. Turon et al.

Acta Materialia 2006 10.1016/j.actamat.2006.03.042

[26]

Gusev "Fiber packing and elastic properties of a transversely random unidirectional glass/epoxy composite" Compos Sci Technol (2000) 10.1016/s0266-3538(99)00152-9

[27]

Melro "Generation of random distribution of fibres in long-fibre reinforced composites" Compos Sci Technol (2008) 10.1016/j.compscitech.2008.03.013

[28]

Vaughan "A combined experimental–numerical approach for generating statistically equivalent fibre distributions for high strength laminated composite materials" Compos Sci Technol (2010) 10.1016/j.compscitech.2009.10.020

[29]

Catalanotti "On the generation of RVE-based models of composites reinforced with long fibres or spherical particles" Compos Struct (2016) 10.1016/j.compstruct.2015.11.039

[30]

Maragoni "Development, validation and analysis of an efficient micro-scale representative volume element for unidirectional composites" Compos A Appl Sci Manuf (2018) 10.1016/j.compositesa.2018.04.025

[31]

Li "A new approach to rapidly generate random periodic representative volume elements for microstructural assessment of high volume fraction composites" Mater Des (2018) 10.1016/j.matdes.2018.04.031

[32]

Catalanotti "An algorithm for the generation of three-dimensional statistically representative volume elements of unidirectional fibre-reinforced plastics: focusing on the fibres waviness" Compos Struct (2019) 10.1016/j.compstruct.2019.111272

[33]

Wang "A long-range force based random method for generating anisotropic 2D fiber arrangement statistically equivalent to real composites" Compos Sci Technol (2019) 10.1016/j.compscitech.2019.05.013

[34]

Su "Size effect of depth of cut on chip formation mechanism in machining of CFRP" Compos Struct (2017) 10.1016/j.compstruct.2016.11.044

[35]

Reifsnider (2002)

[36]

Biot "Bending of an infinite beam on an elastic foundation" Zeitschrift fiir Angewandte Maihematik und Mechanik (1922)

[37]

Hetényi (1971)

[38]

Johnson "Contact mechanics" J Tribol (1986) 10.1115/1.3261297

[39]

Flamant "Sur la répartition des pressions dans un solide rectangulaire chargé transversalement" CR Acad Sci Paris (1892)

[40]

Gusev "Representative volume element size for elastic composites: a numerical study" J Mech Phys Solids (1997) 10.1016/s0022-5096(97)00016-1

[41]

Trias "Random models versus periodic models for fibre reinforced composites" Comput Mater Sci (2006) 10.1016/j.commatsci.2006.03.005

Cited By

31

Scratch-induced surface formation mechanism in C/SiC composites

Chenwei Shan, Ziwen Xia · 2024

International Journal of Mechanical...

Metrics

31

Citations

41

References

Details

Published: Nov 01, 2020
Vol/Issue: 251
Pages: 112668
License: View

Authors

Shenzhen Key Laboratory of Pathogen and Immunity, Shenzhen Third People’s Hospital, Shenzhen, China.

Hubei University of Medicine

Funding

National Natural Science Foundation of China

Fundamental Research Funds for the Central Universities

Natural Science Foundation of Shaanxi Province

Cite This Article

Chenwei Shan, Yang Yang, Shengnan Zhang, et al. (2020). A dynamic cutting force model for transverse orthogonal cutting of unidirectional carbon/carbon composites considering fiber distribution. Composite Structures, 251, 112668. https://doi.org/10.1016/j.compstruct.2020.112668

A dynamic cutting force model for transverse orthogonal cutting of unidirectional carbon/carbon composites considering fiber distribution

You May Also Like