A review of the structural factors which control compression in carbon fibres and their composites

Srinivas Nunna; Anil R. Ravindran; Jens Mroszczok; Claudia Creighton; Russell J. Varley

doi:10.1016/j.compstruct.2022.116293

journal article Jan 01, 2023

A review of the structural factors which control compression in carbon fibres and their composites

Srinivas Nunna Anil R. Ravindran Jens Mroszczok Claudia Creighton Russell J. Varley

Composite Structures Vol. 303 pp. 116293 · Elsevier BV

View at Publisher Save 10.1016/j.compstruct.2022.116293

Topics

No keywords indexed for this article. Browse by subject →

References

198

[1]

Zhao "Influence of heating procedures on the surface structure of stabilized polyacrylonitrile fibers" Appl Surf Sci (2018) 10.1016/j.apsusc.2017.09.252

[2]

Nunna S, Maghe M, Rana R, Varley RJ, Knorr DB, Jr., Sands JM, et al. Time Dependent Structure and Property Evolution in Fibres during Continuous Carbon Fibre Manufacturing. Materials (Basel). 2019;12:1069(1-10). 10.3390/ma12071069

[3]

Oya; N, Johnson DJ. Longitudinal compressive behaviour and microstructure of PANbased carbon fibres. Carbon. 2001;39(5):635-45. 10.1016/s0008-6223(00)00147-0

[4]

Chen "Thermoplastic reaction injection pultrusion for continuous glass fiber-reinforced polyamide-6 composites" Materials (2019)

[5]

Dransfield "Improving the delamination resistance of CFRP by stitching—a review" Compos Sci Technol (1994) 10.1016/0266-3538(94)90019-1

[6]

Creighton "Multiple field image analysis procedure for characterization of fibre alignment in composites" Compos Part A: Appl Sci Manuf (2001) 10.1016/s1359-835x(00)00115-9

[7]

Verghese "Pultruded carbon fiber/vinyl ester composites processed with different fiber sizing agents. Part III. Theoretical aspects" J Mater Civ Eng (2005) 10.1061/(asce)0899-1561(2005)17:3(343)

[8]

Thomsen OT, Kratmann KK. Experimental characterisation of parameters controlling the compressive failure of pultruded unidirectional carbon fibre composites. 7th International Conference on Advances in Experimental Mechanics. Liverpool2010. p. 15-22. 10.4028/www.scientific.net/amm.24-25.15

[9]

Isa MD, Feih S, Mouritz AP. Compression fatigue properties of z-pinned quasi-isotropic carbon/epoxy laminate with barely visible impact damage. Composite Structures. 2011;93(9):2269-76. 10.1016/j.compstruct.2011.03.015

[10]

Al-Mosawe "Engineering properties of CFRP laminate under high strain rates" Compos Struct (2017) 10.1016/j.compstruct.2017.08.005

[11]

Qin "Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase" Compos B Eng (2015) 10.1016/j.compositesb.2014.10.014

[12]

Swolfs "Tensile behaviour of intralayer hybrid composites of carbon fibre and self-reinforced polypropylene" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.01.001

[13]

Ashrafi "Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes" Compos Sci Technol (2011) 10.1016/j.compscitech.2011.06.015

[14]

Kim "Tensile Properties of Carbon Fiber Composites with Different Resin Compositions at Cryogenic Temperatures" Adv Compos Mater (2010) 10.1163/156855109x434838

[15]

Baral "High modulus carbon fibre composites: Correlation between transverse tensile and mode I interlaminar fracture properties" Mater Lett (2008) 10.1016/j.matlet.2007.07.071

[16]

Squires "Understanding the factors affecting the compressive testing of unidirectional carbon fibre composites" Compos Part B: Eng (2007) 10.1016/j.compositesb.2006.08.002

[17]

Lee "Thickness effect on the compressive strength of T800/924C carbon fibre–epoxy laminates" Compos A Appl Sci Manuf (2005) 10.1016/s1359-835x(04)00158-7

[18]

Savage "Exploiting the fracture properties of carbon fibre composites to design lightweight energy absorbing structures" Eng Fail Anal (2004) 10.1016/j.engfailanal.2004.01.001

[19]

Nightingale "Flexural and interlaminar shear strength properties of carbon fibre/epoxy composites cured thermally and with microwave radiation" Compos Part A: Appl Sci Eng (2002) 10.1016/s1359-835x(02)00031-3

[20]

Stecenko "Variation of Elastic Moduli with Strain in Carbon/Epoxy Laminates" J Compos Mater (1990) 10.1177/002199839002401103

[21]

Curtis "An assessment of the potential of woven carbon fibre-reinforced plastics for high performance applications" Composites (1984) 10.1016/0010-4361(84)90706-7

[22]

Manocha "Role of fibre surface-matrix combination in carbon fibre reinforced epoxy composites" J Mater Sci (1982) 10.1007/bf00644685

[23]

Wh "Non Hookean Behaviour in the Fibre Direction of Carbon-Fibre Composites and the Influence of Fibre Waviness on the Tensile Properties" J Compos Mater (1977) 10.1177/002199837701100408

[24]

Allen "Tensile recoil measurement of compressive strength for polymeric high performance fibres" J Mater Sci (1987) 10.1007/bf01103520

[25]

Shinohara "A novel method for measuring direct compressive properties of carbon fibres using a micro-mechanical compression tester" J Mater Sci (1993) 10.1007/bf00356404

[26]

Leal "Compressive Strength Analysis for High Performance Fibers with Different Modulus in Tension and Compression" J Compos Mater (2009) 10.1177/0021998308088589

[27]

Fidana "Compressive properties of high-performance polymeric fibers" Compos Sci Technol (1993) 10.1016/0266-3538(93)90110-3

[28]

Hawthorne "Axial compression fracture in carbon fibres" J Mater Sci (1975) 10.1007/bf00541030

[29]

Ji "Mechanical and Interfacial Properties Characterisation of Single Carbon Fibres for Composite Applications" Exp Mech (2015) 10.1007/s11340-015-0007-3

[30]

Zu "Characterization of Carbon Nanotube Fiber Compressive Properties Using Tensile Recoil Measurement" ACS Nano (2012) 10.1021/nn300857d

[31]

Dobb "Compressional behaviour of carbon fibres" J Mater Sci (1990) 10.1007/bf03372169

[32]

Kumar "Axial compressive strength testing of single carbon fibres" Arch Mech (2013)

[33]

Shioya "Compressive strengths of single carbon fibres and composite strands" Compos Sci Technol (2000) 10.1016/s0266-3538(99)00123-2

[34]

Wang "Improved testing method for the compressive strength of single fiber" Measurement (2016) 10.1016/j.measurement.2016.06.024

[35]

Nakatani "Axial compressive fracture of carbon fibers" Carbon (1999) 10.1016/s0008-6223(98)00230-9

[36]

Ueda "Longitudinal direct compression test of a single carbon fiber in a scanning electron microscope" Compos A Appl Sci Manuf (2014) 10.1016/j.compositesa.2014.08.021

[37]

Wang "Anisotropic compressive behaviour of turbostratic graphite in carbon fibre" Appl Mater Today (2017) 10.1016/j.apmt.2017.07.010

[38]

Boming "Experimental Investigation of the Longitudinal Compressive Strength of Carbon Fibres With a Direct Measurement System" Polym Polym Compos (2011)

[39]

Ueda "Compression test of a single carbon fiber in a scanning electron microscope and its evaluation via finite element analysis" Adv Compos Mater (2018) 10.1080/09243046.2018.1433506

[40]

Nunna "Evolution of radial heterogeneity in polyacrylonitrile fibres during thermal stabilization: An overview" Polym Degrad Stab (2017) 10.1016/j.polymdegradstab.2016.12.007

[41]

Frank "Carbon Fibers: Precursor Systems, Processing, Structure, and Properties" Angew Chem Int Ed (2014) 10.1002/anie.201306129

[42]

Nunna "Investigation of progress of reactions and evolution of radial heterogeneity in the initial stage of thermal stabilization of PAN precursor fibres" Polym Degrad Stab (2016) 10.1016/j.polymdegradstab.2016.01.008

[43]

Frank "Carbon Fibers: Precursors, Manufacturing, and Properties" Macromol Mater Eng (2012) 10.1002/mame.201100406

[44]

Huang "Fabrication and Properties of Carbon Fibers" Materials (2009) 10.3390/ma2042369

[45]

Jain "Conversion of acrylonitrile-based precursor fibres to carbon fibres" J Mater Sci (1987) 10.1007/bf01160584

[46]

Xiao "The effect of heat treatment temperature and time on the microstructure and mechanical properties of PAN-based carbon fibers" J Mater Sci (2014) 10.1007/s10853-013-7762-2

[47]

Xiao "Effect of Structure on the Mechanical Properties of PAN-Based Carbon Fibers during Graphitization" Mater Sci Forum (2011) 10.4028/www.scientific.net/msf.686.770

[48]

You "Synchrotron study on the evolution of the radial structural distribution of carbon fiber monofilaments during heat treatment process" RSC Adv (2020) 10.1039/d0ra02317e

[49]

Rahaman "A review of heat treatment on polyacrylonitrile fiber" Polym Degrad Stab (2007) 10.1016/j.polymdegradstab.2007.03.023

[50]

Edie "The effect of processing on the structure and properties of carbon fibers" Carbon (1998) 10.1016/s0008-6223(97)00185-1

Showing 50 of 198 references

Metrics

51

Citations

198

References

Details

Published: Jan 01, 2023
Vol/Issue: 303
Pages: 116293
License: View

Authors

Cite This Article

Srinivas Nunna, Anil R. Ravindran, Jens Mroszczok, et al. (2023). A review of the structural factors which control compression in carbon fibres and their composites. Composite Structures, 303, 116293. https://doi.org/10.1016/j.compstruct.2022.116293

A review of the structural factors which control compression in carbon fibres and their composites

You May Also Like