journal article
Nov 01, 2025
Numerical and experimental study on the open-hole tensile properties of angle-ply carbon/glass hybrid laminates based on thin-ply carbon fiber prepreg
Topics
No keywords indexed for this article. Browse by subject →
References
41
[1]
Hu "Effect of off-axis ply on tensile properties of [0/θ]ns thin ply laminates by experiments and numerical method" Polym (2021) 10.3390/polym13111809
[2]
Fotouhi "Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission" Compos Part A Appl Sci Manuf (2016) 10.1016/j.compositesa.2016.04.003
[3]
Hu "Pseudo‐ductility behavior of carbon/glass hybrid composites with unidirectionally arrayed chopped strands: Experimental and numerical research" Polym Compos (2024) 10.1002/pc.28796
[4]
Hasan "Fibre hybrid composites consisting of discontinuous waste carbon fibre and continuous glass filaments developed for load-bearing structures with improved impact strength" Compos Part A Appl Sci Manuf (2019) 10.1016/j.compositesa.2019.105610
[5]
Murugan "Delamination study on glass/carbon hybrid composite laminates for structural applications" Mater Today Proc (2023) 10.1016/j.matpr.2022.09.400
[6]
Sayer "The effect of temperatures on hybrid composite laminates under impact loading" Compos Part B Eng (2012) 10.1016/j.compositesb.2012.02.037
[7]
Li "Low-velocity impact damage monitoring and repair of glass fiber reinforced polymer laminates with carbon nanotube coated PA film sensor using ERT technology" Constr Build Mater (2025) 10.1016/j.conbuildmat.2025.140503
[8]
Low-velocity impact and compression-after-impact behaviors of carbon/glass fiber hybrid composite laminates based on thin-ply carbon fiber prepreg and unidirectionally arrayed chopped strand
Yinyuan Huang, Ya Liu, Hai-Wang Liu et al.
Thin-Walled Structures
2025
10.1016/j.tws.2025.113075
[9]
Galos "Thin-ply composite laminates: a review" Compos Struct (2020) 10.1016/j.compstruct.2020.111920
[10]
Czél "Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy–glass/epoxy hybrid composites" Compos Struct (2016) 10.1016/j.compstruct.2016.02.010
[11]
Fotouhi "High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour in all fibre orientations" Compos Sci Technol (2017) 10.1016/j.compscitech.2017.08.024
[12]
Guillamet "A quick procedure to predict free-edge delamination in thin-ply laminates under tension" Eng Fract Mech (2016) 10.1016/j.engfracmech.2016.01.019
[13]
Zubillaga "An experimental study on matrix crack induced delamination in composite laminates" Compos Struct (2015) 10.1016/j.compstruct.2015.02.077
[14]
Fuller "Exploration of the potential for pseudo-ductility in thin ply CFRP angle-ply laminates via an analytical method" Compos Sci Technol (2015) 10.1016/j.compscitech.2015.02.019
[15]
Jalalvand "Numerical modelling of the damage modes in UD thin carbon/glass hybrid laminates" Compos Sci Technol (2014) 10.1016/j.compscitech.2014.01.013
[16]
Taketa "A new compression-molding approach using unidirectionally arrayed chopped strands" Compos Part A Appl Sci Manuf (2008) 10.1016/j.compositesa.2008.09.012
[17]
Chen "Failure of chopped carbon fiber Sheet Molding compound (SMC) composites under uniaxial tensile loading: Computational prediction and experimental analysis" Compos Part A Appl Sci Manuf (2019) 10.1016/j.compositesa.2018.12.021
[18]
Sun "Characterization and modeling of fatigue behavior of chopped glass fiber reinforced sheet molding compound (SMC) composite" Int J Fatigue (2022) 10.1016/j.ijfatigue.2021.106647
[19]
Czél "Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg" Compos Part A Appl Sci Manuf (2013) 10.1016/j.compositesa.2013.04.006
[20]
Fuller "Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates" Compos Part A Appl Sci Manuf (2015) 10.1016/j.compositesa.2014.11.004
[21]
Xiang "A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates" Thin Walled Struct (2022) 10.1016/j.tws.2022.109711
[22]
Leguillon "The onset of delamination at stress-free edges in angle-ply laminates - analysis of two criteria" Compos Sci Technol (2001) 10.1016/s0266-3538(00)00105-6
[23]
Chuaqui "Effects of ply angle and blocking on open-hole tensile strength of composite laminates: a design and certification perspective" Compos Part B Eng (2021) 10.1016/j.compositesb.2020.108582
[24]
Nijs "Notch-sensitivity of hybrid carbon-fibre/self-reinforced polypropylene composites" Compos Sci Technol (2020) 10.1016/j.compscitech.2020.108422
[25]
Zhang "Experimental and numerical research on opening size effect of novel short fiber reinforced composite laminates" Results Phys (2023) 10.1016/j.rinp.2023.106303
[26]
Green "An experimental investigation into the tensile strength scaling of notched composites" Compos A Appl Sci Manuf (2007) 10.1016/j.compositesa.2006.07.008
[27]
Vaidya "Effect of ply thickness on fracture of notched composite laminates" AIAA J (1998) 10.2514/2.355
[28]
Awerbuch "Notched strength of composite laminates: predictions and experiments—A review" J Reinf Plast Compos (2016) 10.1177/073168448500400102
[29]
Wisnom "Scaling effects in notched composites" J Compos Mater (2009) 10.1177/0021998309339865
[30]
Hallett "An experimental and numerical investigation into the damage mechanisms in notched composites" Compos A Appl Sci Manuf (2009) 10.1016/j.compositesa.2009.02.021
[31]
Erçin "Size effects on the tensile and compressive failure of notched composite laminates" Compos Struct (2013) 10.1016/j.compstruct.2012.10.004
[32]
Wisnom "The role of delamination in strength, failure mechanism and hole size effect in open hole tensile tests on quasi-isotropic laminates" Compos A Appl Sci Manuf (2009) 10.1016/j.compositesa.2008.12.013
[33]
Sihn "Experimental studies of thin-ply laminated composites" Compos Sci Technol (2007) 10.1016/j.compscitech.2006.06.008
[34]
Sawan "Unsupervised learning for classification of acoustic emission events from tensile and bending experiments with open-hole carbon fiber composite samples" Compos Sci Technol (2015) 10.1016/j.compscitech.2014.12.003
[35]
Caminero "Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation" Compos Part B Eng. (2013) 10.1016/j.compositesb.2013.04.050
[36]
Oz "In-situ imaging of inter- and intra-laminar damage in open-hole tension tests of carbon fibre-reinforced composites" Compos Struct (2020) 10.1016/j.compstruct.2020.112302
[37]
Hu "Pseudo‐ductility behavior of carbon/glass hybrid composites with unidirectionally arrayed chopped strands: experimental and numerical research" Polym Compos (2024) 10.1002/pc.28796
[38]
Fotouhi "High performance quasi-isotropic thin-ply carbon/glass hybrid composites with pseudo-ductile behaviour loaded off-axis" Compos Struct (2020) 10.1016/j.compstruct.2020.112444
[39]
Fotouhi "Investigating the fatigue behaviour of quasi-isotropic pseudo-ductile thin-ply carbon/glass epoxy hybrid composites" Compos Part A Appl Sci Manuf (2022) 10.1016/j.compositesa.2022.107206
[40]
Hashin "Fatigue failure criteria for unidirectional fiber composites" J Appl Mech (1981) 10.1115/1.3157744
[41]
Deng "A micromechanical model for the analysis of multidirectional fiber reinforced polymer laminates" Compos Struct (2018) 10.1016/j.compstruct.2018.10.019
Metrics
2
Citations
41
References
Details
- Published
- Nov 01, 2025
- Vol/Issue
- 372
- Pages
- 119577
- License
- View
Funding
National Natural Science Foundation of China
Award: 51808288
Cite This Article
Wenlong Lu, Haotian Yang, Hao Dong, et al. (2025). Numerical and experimental study on the open-hole tensile properties of angle-ply carbon/glass hybrid laminates based on thin-ply carbon fiber prepreg. Composite Structures, 372, 119577. https://doi.org/10.1016/j.compstruct.2025.119577
Related
You May Also Like
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush, Dong Lin · 2017
1,117 citations
Polymer composite materials: A comprehensive review
Rachid Hsissou, Rajaa Seghiri · 2021
970 citations
A critical review of recent research on functionally graded plates
D.K. Jha, Tarun Kant · 2013
779 citations
Free and forced vibrations of functionally graded polymer composite plates reinforced with graphene nanoplatelets
Mitao Song, Sritawat Kitipornchai · 2017
681 citations