Mechanism of the early stages of oxidation of WC–Co cemented carbides

Liyong Chen; Danqing Yi; Bin Wang; Huiqun Liu; Chunping Wu

doi:10.1016/j.corsci.2015.11.007

journal article Feb 01, 2016

Mechanism of the early stages of oxidation of WC–Co cemented carbides

Liyong Chen Danqing Yi Bin Wang

Huiqun Liu Chunping Wu

Corrosion Science Vol. 103 pp. 75-87 · Elsevier BV

View at Publisher Save 10.1016/j.corsci.2015.11.007

Topics

No keywords indexed for this article. Browse by subject →

References

53

[1]

Bhaumik "Oxidation behaviour of hard and binder phase modified WC–10Co cemented carbides" J. Mater. Sci. Lett. (1992) 10.1007/bf00729663

[2]

Lofaj "Kinetics of WC–Co oxidation accompanied by swelling" J. Mater. Sci. (1995) 10.1007/bf00351615

[3]

Basu "Oxidation behavior of WC–Co" Mater. Sci. Eng. A—Struct. (1996) 10.1016/0921-5093(95)10145-4

[4]

Voitovich "Oxidation of WC–Co, WC–Ni and WC–Co–Ni hard metals in the temperature range 500–800°C" Int. J. Refract. Met. Hard Mater. (1996) 10.1016/0263-4368(96)00009-1

[5]

Kindermann "High-temperature fatigue of cemented carbides under cyclic loads" Int. J. Refract. Met. Hard Mater. (1999) 10.1016/s0263-4368(99)00014-1

[6]

Majumdar "Finite element analysis of temperature rise in metal cutting processes" Appl. Therm. Eng. (2005) 10.1016/j.applthermaleng.2005.01.006

[7]

Pujana "Radiation thermometry applied to temperature measurement in the cutting process" Meas. Sci. Technol. (2007) 10.1088/0957-0233/18/11/022

[8]

Sutter "Temperature fields in a chip during high-speed orthogonal cutting—an experimental investigation" Int. J. Mach. Tools Manuf. (2007) 10.1016/j.ijmachtools.2006.11.012

[9]

Barbatti "Influence of WC replacement by TiC and (Ta, Nb)C on the oxidation resistance of Co-based cemented carbides" Int. J. Refract. Met. Hard Mater. (2009) 10.1016/j.ijrmhm.2008.12.009

[10]

del Campo "Kinetics inversion in isothermal oxidation of uncoated WC-based carbides between 450 and 800°C" Corros. Sci. (2009) 10.1016/j.corsci.2008.12.022

[11]

Aristizabal "Comparison of the oxidation behaviour of WC–Co and WC–Ni–Co–Cr cemented carbides" Corros. Sci. (2011) 10.1016/j.corsci.2011.05.006

[12]

Courbon "On the existence of a thermal contact resistance at the tool-chip interface in dry cutting of AISI 1045: formation mechanisms and influence on the cutting process" Appl. Therm. Eng. (2013) 10.1016/j.applthermaleng.2012.06.047

[13]

Acchar "Strength degradation of a tungsten carbide–cobalt composite at elevated temperatures" Mater. Charact. (1999) 10.1016/s1044-5803(98)00056-4

[14]

Casas "Oxidation-induced strength degradation of WC–Co hardmetals" Int. J. Refract. Met. Hard Mater. (2001) 10.1016/s0263-4368(01)00033-6

[15]

Gu "Thermal oxidation behavior of WC–Co hard metal machining tool tip scraps" J. Mater. Process. Technol. (2012) 10.1016/j.jmatprotec.2012.01.009

[16]

Tumanov "Effects of thermal oxidation and vibratory treatments upon the strength characteristics of low-cobalt WC–Co hard alloys" Poroshkovaya Metallurgiya (1975)

[17]

Huang "Effect of temperature on bending strength and failure mechanism of cemented carbide" Trans. Mater. Heat Treat. (2007)

[18]

Shi "Oxidation of ultrafine-cemented carbide prepared from nanocrystalline WC–10Co composite powder" Ceram. Int. (2008) 10.1016/j.ceramint.2007.07.029

[19]

Kieffer "Über das Zunderverhalten und den oxydationsmechanismus warm- und zunder-fester Hartlegierungen, insbesondere solcher auf Titancarbid-Basis" Z. Anorg. Chem. (1950) 10.1002/zaac.19502620129

[20]

Aristizabal "Liquid phase sintering and oxidation resistance of WC–Ni–Co–Cr cemented carbides" Int. J. Refract. Met. Hard Mater. (2010) 10.1016/j.ijrmhm.2010.02.010

[21]

Chen "Non-isothermal oxidation kinetics of WC–6Co cemented carbides in air" Int. J. Refract. Met. Hard Mater. (2013) 10.1016/j.ijrmhm.2013.02.003

[22]

Aly "Kinetics of isothermal oxidation of WC–20Co hot-pressed compacts in air" J. Therm. Anal. Calorim. (2014) 10.1007/s10973-014-4044-4

[23]

Chen "The selective oxidation behaviour of WC–Co cemented carbides during the early oxidation stage" Corros. Sci. (2015) 10.1016/j.corsci.2015.02.033

[24]

Huang "Oxidation of WC–TiC–TaC–Co hard materials at relatively low temperature" Int. J. Refract. Met. Hard Mater. (2015) 10.1016/j.ijrmhm.2014.08.002

[25]

Auinger "Early stages of oxidation observed by in situ thermogravimetry in low pressure atmospheres" Corros. Sci. (2014) 10.1016/j.corsci.2014.05.010

[26]

Auinger "Modelling and experiment of selective oxidation and nitridation of binary model alloys at 700°C—the systems Fe, 1wt.%{Al, Cr, Mn, Si}" Corros. Sci. (2015) 10.1016/j.corsci.2014.06.049

[27]

Bott "Theoretical and experimental analysis of selective oxide and nitride formation in Fe–Al alloys" Corros. Sci. (2015) 10.1016/j.corsci.2014.10.024

[28]

Zhang "Effect of yttrium and aluminum additions on isothermal oxidation behavior of Tribaloy T-700 alloys" Corros. Sci. (2014) 10.1016/j.corsci.2014.07.053

[29]

Wang "The effect of alloyed nickel on the short-term high temperature oxidation behaviour of Co–Re–Cr-based alloys" Corros. Sci. (2015) 10.1016/j.corsci.2015.01.004

[30]

Ollivier-Leduc "Nucleation and growth of selective oxide particles on ferritic steel" Corros. Sci. (2010) 10.1016/j.corsci.2010.03.030

[31]

Ollivier-Leduc "Study of selective oxidation by means of glow discharge optical emission spectroscopy" Corros. Sci. (2011) 10.1016/j.corsci.2011.01.012

[32]

Sagl "The role of surface oxides on annealed high-strength steels in hot-dip galvanizing" Corros. Sci. (2013) 10.1016/j.corsci.2013.01.039

[33]

Jiang (2010)

[34]

Exner "Qualitative and quantitative surface microscopy" (1996)

[35]

Polini "Diamond nucleation from the gas phase onto cold-worked Co-cemented tungsten carbide" Diam. Relat. Mater. (2003) 10.1016/s0925-9635(02)00285-6

[36]

Ross "The relation of surface structure to the electrocatalytic activity of tungsten carbide" J. Catal. (1977) 10.1016/0021-9517(77)90076-8

[37]

Nakazawa "Surface composition of prepared tungsten carbide and its catalytic activity" Appl. Surf. Sci. (1985) 10.1016/0169-4332(85)90213-2

[38]

Nakazawa "XPS study of WC formation process" Appl. Surf. Sci. (1986) 10.1016/0169-4332(86)90097-8

[39]

Xue "Low-pressure chemical vapor deposition of tungsten carbide (WC) thin films" Chem. Mater. (1991) 10.1021/cm00015a004

[40]

Nikiforov "Electronic structure of nonstoichiometric transition metal carbides: a comparison of theory with XPS, EELS and XANES spectra" J. Electron Spectrosc. (1994) 10.1016/0368-2048(94)02119-8

[41]

Katrib "The multi-surface structure and catalytic properties of partially reduced WO3, WO2 and WC+O2 or W+O2 as characterized by XPS" J. Electron Spectrosc. (1995) 10.1016/0368-2048(95)02451-4

[42]

Muller "Catalytic activity and XPS surface determination of tungsten carbide for hydrocarbon reforming. Influence of the oxygen" Catal. Lett. (1995) 10.1007/bf00807005

[43]

Carson "Epitaxial growth of Co3O4 on CoO(100)" J. Vac. Sci. Technol. A (1996) 10.1116/1.580310

[44]

Warren "Oxidation of tungsten and tungsten carbide in dry and humid atmospheres" Int. J. Refract. Met. Hard Mater. (1996) 10.1016/s0263-4368(96)00027-3

[45]

Khyzhun "XPS, XES and XAS studies of the electronic structure of tungsten oxides" J. Alloys Compd. (2000) 10.1016/s0925-8388(00)00697-6

[46]

Luthin "Carbon films and carbide formation on tungsten" Surf. Sci. (2000) 10.1016/s0039-6028(00)00181-3

[47]

Luthin "Influence of oxygen on the carbide formation on tungsten" J. Nucl. Mater. (2001) 10.1016/s0022-3115(00)00429-3

[48]

Zellner "Synthesis, characterization and surface reactivity of tungsten carbide (WC) PVD films" Surf. Sci. (2004) 10.1016/j.susc.2004.07.029

[49]

Maffeis "STM and XPS characterisation of vacuum annealed nanocrystalline WO3 films" Surf. Sci. (2007) 10.1016/j.susc.2007.08.009

[50]

Rajagopal "Hydrothermal synthesis and electronic properties of FeWO4 and CoWO4 nanostructures" J. Alloys Compd. (2010) 10.1016/j.jallcom.2009.12.099

Showing 50 of 53 references

Cited By

110

Effects of TiC0.4 on microstructure and properties of WC composites

Qin Zou, Zijian Jiao · 2022

Journal of Alloys and Compounds

Metrics

110

Citations

53

References

Details

Published: Feb 01, 2016
Vol/Issue: 103
Pages: 75-87
License: View

Authors

Institute of Soil Fertilizer and Agricultural Water Saving, Xinjiang Academy of Agricultural Sciences, Urumqi 830091, China

Funding

National Natural Science Foundation of China

Cite This Article

Liyong Chen, Danqing Yi, Bin Wang, et al. (2016). Mechanism of the early stages of oxidation of WC–Co cemented carbides. Corrosion Science, 103, 75-87. https://doi.org/10.1016/j.corsci.2015.11.007

Mechanism of the early stages of oxidation of WC–Co cemented carbides

You May Also Like