Additive manufactured corrosion-resistant SS316L/IN625 functionally graded multi-material in hydrofluoric acid (HF) environment

Tammas-Williams "Design for additive manufacturing with site-specific properties in metals and alloys" Scr. Mater. (2017) 10.1016/j.scriptamat.2016.10.030

[3]

Piscopo "Current research and industrial application of laser powder directed energy deposition" Int. J. Adv. Manuf. Technol. (2022) 10.1007/s00170-021-08596-w

[4]

Feenstra "Critical review of the state of the art in multi-material fabrication via directed energy deposition" Curr. Opin. Solid State Mater. Sci. (2021) 10.1016/j.cossms.2021.100924

[5]

Onuike "Additive manufacturing of Inconel718 – Ti6Al4V bimetallic structures" Addit. Manuf. (2018)

[6]

Li "Fabrication and characterization of a functionally graded material from Ti-6Al-4V to SS316 by laser metal deposition" Addit. Manuf. (2017)

[7]

Chen "Interfacial microstructure and mechanical properties of 316L/CuSn10 multi-material bimetallic structure fabricated by selective laser melting" Mater. Sci. Eng. A (2019) 10.1016/j.msea.2019.02.097

[8]

Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: Characterization and thermodynamic modeling

Beth E. Carroll, Richard A. Otis, John Paul Borgonia et al.

Acta Materialia 2016 10.1016/j.actamat.2016.02.019

[9]

Chen "Development and characterization of 316L/Inconel625 functionally graded material fabricated by laser direct metal deposition" Opt. Laser Technol. (2020) 10.1016/j.optlastec.2019.105916

[10]

Wang "A novel process parameter screening strategy by comprehensively consideration of powder separation, defects and power consumption when fabricating FGM using laser metal deposition" J. Clean. Prod. (2021) 10.1016/j.jclepro.2020.123274

[11]

A Review on Functionally Graded Materials and Structures via Additive Manufacturing: From Multi‐Scale Design to Versatile Functional Properties

Yan Li, Zhanyong Feng, Liang Hao et al.

Advanced Materials Technologies 2020 10.1002/admt.201900981

[12]

Lefky "Impact of compositional gradients on selectivity of dissolvable support structures for directed energy deposited metals" Acta Mater. (2018) 10.1016/j.actamat.2018.04.009

[13]

Tang "Electrochemical and localized corrosion behavior of 316L SS/copper/316L SS sandwich composite in chloride-containing environment" Corros. Sci. (2022) 10.1016/j.corsci.2022.110719

[14]

Zhou "Sulphide stress cracking behaviour of the dissimilar metal welded joint of X60 pipeline steel and Inconel 625 alloy" Corros. Sci. (2016) 10.1016/j.corsci.2016.04.044

[15]

Sokkalingam "Additive manufacturing of CoCrFeMnNi high-entropy alloy/AISI 316L stainless steel bimetallic structures" Adv. Eng. Mater. (2023) 10.1002/adem.202200341

[16]

Yu "Microstructure and corrosion behaviour of 316L-IN625 functionally graded materials via laser metal deposition" Corros. Sci. (2021) 10.1016/j.corsci.2021.109876

[17]

Lefky "Impact of compositional gradients on selectivity of dissolvable support structures for directed energy deposited metals" Acta Mater. (2018) 10.1016/j.actamat.2018.04.009

[18]

Effects of heat treatment on hot corrosion behavior of directed energy deposited In718/316L functionally graded material

Gang Xu, Runbao Wu, Kaiyu Luo et al.

Corrosion Science 2022 10.1016/j.corsci.2021.110068

[19]

Dai "Pits formation and stress corrosion cracking behavior of Q345R in hydrofluoric acid" Corros. Sci. (2020) 10.1016/j.corsci.2020.108443

[20]

Tavener "Can fluorine chemistry be green chemistry?" J. Fluor. Chem. (2003) 10.1016/s0022-1139(03)00140-4

[21]

Guo "The deterioration effects of corrosion product deposition on Ni-Cu alloy in hydrofluoric acid vapor phase" Corros. Sci. (2023) 10.1016/j.corsci.2023.111256

[22]

Dai "Stress corrosion cracking behavior of 316L SS in HF vapor environment based on corrosion degradation as a precursor" Corros. Sci. (2022) 10.1016/j.corsci.2022.110615

[23]

Oshima "Efforts to save nickel in austenitic stainless steels" ISIJ Int (2007) 10.2355/isijinternational.47.359

[24]

Rebak "Corrosion behavior of nickel alloys in wet hydrofluoric acid" Mater. Corros. (2001) 10.1002/1521-4176(200104)52:4<289::aid-maco289>3.0.co;2-0

[25]

Pawel "Corrosion of high-alloy materials in aqueous hydrofluoric acid environments" Corrosion (1994) 10.5006/1.3293488

[26]

J01 Committee, Guide for Laboratory Immersion Corrosion Testing of Metals, ASTM International, 〈https://doi.org/10.1520/G0031-21〉. 10.1520/g0031-21

[27]

Song "Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition" Addit. Manuf. (2022)

[28]

Weng "A novel strategy to fabricate thin 316L stainless steel rods by continuous directed energy deposition in Z direction" Addit. Manuf. (2019)

[29]

Saboori "An investigation on the effect of powder recycling on the microstructure and mechanical properties of AISI 316L produced by Directed Energy Deposition" Mater. Sci. Eng. A (2019) 10.1016/j.msea.2019.138360

[30]

Tong "Microstructures and mechanical properties of crack-free 316L stainless steel and Inconel 625 joint by using laser engineered net shaping" Opt. Laser Technol. (2022) 10.1016/j.optlastec.2022.108357

[31]

Li "A functionally graded material design from stainless steel to Ni-based superalloy by laser metal deposition coupled with thermodynamic prediction" Mater. Des. (2022) 10.1016/j.matdes.2022.110612

[32]

Zhang "Improved corrosion resistance of super austenite stainless steel by B-induced nucleation of Laves phase" Corros. Sci. (2023) 10.1016/j.corsci.2023.110974

[33]

Volpato "A comprehensive literature review on laser powder bed fusion of Inconel superalloys" Addit. Manuf. (2022)

[34]

Jinoop "Laser-assisted directed energy deposition of nickel super alloys: A review" Proc. Inst. Mech. Eng. Part J. Mater. Des. Appl. (2019)

[35]

Li "Controlling the columnar-to-equiaxed transition during directed energy deposition of Inconel 625" Addit. Manuf. (2022)

[36]

Thompson "An overview of direct laser deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics" Addit. Manuf. (2015)

[37]

Kim "Selective compositional range exclusion via directed energy deposition to produce a defect-free Inconel718/SS316L functionally graded material" Addit. Manuf. (2021)

[38]

P. Crook, N. Meck, R.B. Rebak, The Influence of composition upon surface degradation and stress corrosion cracking of the Ni-Cr-Mo alloys in wet hydrofluoric acid, in: 2007: p. NACE-07481. 10.5006/c2007-07481

[39]

Guo "The deterioration effects of corrosion product deposition on Ni-Cu alloy in hydrofluoric acid vapor phase" Corros. Sci. (2023) 10.1016/j.corsci.2023.111256

[40]

Luo "Hot corrosion behaviors of directed energy deposited Inconel 718/Haynes 25 functionally graded material at 700 °C and 900 °C" Corros. Sci. (2022) 10.1016/j.corsci.2021.110040

[41]

Guo "Corrosion mechanisms of nickel-based alloys in chloride-containing hydrofluoric acid solution" Eng. Fail. Anal. (2022) 10.1016/j.engfailanal.2022.106580

[42]

Dai "Revealing the effect of heat treatment on stress corrosion cracking behavior of Monel 400 alloy in hydrofluoric acid vapor environment" Corros. Sci. (2023)

[43]

Zhang "Galvanic corrosion behavior of dissimilar casing steels in high sulfur-containing gas wells" Eng. Fail. Anal. (2020) 10.1016/j.engfailanal.2019.104320

[44]

Okonkwo "A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld" J. Mater. Sci. Technol. (2021) 10.1016/j.jmst.2020.10.044

[45]

Li "Evading the strength-ductility trade-off dilemma in steel-nickel heterostructured material by bionic crossed-lamellar structures" Virtual Phys. Prototyp. (2023) 10.1080/17452759.2023.2266640

[46]

Xu "Stress-assisted oxidation behaviour of Inconel52M/316 austenitic stainless-steel dissimilar weld joints in a simulated pressurised water reactor" Nucl. Eng. Technol. (2022) 10.1016/j.net.2022.05.004

[47]

Okonkwo "Microscale investigation of the correlation between microstructure and galvanic corrosion of low alloy steel A508 and its welded 309/308L stainless steel overlayer" Corros. Sci. (2019) 10.1016/j.corsci.2019.03.027

[48]

Lai "Local electrochemical properties of fusion boundary region in SA508–309 L/308L overlay welded joint" Corros. Sci. (2019) 10.1016/j.corsci.2019.04.021

[49]

Wang "Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design" Corros. Sci. (2022) 10.1016/j.corsci.2022.110761

[50]

Chan "Insights on the corrosion thermodynamics of chromium in molten LiF-NaF-KF eutectic salts" Npj Mater. Degrad. (2022)

Showing 50 of 60 references

Cited By

17

Interfacial characteristics and properties of SS 316L/IN718 gradient materials fabricated by laser directed energy deposition under compositional gradient control

Weiwei Liu, Zongyu Ma · 2026

Journal of Alloys and Compounds

Metrics

17

Citations

60

References

Details

Published: Apr 01, 2024
Vol/Issue: 230
Pages: 111926
License: View

Authors

Britton Chance Center and MOE Key Laboratory for Biomedical Photonics, Wuhan National Laboratory for Optoelectronics; Huazhong University of Science and Technology

Union Hospital

Shenzhen Metro (China)

Funding

National Natural Science Foundation of China Award: 52075368

National Key Research and Development Program of China Award: 2022YFC3004501

Cite This Article

Shuyao Zhang, Hailong Dai, Yajing Li, et al. (2024). Additive manufactured corrosion-resistant SS316L/IN625 functionally graded multi-material in hydrofluoric acid (HF) environment. Corrosion Science, 230, 111926. https://doi.org/10.1016/j.corsci.2024.111926

Additive manufactured corrosion-resistant SS316L/IN625 functionally graded multi-material in hydrofluoric acid (HF) environment

You May Also Like