A 3D rendering-assisted quantitative evaluation of stripping in recycled asphalt materials

Liu "Effect of RAP’s preheating temperature on the secondary aging and performance of recycled asphalt mixtures containing high RAP content" Constr. Build. Mater. (2024) 10.1016/j.conbuildmat.2023.134719

[2]

Zhang "Research on macro and micro performance degradation of hot in-place recycled asphalt mixtures with high RAP contents" Case Stud. Constr. Mater. (2025)

[3]

Yu "Long-term performance of recycled asphalt mixtures containing high RAP and RAS" J. Road. Eng. (2024) 10.1016/j.jreng.2024.01.003

[4]

Suzuki "Evaluation of recycled asphalt mixtures with different RAP contents and the effect of recycling agent" Road. Mater. Pavement Des. (2024) 10.1080/14680629.2023.2191739

[5]

Barraj "Uncertainty analysis for the dynamic modulus of recycled asphalt mixtures using unclassified fractionated RAP materials" Constr. Build. Mater. (2024) 10.1016/j.conbuildmat.2024.135721

[6]

Nouali "Effect of aging kinetics on the fatigue behavior of asphalt mixtures incorporating various RAP contents" Transp. Eng. (2025) 10.1016/j.treng.2025.100312

[7]

Costa "Influence of aging, RAP content, and recycling agent on the performance of asphalt mixtures" Environ. Sci. Pollut. Res (2024) 10.1007/s11356-023-31263-4

[8]

Yao "Blending behavior of reclaimed asphalt and virgin asphalt in recycled asphalt mixtures: a comprehensive analysis on material composition and mixing process" Constr. Build. Mater. (2025) 10.1016/j.conbuildmat.2025.140229

[9]

Imaninasab "Integrated performance evaluation of asphalt mixtures with very high reclaimed asphalt pavement (RAP) content" Constr. Build. Mater. (2022) 10.1016/j.conbuildmat.2022.128607

[10]

Chen "Effects of rejuvenator on the properties of hot-mix recycled epoxy asphalt binder doped with RAP" J. Mater. Civ. Eng. (2025) 10.1061/jmcee7.mteng-18810

[11]

Wan "Morphological characteristics of low-asphalt RAP and influence of its reaction product during combustion heating on regenerated asphalt" Constr. Build. Mater. (2024) 10.1016/j.conbuildmat.2024.138971

[12]

Dong "Regeneration mechanisms of aged SBS modified asphalt from RAP materials: molecule structure, morphology, phase transition, and interface adhesion characteristics" Constr. Build. Mater. (2023) 10.1016/j.conbuildmat.2023.131689

[13]

Fang "Development of bioregenerant and its potential application: investigation for regeneration of RAP materials" J. Mater. Civ. Eng. (2024) 10.1061/jmcee7.mteng-17881

[14]

Cavalli "Bio-based rejuvenators in asphalt pavements: a comprehensive review and analytical study" J. Road. Eng. (2024) 10.1016/j.jreng.2024.04.007

[15]

Musco "Use of bio-based products towards more sustainable road paving binders: a state-of-the-art review" J. Road. Eng. (2024) 10.1016/j.jreng.2024.04.002

[16]

El-Shorbagy "Investigation of waste oils as rejuvenators of aged bitumen for sustainable pavement" Constr. Build. Mater. (2019) 10.1016/j.conbuildmat.2019.05.180

[17]

Yi "Optimization design and performance evaluation of a novel asphalt rejuvenator" Front. Mater. (2022) 10.3389/fmats.2022.1081858

[18]

Baghaee Moghaddam "The use of rejuvenating agents in production of recycled hot mix asphalt: a systematic review" Constr. Build. Mater. (2016) 10.1016/j.conbuildmat.2016.04.015

[19]

Yang "Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources" Constr. Build. Mater. (2014) 10.1016/j.conbuildmat.2013.11.017

[20]

Zadshir "Investigating bio-rejuvenation mechanisms in asphalt binder via laboratory experiments and molecular dynamics simulation" Constr. Build. Mater. (2018) 10.1016/j.conbuildmat.2018.09.137

[21]

C.L. Zhou, C.C. Zheng, D.X. Cheng, Evaluation of environmental pollution from asphalt recycling technology, in: 2014 3rd International Conference on Intelligent System and Applied Material, GSAM 2014, January 18, 2014 - January 19, 2014, Trans Tech Publications, Taiyuan, China, 2014: pp. 482–485. https://doi.org/10.4028/www.scientific.net/AMR.898.482. 10.4028/www.scientific.net/amr.898.482

[22]

Nogueira "Rheological evaluation of cotton seed oil fatty amides as a rejuvenating agent for RAP oxidized asphalts" Constr. Build. Mater. (2019) 10.1016/j.conbuildmat.2019.06.128

[23]

Han "Determination of surface energy parameters of hydrophilic porous membranes via a corrected contact angle approach" Langmuir (2019) 10.1021/acs.langmuir.9b02508

[24]

Zhou "Molecular dynamics simulation of the interfacial interaction mechanism between functional groups on graphene-based two-dimensional matrix and calcium silicate hydrate" Constr. Build. Mater. (2021) 10.1016/j.conbuildmat.2021.122804

[25]

Yao "Development and optimization of object detection technology in pavement engineering: a literature review" J. Road. Eng. (2024) 10.1016/j.jreng.2024.01.006

[26]

Zhang "Intelligent pavement condition survey: overview of current researches and practices" J. Road. Eng. (2024) 10.1016/j.jreng.2024.04.003

[27]

Cavalli "Review of advanced road materials, structures, equipment, and detection technologies" J. Road. Eng. (2023) 10.1016/j.jreng.2023.12.001

[28]

Caputo "A comparison and correlation between bitumen adhesion evaluation test methods, boiling and contact angle tests" Int. J. Adhes. Adhes. (2020) 10.1016/j.ijadhadh.2020.102680

[29]

Esmaeili "Stripping propensity detection of HMA Mixes: with focus on image processing method" Constr. Build. Mater. (2022) 10.1016/j.conbuildmat.2022.129022

[30]

Arbabpour Bidgoli "Introducing adhesion-cohesion index to evaluate moisture susceptibility of asphalt mixtures using a registration image-processing method" J. Mater. Civ. Eng. (2020) 10.1061/(asce)mt.1943-5533.0003477

[31]

ASTM International, ASTM D1754/D1754M-20: Standard test method for effects of heat and air on asphaltic materials (Thin-Film Oven Test), (2020).

[32]

ASTM International, ASTM D6521-22: Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV), (2022).

[33]

Zhang "Effects of recycling agents (RAs) on rutting resistance and moisture susceptibility of mixtures with high RAP/RAS content" Constr. Build. Mater. (2021) 10.1016/j.conbuildmat.2020.121369

[34]

ASTM International, ASTM D5/D5M-20: Standard test method for penetration of bituminous materials, (2020).

[35]

ASTM International, ASTM D113/D113M-17(2023) e1: Standard test method for ductility of asphalt materials, (2023).

[36]

ASTM International, ASTM D36/D36M-14(2020): Standard test method for softening point of bitumen (Ring-and-Ball Apparatus), (2020).

[37]

ASTM International, ASTM D4402/D4402M-23: Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer, (2023).

[38]

Zhang "Adhesion characteristics of montmorillonite modified asphalt unveiled by surface free energy and AFM" Int. J. Adhes. Adhes. (2024) 10.1016/j.ijadhadh.2024.103699

[39]

Li "Quantitative Analysis of Adhesion Characteristics between Crumb Rubber Modified Asphalt and Aggregate Using Surface Free Energy Theory" Materials (2022) 10.3390/ma15165735

[40]

Zhao "Improvements on the use of GPC to measure large-size microstructures in aged asphalt binders" Int. J. Pavement Eng. (2022) 10.1080/10298436.2020.1852561

[41]

ASTM International, ASTM D7643-22: Standard practice for determining the continuous grading temperatures and continuous grades for PG graded asphalt binders, (2022).

[42]

ASTM International, ASTM D6648-25: Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), (2025).

[43]

Young "An essay on the cohesion of fluids" Philos. Trans. R. Soc. Lond. (1805)

[44]

Estimation of the surface free energy of polymers

D. K. Owens, R. C. Wendt

Journal of Applied Polymer Science 1969 10.1002/app.1969.070130815

[45]

Yu "Adhesion Characteristics of Graphene-Modified Asphalt Using Surface-Free Energy Method" J. Mater. Civ. Eng. (2023) 10.1061/jmcee7.mteng-15104

[46]

Good "The Modern Theory of Contact Angles and the Hydrogen Bond Components of Surface Energies" (1992)

[47]

Ju "Rheological and microscopic characterization and correlation analysis of asphalt under high-intensity ultraviolet radiation" Case Stud. Constr. Mater. (2024)

[48]

Jusner "Protocol for characterizing the molar mass distribution and oxidized functionality profiles of aged transformer papers by gel permeation chromatography (GPC)" Cellulose (2022) 10.1007/s10570-022-04464-2

[49]

Fini "Role of chemical composition of recycling agents in their interactions with oxidized asphaltene molecules" J. Mater. Civ. Eng. (2020) 10.1061/(asce)mt.1943-5533.0003352

Metrics

0

Citations

49

References

Details

Published: Jul 01, 2026
Vol/Issue: 24
Pages: e05854
License: View

Authors

Soochow University

FU Berlin 1 , Arnimallee 6, 14195 Berlin, Germany

State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, Beijing, China

Vacuum Interconnected Nanotech Workstation Suzhou Institute of Nano‐Tech and NanoBionics Chinese Academy of Sciences Suzhou 215123 China

Funding

National Natural Science Foundation of China Award: 52578521

State Key Laboratory of Subtropical Building Science

Cite This Article

Yuan Zhang, Hao Wu, Jiangmiao Yu, et al. (2026). A 3D rendering-assisted quantitative evaluation of stripping in recycled asphalt materials. Case Studies in Construction Materials, 24, e05854. https://doi.org/10.1016/j.cscm.2026.e05854

A 3D rendering-assisted quantitative evaluation of stripping in recycled asphalt materials

You May Also Like