Prestressed cold-formed steel beams: Concept and mechanical behaviour

Nicolas Hadjipantelis; Leroy Gardner; M. Ahmer Wadee

doi:10.1016/j.engstruct.2018.06.027

journal article Oct 01, 2018

Prestressed cold-formed steel beams: Concept and mechanical behaviour

Nicolas Hadjipantelis

Leroy Gardner

M. Ahmer Wadee

Engineering Structures Vol. 172 pp. 1057-1072 · Elsevier BV

View at Publisher Save 10.1016/j.engstruct.2018.06.027

Topics

No keywords indexed for this article. Browse by subject →

References

61

[1]

Magnel "Prestressed steel structures" Struct Eng (1950)

[2]

Hoadley "Development and use of prestressed steel flexural members: Part 2 – Prestressing by means of high strength steel wires or bars. Subcommittee 3 on Prestressed Steel of Joint ASCE-AASHO Committee" J Struct Div ASCE (1968)

[3]

Troitsky (1990)

[4]

Belletti "Behaviour of prestressed steel beams" J Struct Eng ASCE (2010) 10.1061/(asce)st.1943-541x.0000208

[5]

Kambal "Theoretical and experimental study on flexural behavior of prestressed steel plate girders" J Constr Steel Res (2018) 10.1016/j.jcsr.2017.12.007

[6]

Hoadley "Behavior of prestressed composite steel beams" J Struct Div ASCE (1963) 10.1061/jsdeag.0000930

[7]

Troitsky "Pre-tensioned and posttensioned composite girders" J Struct Eng ASCE (1990) 10.1061/(asce)0733-9445(1989)115:12(3142)

[8]

Saadatmanesh "Experimental study of prestressed composite beams" J Struct Eng ASCE (1989) 10.1061/(asce)0733-9445(1989)115:9(2348)

[9]

Ayyub "Prestressed composite girders under positive moment" J Struct Eng ASCE (1990) 10.1061/(asce)0733-9445(1990)116:11(2931)

[10]

Tong "Parametric study of continuous prestressed composite girders" J Struct Eng ASCE (1992) 10.1061/(asce)0733-9445(1992)118:1(186)

[11]

Lorenc "Behavior of composite beams prestressed with external tendons: Experimental study" J Constr Steel Res (2006) 10.1016/j.jcsr.2006.01.007

[12]

Lou "Numerical modeling of externally prestressed steel–concrete composite beams" J Constr Steel Res (2016) 10.1016/j.jcsr.2016.02.008

[13]

Ayyub "Posttensioned trusses: analysis and design" J Struct Eng ASCE (1990) 10.1061/(asce)0733-9445(1990)116:6(1491)

[14]

Ellen ME, Gosaye J, Gardner L, Wadee MA. Design and construction of long-span post-tensioned tubular steel structures. In: Tubular Structures XIV – proceedings of the 14th international symposium on tubular structures; 2012. p. 687–93. 10.1201/b13139-98

[15]

Gosaye "Tensile performance of prestressed steel elements" Eng Struct (2014) 10.1016/j.engstruct.2014.08.009

[16]

Gosaye "Compressive behaviour and design of prestressed steel elements" Structures (2016) 10.1016/j.istruc.2015.09.001

[17]

Wang "Axial behaviour of prestressed high strength steel tubular members" J Constr Steel Res (2017) 10.1016/j.jcsr.2017.03.002

[18]

Saito "Buckling behaviour of prestressed steel stayed columns with imperfections and stress limitation" Eng Struct (2009) 10.1016/j.engstruct.2008.07.006

[19]

Saito "Optimal prestressing and configuration of stayed columns" Struct Build ICE (2010) 10.1680/stbu.2010.163.5.343

[20]

Osofero "Experimental study of critical and post-buckling behaviour of prestressed stayed columns" J Constr Steel Res (2012) 10.1016/j.jcsr.2012.07.013

[21]

Wadee "Design of prestressed stayed columns" J Constr Steel Res (2013) 10.1016/j.jcsr.2012.09.021

[22]

Yu "Mode interaction in triple-bay prestressed stayed columns" Int J Non-Linear Mech (2017) 10.1016/j.ijnonlinmec.2016.10.012

[23]

Clarke Finite-element nonlinear analysis of stressed-arch frames (1991)

[24]

Gosaye J. Behaviour and design of prestressed steel structures [Ph.D. thesis]. Imperial College London; 2015. 10.1016/j.istruc.2015.09.001

[25]

Experimental studies on the shear behaviour and strength of LiteSteel beams

Poologanathan Keerthan, Mahen Mahendran

Engineering Structures 2010 10.1016/j.engstruct.2010.06.012

[26]

Anapayan "Numerical modelling and design of LiteSteel Beams subject to lateral buckling" J Constr Steel Res (2012) 10.1016/j.jcsr.2011.08.016

[27]

Torabian S, Zheng B, Schafer BW. Development of a new beam-column design method for cold formed steel lipped channel members. In: Twenty-second international specialty conference on cold-formed steel structures; 2014.

[28]

Torabian "Experimental response of cold-formed steel lipped channel beam-columns" Thin-Walled Struct (2015) 10.1016/j.tws.2014.12.003

[29]

Hoadley PG. An analytical study of the behavior of prestressed steel beams [Ph.D. thesis]. University of Illinois; 1961.

[30]

Anapayan "Section moment capacity tests of LiteSteel beams" Thin-Walled Struct (2011) 10.1016/j.tws.2010.12.004

[31]

Naaman "A new methodology for the analysis of beams prestressed with external or unbonded tendons" External Prestress Bridges (1990)

[32]

AISI S100-16. North American specification for the design of cold-formed steel structural members; 2016.

[33]

EN 1993-1-3. Eurocode 3: design of steel structures – Part 1-3: General rules – Supplementary rules for cold-formed members and sheeting; 2006.

[34]

Review: The Direct Strength Method of cold-formed steel member design

B.W. Schafer

Journal of Constructional Steel Research 2008 10.1016/j.jcsr.2008.01.022

[35]

Torabian "Experimental response of cold-formed steel Zee-section beam-columns" Thin-Walled Struct (2016) 10.1016/j.tws.2015.10.016

[36]

Torabian S, Zheng B, Shifferaw Y, Schafer BW. Direct strength prediction of cold-formed steel beam-columns. Research report RP16-3, AISI 2016.

[37]

Von Kármán "The strength of thin plates in compression" Trans ASME (1932)

[38]

Li Z, Schafer BW. Buckling analysis of cold-formed steel members with general boundary conditions using CUFSM: Conventional and constrained finite strip methods. In: Proceedings of the twentieth international specialty conference on cold-formed steel structures. Missouri, USA, November 3-4; 2010.

[39]

Ádány S, Beregszászi Z. Local and distortional buckling of thin-walled members – numerical study to compare conventional and constrained finite strip methods. In: Fifth international conference on thin-walled structures; 2008.

[40]

Li "Review: Constrained finite strip method developments and applications in cold-formed steel design" Thin-Walled Struct (2014) 10.1016/j.tws.2013.09.004

[41]

Li "Application of the finite strip method in cold-formed steel member design" J Constr Steel Res (2010) 10.1016/j.jcsr.2010.04.001

[42]

ABAQUS. Dassault Systemes Simulia Corp. Abaqus v 6.14-2 Analysis User’s Guide – Online Documentation; 2014.

[43]

Young "Numerical investigation of channel columns with complex stiffeners – part II: parametric study and design" Thin-Walled Struct (2004) 10.1016/j.tws.2004.01.004

[44]

Borges Dinis "FEM-based analysis of the local-plate/distortional mode interaction in cold-formed steel lipped channel columns" Comput Struct (2007) 10.1016/j.compstruc.2007.02.013

[45]

Yu "Simulation of cold-formed steel beams in local and distortional buckling with applications to the direct strength method" J Constr Steel Res (2007) 10.1016/j.jcsr.2006.07.008

[46]

Keerthan "Numerical modeling of LiteSteel beams subject to shear" J Struct Eng ASCE (2011) 10.1061/(asce)st.1943-541x.0000391

[47]

Kyvelou "Finite element modelling of composite cold-formed steel flooring systems" Eng Struct (2018) 10.1016/j.engstruct.2017.12.024

[48]

Madrazo-Aguirre "Non-linear stability of under-deck cable-stayed bridge decks" Int J Non-Linear Mech (2015) 10.1016/j.ijnonlinmec.2015.07.001

[49]

Sarawit "The finite element method for thin-walled members-applications" Thin-Walled Struct (2003) 10.1016/s0263-8231(02)00087-3

[50]

Schafer "Computational modeling of cold-formed steel" Thin-Walled Struct (2010) 10.1016/j.tws.2010.04.008

Showing 50 of 61 references

Metrics

43

Citations

61

References

Details

Published: Oct 01, 2018
Vol/Issue: 172
Pages: 1057-1072
License: View

Authors

N

Nicolas Hadjipantelis

Funding

Imperial College London

Cite This Article

Nicolas Hadjipantelis, Leroy Gardner, M. Ahmer Wadee (2018). Prestressed cold-formed steel beams: Concept and mechanical behaviour. Engineering Structures, 172, 1057-1072. https://doi.org/10.1016/j.engstruct.2018.06.027

Prestressed cold-formed steel beams: Concept and mechanical behaviour

You May Also Like