journal article
Feb 01, 2020
The influence of cross-section variation on bending stiffness assessment in existing timber structures
Topics
No keywords indexed for this article. Browse by subject →
References
43
[1]
Arriaga "Evaluación de la capacidad portante de piezas de gruesa escuadría de madera de conifera en estructuras existentes [Evaluation of the bearing capacity of large cross-section coniferous timber in built-in structures]" Mater Construcc (2005) 10.3989/mc.2005.v55.i280.205
[2]
Arriaga "Efecto de las gemas en la resistencia a flexión de piezas enterizas de madera [The effect of wanes on the bending strength of solid timber beams]" Mater Construcc (2007) 10.3989/mc.2007.v57.i288.65
[3]
Esteban "The effect of fissures on the strength of structural timber" Mater Construcc (2010) 10.3989/mc.2010.48208
[4]
Tannert T, Kasal B, Anthony RW. RILEM TC 215 In-situ assessment of structural timber: Report on activities and application of assessment methods. In: Proceedings of 11th International conference on world conference on timber engineering, June 20-24, Riva di Garda, Italy; 2010, p. 642–7.
[5]
Riggio "Structural health assessment of historical timber structures combining non-destructive techniques: The roof of Giotto’s bell tower in Florence" Struct Control Heal Monit (2016)
[6]
Osuna-Sequera "Improving density estimation in large cross-section timber from existing structures optimizing the number of non-destructive measurements" Constr Build Mater (2019) 10.1016/j.conbuildmat.2019.03.144
[7]
Sousa "Reliability-based design of interventions in deteriorated timber structures" Int J Archit Herit (2018) 10.1080/15583058.2018.1436205
[8]
Íñiguez-González "Reference conditions and modification factors for the standardization of nondestructive variables used in the evaluation of existing timber structures" Constr Build Mater (2015) 10.1016/j.conbuildmat.2015.05.128
[9]
Vössing "Nondestructive assessment and imaging methods for internal inspection of timber. A review" Holzforschung (2018) 10.1515/hf-2017-0122
[10]
Calderoni "Experimental correlations between destructive and non-destructive tests on ancient timber elements" Eng Struct (2010) 10.1016/j.engstruct.2009.10.006
[11]
Machado "Non-destructive evaluation of the bending behaviour of in-service pine timber structural elements" Mater Struct (2011) 10.1617/s11527-010-9674-9
[12]
Anagnostopoulou "Correlating visual grading with NTD methods for assessing timber condition in historic buildings" Adv Mater Res (2013) 10.4028/www.scientific.net/amr.778.273
[13]
Sousa "Lourenço PB. Assessment of strength and stiffness variation within old timber beams" (2012)
[14]
Feio "In-situ assessment of timber structural members: Combining information from visual strength grading and NDT/SDT methods – A review" Constr Build Mater (2015) 10.1016/j.conbuildmat.2015.05.123
[15]
Morales-Conde "Evaluation of cross-sectional variation of timber bending modulus of elasticity by stress waves" Constr Build Mater (2017) 10.1016/j.conbuildmat.2016.12.188
[16]
Arriaga "Madera aserrada de gran escuadría para uso estructural y sus particularidades [Large cross-section sawn timber for structural use and its particularities]" Inf Constr (2007) 10.3989/ic.2007.v59.i506.505
[17]
AENOR standard, UNE 56544. Clasificación visual de la madera aserrada para uso estructural. Madera de coníferas [Visual grading for structural sawn timber. Coniferous timber]. Madrid, Spain: Spanish Association for Standardization UNE; 2007, p. 25.
[18]
Cavalli "MOE and MOR assessment of in service and dismantled old structural timber" Eng Struct (2016) 10.1016/j.engstruct.2016.06.054
[19]
Gomes ID, Kondis F, Sousa HS, Branco JM, Lourenço PB. Assessment and diagnosis of two collar timber trusses by means of visual grading and non-destructive tests. In: Cruz H, Saporiti Machado J, Campos Costa A, Xavier Candeias P, Ruggieri N, Man Catarino J, editors. Hist earthquake-resistant timber fram mediterr area. Switzerland: Springer Int Publ Cham, 2016, p. 311–20. https://doi.org/10.1007/978-3-319-39492-3.
10.1007/978-3-319-39492-3_26
[20]
Branco "Non-destructive assessment, full-scale load-carrying tests and local interventions on two historic timber collar roof trusses" Eng Struct (2017) 10.1016/j.engstruct.2017.02.053
[21]
Cruz "Guidelines for on-site assessment of historic timber structures" Int J Archit Herit (2015) 10.1080/15583058.2013.774070
[22]
CEN Standard. prEN 17121. Conservation of cultural heritage - Historic Timber Structures - Guidelines for the On Site Assessment. European Committee of Standardization, Brussels, Belgium; 2019 [In formal vote].
[23]
UNI standard, UNI 11119. Cultural heritage, wooden artefacts, load-bearing structures. On site inspections for the diagnosis of timber members. Milano, Italy: Ente Nazionale Italiano di Unificazione UNI; 2004, p. 14.
[24]
Stapel "Efficiency of visual strength grading of timber with respect to origin, species, cross section, and grading rules: a critical evaluation of the common standards" Holzforschung (2014) 10.1515/hf-2013-0042
[25]
Brites "Reliability analysis of a timber truss system subjected to decay" Eng Struct (2013) 10.1016/j.engstruct.2012.07.022
[26]
Sousa "Characterization of cross-sections from old chestnut beams weakened by decay" Int J Archit Herit (2014) 10.1080/15583058.2013.826303
[27]
Lourenço "In situ measured cross section geometry of old timber structures and its influence on structural safety" Mater Struct (2013) 10.1617/s11527-012-9964-5
[28]
Íñiguez-González G, Arriaga F, Osuna-Sequera C, Esteban M, Ridley-Ellis D. Nondestructive measurements in reclaimed timber from existing structures. In: Proceedings of 21th international conference on nondestructrutive testing and evaluation of wood symposium, September 24-27, Freiburg, Germany; 2019, p. 462–72.
[29]
Nevado "The percentiles ratio 20th to 5th of bending strength and stiffness distribution in the case of Spanish softwoods" Maderas-Cienc y Tecnol (2015)
[30]
Nevado MAR. Fiabilidad estructural de coníferas españolas [Structural reliability of Spanish softwoods]. Universidad Politécnica de Madrid, ETSI Montes, Forestal y del Medio Natural, Madrid, Spain; 2015, p. 212. http://oa.upm.es/39359/.
[31]
Bayón "Restauración del Real Coliseo de Carlos III, en San Lorenzo de El Escorial, Madrid-España [Restoration of the Real Coliseo de Carlos III/El Escorial/Madrid/Spain]" Inf Constr (1986) 10.3989/ic.1986.v38.i380.1750
[32]
CEN Standard. EN 408+A1:2012. Timber structures. Structural timber and glued laminated timber. Determination of some physical and mechanical properties. Brussels, Belgium: European Committee of Standardization; 2010.
[33]
CEN standard, EN 13183-1. Moisture content of a piece of sawn timber - Part 1: Determination of oven dry method. Brussels, Belgium: European Committee of Standardization; 2002.
[34]
Arriaga "Influence of length and sensor positioning on acoustic time-of-flight (ToF) measurement in structural timber" Holzforschung (2017) 10.1515/hf-2016-0214
[35]
Llana "Influence of timber moisture content on wave time-of-flight and longitudinal natural frequency in coniferous species for different instruments" Holzforschung (2018) 10.1515/hf-2017-0113
[36]
Llana "Time-of-Flight adjustment procedure for acoustic measurements in structural timber" BioResources (2016) 10.15376/biores.11.2.3303-3317
[37]
Arriaga "Influence of length on acoustic time-of-flight (ToF) measurement in built-in structures of Norway spruce timber" Holzforschung (2019) 10.1515/hf-2018-0122
[38]
Arriaga "Structural Tali timber (Erythrophleum ivorense A. Chev., Erythrophleum suaveolens Brenan.): Assessment of strength and stiffness properties using visual and ultrasonic methods" Holz Als Roh - Und Werkst (2006) 10.1007/s00107-006-0100-5
[39]
Teder "Investigation of the physical-mechanical properties of timber using ultrasound examination" J Civ Eng Manag (2012) 10.3846/13923730.2012.736233
[40]
Arriaga "Determination of the mechanical properties of radiata pine timber by means of longitudinal and transverse vibration methods" Holzforschung (2014) 10.1515/hf-2013-0087
[41]
Davison AC, Hinkley D V. Bootstrap methods and their application. Cambridge: Cambridge University Press; 1997. https://doi.org/10.2307/1271471.
10.1017/cbo9780511802843
[42]
R Development Core Team. R: A language and environment for statistical computing. R Found Stat Comput Vienna, Austria. URL Http//www.R-Project.Org/; 2014. https://doi.org/S0103-64402004000300015.
[43]
Cathy A, Ripley B. boot: Bootstrap R (S-Plus) functions. R package version 1.3-20. CRAN R Proj; 2017. https://doi.org/10.1093/gerona/glq232.
10.1093/gerona/glq232
Metrics
25
Citations
43
References
Details
- Published
- Feb 01, 2020
- Vol/Issue
- 204
- Pages
- 110082
- License
- View
Authors
Funding
Ministerio de Economía y Competitividad
Award: BIA 2014-55089-P
Universidad Politécnica de Madrid
Cite This Article
Carlos Osuna-Sequera, Daniel F. Llana, Guillermo Íñiguez-González, et al. (2020). The influence of cross-section variation on bending stiffness assessment in existing timber structures. Engineering Structures, 204, 110082. https://doi.org/10.1016/j.engstruct.2019.110082
Related
You May Also Like
Emerging artificial intelligence methods in structural engineering
Hadi Salehi, Rigoberto Burgueño · 2018
896 citations
Failure mode and effects analysis of RC members based on machine-learning-based SHapley Additive exPlanations (SHAP) approach
Sujith Mangalathu, Seong-Hoon Hwang · 2020
893 citations
Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS
Aikaterini S. Genikomsou, Maria Anna Polak · 2015
658 citations
Progressive collapse of multi-storey buildings due to sudden column loss — Part I: Simplified assessment framework
B.A. Izzuddin, A.G. Vlassis · 2008
639 citations
New advancements, challenges and opportunities of multi-storey modular buildings – A state-of-the-art review
Wahid Ferdous, Yu Bai · 2019
609 citations