Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)

Seungwook Seok; Ghadir Haikal; Julio A. Ramirez; Laura N. Lowes; Jeehee Lim

doi:10.1016/j.engstruct.2020.110984

journal article Oct 01, 2020

Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)

Seungwook Seok Ghadir Haikal Julio A. Ramirez Laura N. Lowes Jeehee Lim

Engineering Structures Vol. 221 pp. 110984 · Elsevier BV

View at Publisher Save 10.1016/j.engstruct.2020.110984

Topics

No keywords indexed for this article. Browse by subject →

References

61

[1]

Chen "Finite-element modeling of intermediate crack debonding in FRP-plated RC beams" J Compos Construct (2011) 10.1061/(asce)cc.1943-5614.0000157

[2]

Erfanian "Bond plastic model for steel–concrete damaged interface element" J Struct Eng (2019) 10.1061/(asce)st.1943-541x.0002302

[3]

Murcia-Delso J, Shing PB. Bond-slip model for detailed finite-element analysis of reinforced concrete structures. J Struct Eng. 2014;141: 04014125 (10 pp.), doi:10.1061/(ASCE)ST.1943-541X.0001070. 10.1061/(asce)st.1943-541x.0001070

[4]

Brown (1993)

[5]

Lagier "3D nonlinear finite-element modeling of lap splices in UHPFRC" J Struct Eng (2016) 10.1061/(asce)st.1943-541x.0001549

[6]

Li (2010)

[7]

Salem "Pre- and postyield finite element method simulation of bond of ribbed reinforcing bars" J Struct Eng (2004) 10.1061/(asce)0733-9445(2004)130:4(671)

[8]

Seok "High-resolution finite element modeling for bond in high-strength concrete beam" Eng Struct (2018) 10.1016/j.engstruct.2018.06.068

[9]

Systèmes D. Abaqus analysis user’s guide, version 6.14, Dassault Systèmes, Providence, RI; 2014.

[10]

Grassl "CDPM2: A damage-plasticity approach to modelling the failure of concrete" Int J Solids Struct (2013) 10.1016/j.ijsolstr.2013.07.008

[11]

Seok S. seungwookseok/ABAQUS-CDPM2: First release of ABAQUS-CDPM2, 2019. https://github.com/seungwookseok/ABAQUS-version-CDPM2.

[12]

Lundgren "Pull-out tests of steel-encased specimens subjected to reversed cyclic loading" Mater Struct (2000) 10.1007/bf02480665

[13]

Metelli "Influence of the relative rib area on bond behaviour" Mag Concr Res (2014) 10.1680/macr.13.00198

[14]

Murcia-Delso "Bond strength and cyclic bond deterioration of large-diameter bars" ACI Struct J (2013)

[15]

Yang "Stress-strain model for various unconfined concretes in compression" Struct J (2014)

[16]

Eligehausen R, Popov EP, Bertero VV. Local bond stress-slip relationships of deformed bars under generalized excitations. Technical Report, Earthquake Engineering Research Center, University of California, Berkeley; 1983. p. 23.

[17]

Tholen (1996)

[18]

Zuo (1998)

[19]

Wriggers P, Zavarise G. Computational contact mechanics, Encyclopedia of computational mechanics; 2004. 10.1002/0470091355.ecm033

[20]

Idun "Bond of epoxy-coated reinforcement: Coefficient of friction and rib face angle" Struct J (1999)

[21]

Abrams DA. Tests of bond between concrete and steel. Technical Report 7. University of Illinois at Urbana Champaign, College of Engineering; 1913.

[22]

Feng "Finite element method to predict reinforcing bar buckling in RC structures" J Struct Eng (2015) 10.1061/(asce)st.1943-541x.0001048

[23]

Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS

Aikaterini S. Genikomsou, Maria Anna Polak

Engineering Structures 2015 10.1016/j.engstruct.2015.04.016

[24]

Huang "3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray computed tomography images using damage plasticity model" Int J Solids Struct (2015) 10.1016/j.ijsolstr.2015.05.002

[25]

Nana "Experimental and numerical modelling of shear behaviour of full-scale RC slabs under concentrated loads" Structures (2017) 10.1016/j.istruc.2017.02.004

[26]

Grassl P. On a damage-plasticity approach to model concrete failure, arXiv preprint arXiv:0811.2776; 2008.

[27]

Grassl "Damage-plastic model for concrete failure" Int J Solids Struct (2006) 10.1016/j.ijsolstr.2006.06.032

[28]

Jason "An elastic plastic damage formulation for concrete: Application to elementary tests and comparison with an isotropic damage model" Comput Methods Appl Mech Eng (2006) 10.1016/j.cma.2005.04.017

[29]

Ju "On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects" Int J Solids Struct (1989) 10.1016/0020-7683(89)90015-2

[30]

Lee "Plastic-damage model for cyclic loading of concrete structures" J Eng Mech (1998)

[31]

Nguyen "A coupled damage–plasticity model for concrete based on thermodynamic principles: Part I: model formulation and parameter identification" Int J Numer Anal Meth Geomech (2008) 10.1002/nag.627

[32]

Nguyen "Development of an approach to constitutive modelling of concrete: Isotropic damage coupled with plasticity" Int J Solids Struct (2008) 10.1016/j.ijsolstr.2008.05.029

[33]

Valentini "Review and enhancement of 3d concrete models for large-scale numerical simulations of concrete structures" Int J Numer Anal Meth Geomech (2013) 10.1002/nag.1096

[34]

Voyiadjis "Anisotropic damage–plasticity model for concrete" Int J Plast (2008) 10.1016/j.ijplas.2008.04.002

[35]

Ansari "High-strength concrete subjected to triaxial compression" Mater J (1998)

[36]

Attard "Stress-strain relationship of confined and unconfined concrete" Mater J (1996)

[37]

Balmer GG. Shearing strength of concrete under high triaxial stress-computation of Mohr’s envelope as a curve. Technical Report SP-23. Structural Research Laboratory Report, United States Department of the Interior, Bureau of Reclamation; 1949.

[38]

Candappa "Complete triaxial stress-strain curves of high-strength concrete" J Mater Civ Eng (2001) 10.1061/(asce)0899-1561(2001)13:3(209)

[39]

Chinn (1965)

[40]

Imran "Experimental study of plain concrete under triaxial stress" Mater J (1996)

[41]

Kotsovos "Mathematical description of deformational behavior of concrete under generalized stress beyond ultimate strength" J Procee (1980)

[42]

Lan "Biaxial compression behavior of concrete under repeated loading" J Mater Civ Eng (1999) 10.1061/(asce)0899-1561(1999)11:2(105)

[43]

Mills "Compressive strength of plain concrete under multiaxial loading conditions" J Proc (1970)

[44]

Richart FE, Brandtzaeg A, Brown RL. A study of the failure of concrete under combined compressive stresses. Technical Report, University of Illinois at Urbana Champaign, College of Engineering; 1928.

[45]

Schickert G, Winkler H. Results of test concerning strength and strain of concrete subjected to multi-axial compressive stress. Deutscher Ausschuss fur Stahlbeton, Heft 277, Berlin, West Germany; 1977.

[46]

Sfer "Study of the behavior of concrete under triaxial compression" J Eng Mech (2002)

[47]

Smith "Concrete over the top, or: is there life after peak?" Mater J (1989)

[48]

Xie "Mechanical properties of three high-strength concretes containing silica fume" Mater J (1995)

[49]

Lim "Finite-element modeling of actively confined normal-strength and high-strength concrete under uniaxial, biaxial, and triaxial compression" J Struct Eng (2016) 10.1061/(asce)st.1943-541x.0001589

[50]

Poliotti "A new concrete plastic-damage model with an evolutive dilatancy parameter" Eng Struct (2019) 10.1016/j.engstruct.2019.03.086

Showing 50 of 61 references

Metrics

60

Citations

61

References

Details

Published: Oct 01, 2020
Vol/Issue: 221
Pages: 110984
License: View

Authors

Funding

Indiana Department of Transportation

Cite This Article

Seungwook Seok, Ghadir Haikal, Julio A. Ramirez, et al. (2020). Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2). Engineering Structures, 221, 110984. https://doi.org/10.1016/j.engstruct.2020.110984

Finite element simulation of bond-zone behavior of pullout test of reinforcement embedded in concrete using concrete damage-plasticity model 2 (CDPM2)

You May Also Like