Subsurface damage detection and structural health monitoring using digital image correlation and topology optimization

M.S. Dizaji; M. Alipour; D.K. Harris

doi:10.1016/j.engstruct.2020.111712

journal article Mar 01, 2021

Subsurface damage detection and structural health monitoring using digital image correlation and topology optimization

M.S. Dizaji M. Alipour D.K. Harris

Engineering Structures Vol. 230 pp. 111712 · Elsevier BV

View at Publisher Save 10.1016/j.engstruct.2020.111712

Topics

No keywords indexed for this article. Browse by subject →

References

93

[1]

Alipour "Increasing the robustness of material-specific deep learning models for crack detection across different materials" Eng Struct (2020) 10.1016/j.engstruct.2019.110157

[2]

Alipour "Robust pixel-level crack detection using deep fully convolutional neural networks" J Comput Civil Eng (2019) 10.1061/(asce)cp.1943-5487.0000854

[3]

Atha "Evaluation of deep learning approaches based on convolutional neural networks for corrosion detection" Struct Health Monitor (2018) 10.1177/1475921717737051

[4]

Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks

Young‐Jin Cha, Wooram Choi, Oral Büyüköztürk

Computer-Aided Civil and Infrastructure Engineerin... 2017 10.1111/mice.12263

[5]

Yeum "Vision-based automated crack detection for bridge inspection" Comput-Aided Civ Infrastruct Eng (2015) 10.1111/mice.12141

[6]

Çatbaş "Structural identification of constructed systems: approaches, methods, and technologies for effective practice of St-Id" American Soc Civil Eng (2013)

[7]

Davis "Nondestructive test methods for evaluation of concrete in structures, American Concrete Institute" ACI (1998)

[8]

Drewry "A review of NDT techniques for wind turbines" Insight-Non-Destructive Testing Condition Monitoring (2007) 10.1784/insi.2007.49.3.137

[9]

Ultrasonic arrays for non-destructive evaluation: A review

Bruce W. Drinkwater, Paul D. Wilcox

NDT & E International 2006 10.1016/j.ndteint.2006.03.006

[10]

Gholizadeh "A review of non-destructive testing methods of composite materials" Procedia Struct Integrity (2016) 10.1016/j.prostr.2016.02.008

[11]

Gholizadeh "A review of the application of acoustic emission technique in engineering" Struct Eng Mech (2015) 10.12989/sem.2015.54.6.1075

[12]

Rehman "Nondestructive test methods for concrete bridges: A review" Constr Build Mater (2016) 10.1016/j.conbuildmat.2015.12.011

[13]

P.J. Shull, Nondestructive evaluation: theory, techniques, and applications, CRC press2002.

[14]

Y. Mei, S. Goenezen, Non-Destructive characterization of heterogeneous solids from limited surface measurements, Proceedings of the 24th International Congress of Theoretical and Applied Mechanics, Montreal, QC, Canada, 2016, pp. 21-26.

[15]

Yang "In-situ X-ray computed tomography characterisation of 3D fracture evolution and image-based numerical homogenisation of concrete" Cem Concr Compos (2017) 10.1016/j.cemconcomp.2016.10.001

[16]

Bagchi "Model-based damage identification in a continuous bridge using vibration data" J Perform Constr Facil (2010) 10.1061/(asce)cf.1943-5509.0000071

[17]

Barthorpe (2010)

[18]

Jang "Corrosion estimation of a historic truss bridge using model updating" J Bridge Eng (2013) 10.1061/(asce)be.1943-5592.0000403

[19]

Doebling (1996)

[20]

Farrar "An introduction to structural health monitoring" Philos Trans Royal Soc A Mathematical Phys Eng Sci (2007)

[21]

Rizzo (2014)

[22]

Seo "Summary review of structural health monitoring applications for highway bridges" J Perform Constr Facil (2016) 10.1061/(asce)cf.1943-5509.0000824

[23]

Atamturktur "Detection of internal defects in concrete members using global vibration characteristics" ACI Mater J (2013)

[24]

Sbarufatti "Performance optimization of a diagnostic system based upon a simulated strain field for fatigue damage characterization" Mech Syst Sig Process (2013) 10.1016/j.ymssp.2013.06.003

[25]

Worden "The application of machine learning to structural health monitoring" Philos Trans Royal Soc A Mathematical Phys Eng Sci (2007)

[26]

Yao "Autoregressive statistical pattern recognition algorithms for damage detection in civil structures" Mech Syst Sig Process (2012) 10.1016/j.ymssp.2012.02.014

[27]

Porcu "Effectiveness of the FRF curvature technique for structural health monitoring" Constr Build Mater (2019) 10.1016/j.conbuildmat.2019.07.123

[28]

Bruggi "Optimization of sensor placement to detect damage in flexible plates" Eng Optim (2013) 10.1080/0305215x.2012.690870

[29]

Shi "Optimum sensor placement for structuraldamage detection" J Eng Mech (2000)

[30]

W.J. Staszewski, K. Worden, Overview of optimal sensor location methods for damage detection, Smart Structures and Materials 2001: Modeling, Signal Processing, and Control in Smart Structures, International Society for Optics and Photonics, 2001, pp. 179-187. 10.1117/12.436472

[31]

Swann "Optimization of piezoelectric sensor location for delamination detection in composite laminates" Eng Optim (2006) 10.1080/03052150600557841

[32]

A. Bagheri, M. Alipour, S. Usmani, O.E. Ozbulut, D.K. Harris, Structural stiffness identification of skewed slab bridges with limited information for load rating purpose, Dynamics of Civil Structures, Volume 2, Springer2017, pp. 243-249. 10.1007/978-3-319-54777-0_30

[33]

Harris "Preserving Coastal Infrastructure through the Design and Implementation of Image-Based Structural Health Monitoring (iSHM)" iSHM (2019)

[34]

Friswell (2013)

[35]

Schlune "Improved bridge evaluation through finite element model updating using static and dynamic measurements" Eng Struct (2009) 10.1016/j.engstruct.2009.02.011

[36]

Sanayei "Instrumentation, nondestructive testing, and finite-element model updating for bridge evaluation using strain measurements" J Bridge Eng (2012) 10.1061/(asce)be.1943-5592.0000228

[37]

A. Al-Radaideh, A. Al-Ali, S. Bheiry, S. Alawnah, A wireless sensor network monitoring system for highway bridges, 2015 International Conference on Electrical and Information Technologies (ICEIT), IEEE, 2015, pp. 119-124. 10.1109/eitech.2015.7162953

[38]

Chen "Full-field 3D measurement using multi-camera digital image correlation system" Opt Lasers Eng (2013) 10.1016/j.optlaseng.2013.03.001

[39]

Noel "Structural health monitoring using wireless sensor networks: A comprehensive survey" IEEE Commun Surv Tutorials (2017) 10.1109/comst.2017.2691551

[40]

Webb "Categories of SHM deployments: technologies and capabilities" J Bridge Eng (2015) 10.1061/(asce)be.1943-5592.0000735

[41]

Sutton (2009)

[42]

LeBlanc "Damage detection and full surface characterization of a wind turbine blade using three-dimensional digital image correlation" Struct Health Monitor (2013) 10.1177/1475921713506766

[43]

Dizaji "Leveraging full-field measurement from 3D digital image correlation for structural identification" Exp Mech (2018) 10.1007/s11340-018-0401-8

[44]

Dizaji (2017)

[45]

Dizaji "Reframing measurement for structural health monitoring: a full-field strategy for structural identification, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XII" Int Soc Opt Photonics (2018)

[46]

M. Shafiei Dizaji, D. Harris, M. Alipour, O. Ozbulut, En “vision” ing a novel approach for structural health monitoring–a model for full-field structural identification using 3D-digital image correlation, The 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Bridbane, Australia, 2017, pp. 5-8.

[47]

A.M. Dizaji MS, Harris D. , Image-based Tomography of Structures to Detect Internal Abnormalities using Inverse Approach. , under review (2020).

[48]

Blaber "Ncorr: open-source 2D digital image correlation matlab software" Exp Mech (2015) 10.1007/s11340-015-0009-1

[49]

Bornert "Assessment of digital image correlation measurement accuracy in the ultimate error regime: improved models of systematic and random errors" Exp Mech (2018) 10.1007/s11340-017-0328-5

[50]

Cheng "Full-field speckle pattern image correlation with B-spline deformation function" Exp Mech (2002) 10.1007/bf02410992

Showing 50 of 93 references

Cited By

48

A two-stage guided wave-based framework for damage localization and shape approximation using a probabilistic binary topology optimization algorithm

Zijie Zeng, Yuan Feng · 2025

Engineering Structures

Metrics

48

Citations

93

References

Details

Published: Mar 01, 2021
Vol/Issue: 230
Pages: 111712
License: View

Authors

Cite This Article

M.S. Dizaji, M. Alipour, D.K. Harris (2021). Subsurface damage detection and structural health monitoring using digital image correlation and topology optimization. Engineering Structures, 230, 111712. https://doi.org/10.1016/j.engstruct.2020.111712

Subsurface damage detection and structural health monitoring using digital image correlation and topology optimization

You May Also Like