Axial compression and bond behaviour of recycled aggregate concrete-filled stainless steel tubular stub columns

Lin-Hai Han; Chuan-Yang Xu; Chao Hou

doi:10.1016/j.engstruct.2022.114306

journal article Jul 01, 2022

Axial compression and bond behaviour of recycled aggregate concrete-filled stainless steel tubular stub columns

Lin-Hai Han Chuan-Yang Xu Chao Hou

Engineering Structures Vol. 262 pp. 114306 · Elsevier BV

View at Publisher Save 10.1016/j.engstruct.2022.114306

Topics

No keywords indexed for this article. Browse by subject →

References

43

[1]

Han "Performance of concrete filled stainless steel tubular (CFSST) columns and joints: Summary of recent research" J Constr Steel Res (2019) 10.1016/j.jcsr.2018.02.038

[2]

Compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST) under short-term loadings

You-Fu Yang, Lin-Hai Han

Steel and Composite Structures 2006 10.12989/scs.2006.6.3.257

[3]

Wang "Testing and analysis of axially loaded normal-strength recycled aggregate concrete filled steel tubular stub columns" Eng Struct (2015) 10.1016/j.engstruct.2015.01.007

[4]

Uy "Behaviour of short and slender concrete-filled stainless steel tubular columns" J Constr Steel Res (2011) 10.1016/j.jcsr.2010.10.004

[5]

Lam "Structural design of stainless steel concrete filled columns" J Constr Steel Res (2008) 10.1016/j.jcsr.2008.04.012

[6]

Young "Experimental investigation of concrete-filled cold-formed high strength stainless steel tube columns" J Constr Steel Res (2006) 10.1016/j.jcsr.2005.08.004

[7]

Experimental behaviour of recycled aggregate concrete filled stainless steel tube stub columns and beams

You-Fu Yang, Guo-Liang Ma

Thin-Walled Structures 2013 10.1016/j.tws.2013.01.017

[8]

Tam "Behaviour of recycled aggregate concrete filled stainless steel stub columns" Mater Struct (2014) 10.1617/s11527-013-0061-1

[9]

Liao "Experimental investigation on sea sand concrete-filled stainless steel tubular stub columns" J Constr Steel Res (2019) 10.1016/j.jcsr.2018.12.009

[10]

Mohammed "State-of-the-art of prefabricated FRP composite jackets for structural repair. Engineering" Science and Technology (2020)

[11]

Alajarmeh "Behavior of circular concrete columns reinforced with hollow composite sections and GFRP bars" Mar struct (2020) 10.1016/j.marstruc.2020.102785

[12]

Ferdous "Short-term flexural behaviour of concrete filled pultruded GFRP cellular and tubular sections with pin-eye connections for modular retaining wall construction[J]" Compos Struct (2018) 10.1016/j.compstruct.2018.08.025

[13]

Ferdous "Geopolymer concrete-filled pultruded composite beams–concrete mix design and application" Cem Concr Compos (2015) 10.1016/j.cemconcomp.2014.12.012

[14]

Tao "Bond behaviour in concrete-filled steel tubes" J Constr Steel Res (2016) 10.1016/j.jcsr.2015.12.030

[15]

Chen "Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes" J Constr Steel Res (2017) 10.1016/j.jcsr.2016.12.012

[16]

Song "Bond behaviour of concrete-filled steel tubes at elevated temperatures" Journal of Structural Engineering-ASCE (2017) 10.1061/(asce)st.1943-541x.0001890

[17]

Han "Performance of concrete-filled thin-walled steel tubes under pure torsion" Thin-Walled Structures (2007) 10.1016/j.tws.2007.01.008

[18]

Han "Concrete-filled steel tubes subjected to axial compression: Life-cycle based performance" J Constr Steel Res (2020) 10.1016/j.jcsr.2020.106063

[19]

Axial compressive behaviour and design calculations on recycled aggregate concrete-filled steel tubular (RAC-FST) stub columns

Wan-Qing Lyu, Lin-Hai Han, Chao Hou

Engineering Structures 2021 10.1016/j.engstruct.2021.112452

[20]

Lyu "Investigation on bond strength between recycled aggregate concrete (RAC) and steel tube in RAC-filled steel tubes" J Constr Steel Res (2019) 10.1016/j.jcsr.2018.12.028

[21]

GB/T 20878. Grade and chemical composition of stainless steel and heat resistant steel, China Building Industry Press, Beijing, 2007.

[22]

GB/T 228.1. Metallic materials- tensile testing- Part1: Method of test at room temperature, China Building Industry Press, Beijing, 2007.

[23]

GB/T 50081. Standard for test method of mechanical properties on ordinary concrete, China Building Industry Press, Beijing, 2002.

[24]

Li "Experimental study on seawater and sea sand concrete filled GFRP and stainless steel tubular stub columns" Thin-Walled Structures (2016) 10.1016/j.tws.2016.05.014

[25]

Li "Tests on seawater and sea sand concrete-filled CFRP, BFRP and stainless steel tubular stub columns" Thin-Walled Structures (2016) 10.1016/j.tws.2016.08.016

[26]

Liu (2011)

[27]

Shakir-Khalil "Push out strength of concrete-filled steel hollow sections" Structural Engineer (1993)

[28]

Roeder "Composite Action in Concrete Filled Tubes" J Struct Eng (1999) 10.1061/(asce)0733-9445(1999)125:5(477)

[29]

Gardner "Structural design for nonlinear metallic materials" Eng Struct (2006) 10.1016/j.engstruct.2005.11.001

[30]

Rasmussen "Full-range stress–strain curves for stainless steel alloys" J Constr Steel Res (2003) 10.1016/s0143-974x(02)00018-4

[31]

Cruise "Strength enhancements induced during cold forming of stainless steel sections" J Constr Steel Res (2008) 10.1016/j.jcsr.2008.04.014

[32]

Dassault Systèmes Simulia Corp. Abaqus 6.14 analysis user’s manual. Providence, RI, USA.

[33]

Han "Concrete-Filled Steel Tubular Structures" China Science Press (2007)

[34]

Han "Performance and calculations of concrete filled steel tubes (CFST) under axial tension" J Constr Steel Res (2011) 10.1016/j.jcsr.2011.04.005

[35]

Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements

A. Hillerborg, M. Modéer, P.-E. Petersson

Cement and Concrete Research 1976 10.1016/0008-8846(76)90007-7

[36]

Gardner "Numerical modeling of stainless steel structural components—a consistent approach" J Struct Eng (2004) 10.1061/(asce)0733-9445(2004)130:10(1586)

[37]

Ashraf "Finite element modelling of structural stainless steel cross-sections" Thin-walled structures (2006) 10.1016/j.tws.2006.10.010

[38]

GB 50396, Technical code for concrete filled steel tubular structures. China Building Industry Press, Beijing, 2014.

[39]

GB 50068, Unified Standard for Reliability Design of Building Structures. China Building Industry Press, Beijing, 2018.

[40]

Shi G, Zhu X. Research on resistance model uncertainty of high-strength steel axial compression members // Proceedings of the Thirteenth International Symposium on Structural Engineering. Hefei: 2014: 1072-1080.

[41]

Su "Experimental and theoretical basis of strength design value of stainless steel. Journal of Building" Structure (2003)

[42]

GB 50153, Unified standard for reliability design of building structures. China Building Industry Press, Beijing, 2018.

[43]

An "Behaviour and design calculations on very slender thin-walled CFST columns" Thin-Walled Structures (2012) 10.1016/j.tws.2012.01.011

Metrics

80

Citations

43

References

Details

Published: Jul 01, 2022
Vol/Issue: 262
Pages: 114306
License: View

Authors

State Key Laboratory of Intelligent Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China.; Flexible Electronics Research Center, Huazhong University of Science and Technology, Wuhan 430074, China.

Funding

National Natural Science Foundation of China Award: 51838008

Cite This Article

Lin-Hai Han, Chuan-Yang Xu, Chao Hou (2022). Axial compression and bond behaviour of recycled aggregate concrete-filled stainless steel tubular stub columns. Engineering Structures, 262, 114306. https://doi.org/10.1016/j.engstruct.2022.114306

Axial compression and bond behaviour of recycled aggregate concrete-filled stainless steel tubular stub columns

You May Also Like