Immobilizing Polysulfide via Multiple Active Sites in W18O49 for Li-S batteries by Oxygen Vacancy Engineering

Yang "Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design" Chem. Soc. Rev. (2020) 10.1039/c9cs00635d

[2]

Li "Recent progress in developing Li2S cathodes for Li-S batteries" Energy Storage Mater (2020) 10.1016/j.ensm.2020.02.010

[3]

Pang "Advances in lithium-sulfur batteries based on multifunctional cathodes and electrolytes" Nature Energy (2016) 10.1038/nenergy.2016.132

[4]

Huang "Recent Advances in Heterostructure Engineering for Lithium-Sulfur Batteries" Adv. Energy Mater. (2021) 10.1002/aenm.202003689

[5]

Zuo "Applications of transition-metal sulfides in the cathodes of lithium-sulfur batteries" Tungsten (2020) 10.1007/s42864-020-00046-6

[6]

Wang "Efficient Trapping and Catalytic Conversion of Polysulfides by VS4 Nanosites for Li-S Batteries" ACS Energy Lett (2019) 10.1021/acsenergylett.9b00076

[7]

Wang "Designing a highly efficient polysulfide conversion catalyst with paramontroseite for high-performance and long-life lithium-sulfur batteries" Nano Energy (2019) 10.1016/j.nanoen.2018.12.020

[8]

Wang "Insight into MoS2-MoN Heterostructure to Accelerate Polysulfide Conversion toward High-Energy-Density Lithium–Sulfur Batteries" Adv. Energy Mater. (2021) 10.1002/aenm.202003314

[9]

Song "Dual-heterostructures decorated interweaved carbon nanofibers sulfur host for high performance lithium-sulfur batteries" Chem. Eng. J. (2021) 10.1016/j.cej.2021.129388

[10]

Zha "Facet-tailoring five-coordinated Ti sites and structure-optimizing electron transfer in a bifunctional cathode with titanium nitride nanowire array to boost the performance of Li2S6-based lithium-sulfur batteries" Energy Storage Mater (2020) 10.1016/j.ensm.2019.12.032

[11]

Chen "MOFs-derived porous Mo2C-C nano-octahedrons enable high-performance lithium-sulfur batteries" Energy Storage Mater (2020) 10.1016/j.ensm.2019.09.028

[12]

Wu "Promoting polythionate intermediates formation by oxygen-deficient manganese oxide hollow nanospheres for high performance lithium-sulfur batteries" Chem. Eng. J. (2019) 10.1016/j.cej.2019.03.078

[13]

Luo "Synergistic Engineering of Defects and Architecture in Binary Metal Chalcogenide toward Fast and Reliable Lithium-Sulfur Batteries" Adv. Energy Mater. (2019) 10.1002/aenm.201900228

[14]

Luo "Revealing the Rapid Electrocatalytic Behavior of Ultrafine Amorphous Defective Nb2O5-x Nanocluster toward Superior Li-S Performance" ACS nano (2020) 10.1021/acsnano.0c00799

[15]

Xu "Oxygen Vacancies on Layered Niobic Acid That Weaken the Catalytic Conversion of Polysulfides in Lithium-Sulfur Batteries" Angew. Chem. Int. Ed. Engl. (2019) 10.1002/anie.201905852

[16]

Wang "Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering" Adv. Energy Mater. (2019) 10.1002/aenm.201900953

[17]

Cong "Tungsten Oxide Materials for Optoelectronic Applications" Adv. Mater. (2016) 10.1002/adma.201601109

[18]

Migas "Tungsten oxides. II. The metallic nature of Magnéli phases" J. Appl. Phys. (2010) 10.1063/1.3505689

[19]

Xi "Ultrathin W18O49 nanowires with diameters below 1 nm: synthesis, near-infrared absorption, photoluminescence, and photochemical reduction of carbon dioxide" Angew. Chem. Int. Ed. Engl. (2012) 10.1002/anie.201107681

[20]

Guo "Morphology-controlled synthesis of W18O49 nanostructures and their near-infrared absorption properties" Inorg. Chem. (2012) 10.1021/ic300049j

[21]

Sinha "Surface Oxygen Vacancy Formulated Energy Storage Application: Pseudocapacitor-Battery Trait of W18O49 Nanorods" J. Electrochem. Soc. (2019) 10.1149/2.1251914jes

[22]

Lee "Synthesis and optical properties of colloidal tungsten oxide nanorods" J. Am. Chem. Soc. (2003) 10.1021/ja034011e

[23]

Pang "Formation of high-performance Cu-WOx@C tribasic composite electrode for aqueous symmetric supercapacitor" Mater. Today Energy (2019) 10.1016/j.mtener.2019.05.016

[24]

Tsyganenko "FTIR study of unsupported molybdenum sulfide?in situ synthesis and surface properties characterization" Appl. Catal. A: Gen. (2004) 10.1016/j.apcata.2004.03.038

[25]

Wang "Graphene Oxide-Template Controlled Cuboid-Shaped High-Capacity VS4 Nanoparticles as Anode for Sodium-Ion Batteries" Adv. Funct. Mater. (2018) 10.1002/adfm.201801806

[26]

Song "Controllable morphologies and electrochemical performances of self-assembled nano-honeycomb WS2 anodes modified by graphene doping for lithium and sodium ion batteries" Carbon (2019) 10.1016/j.carbon.2018.07.060

[27]

Lei "Oxygen vacancies confined in ultrathin indium oxide porous sheets for promoted visible-light water splitting" J. Am. Chem. Soc. (2014) 10.1021/ja501866r

[28]

Yang "ZnSe/N-Doped Carbon Nanoreactor with Multiple Adsorption Sites for Stable Lithium-Sulfur Batteries" ACS nano (2020) 10.1021/acsnano.0c06112

[29]

Zhou "Cooperative catalytic interface accelerates redox kinetics of sulfur species for high-performance Li-S batteries" Energy Storage Mater (2021) 10.1016/j.ensm.2021.05.009

[30]

Wang "Highly Stable Lithium-Sulfur Batteries Promised by Siloxene: An Effective Cathode Material to Regulate the Adsorption and Conversion of Polysulfides" Adv. Funct. Mater. (2020) 10.1002/adfm.201910331

[31]

Choi "WO3 nanolayer coated 3D-graphene/sulfur composites for high performance lithium/sulfur batteries" J. Mater. Chem. A (2019) 10.1039/c8ta11646f

[32]

Zhang "Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium-Sulfur Batteries" Nano Lett (2015) 10.1021/acs.nanolett.5b00367

[33]

Chen "An Analogous Periodic Law for Strong Anchoring of Polysulfides on Polar Hosts in Lithium Sulfur Batteries: S- or Li-Binding on First-Row Transition-Metal Sulfides?" ACS Energy Lett (2017) 10.1021/acsenergylett.7b00164

[34]

Liu "A study of the hydrogen adsorption mechanism of W18O49 using first-principles calculations" Comp. Mater. Sci. (2018) 10.1016/j.commatsci.2018.07.036

[35]

Zhang "Optimized Catalytic WS2-WO3 Heterostructure Design for Accelerated Polysulfide Conversion in Lithium-Sulfur Batteries" Adv. Energy Mater. (2020) 10.1002/aenm.202000091

[36]

Peng "Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium-Sulfur Batteries" Angew. Chem. Int. Ed. (2016) 10.1002/anie.201605676

[37]

Lin "Elucidating the Catalytic Activity of Oxygen Deficiency in the Polysulfide Conversion Reactions of Lithium-Sulfur Batteries" Adv. Energy Mater. (2018) 10.1002/aenm.201801868

[38]

Ye "Enhanced polysulfide conversion catalysis in lithium-sulfur batteries with surface cleaning electrolyte additives" Chem. Eng. J. (2021) 10.1016/j.cej.2020.128284

[39]

Yuan "Powering Lithium-Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts" Nano Lett (2016) 10.1021/acs.nanolett.5b04166

[40]

Xu "Manipulating the Redox Kinetics of Li-S Chemistry by Tellurium Doping for Improved Li–S Batteries" ACS Energy Lett (2018) 10.1021/acsenergylett.7b01249

[41]

Lei "Tungsten disulfide: synthesis and applications in electrochemical energy storage and conversion" Tungsten (2020) 10.1007/s42864-020-00054-6

Cited By

87

Redox contrast of W at EuWO4/W interfaces promotes polysulfide conversion in lithium–sulfur batteries

Fushuai Yu, Xiaoyu Chen · 2026

Chemical Engineering Journal

Targeting Acceleration of the Rate-Determining Step in Sulfur Redox and Dendrite-Free Lithium: Heterointerface and Electron Structural Engineering

Qi Liang, Yunfei Bai · 2025

ACS Nano

Nitrogen and Sulfur Doped Porous Carbon Sheet with Trace Amount of Iron as Efficient Polysulfide Conversion Catalyst for High Loading Lithium‐Sulfur Batteries

Jeevanantham Sivaraj, Bosubabu Dasari · 2024

ChemPhysChem

Oxygen vacancy-mediated amorphous GeOx assisted polysulfide redox kinetics for room-temperature sodium-sulfur batteries

Qiuyang Ma, Qiqi Liu · 2023

Journal of Colloid and Interface Sc...

Integrating Energy Band Alignment and Oxygen Vacancies Engineering of TiO2 Anatase/Rutile Homojunction for Kinetics‐Enhanced Li–S Batteries

Li Ma, Youquan Zhang · 2023

Advanced Functional Materials

Transition Metal Compounds Family for Li–S Batteries: The DFT‐Guide for Suppressing Polysulfides Shuttle

Qi Liang, Sizhe Wang · 2023

Advanced Functional Materials

Metrics

87

Citations

41

References

Details

Published: Dec 01, 2021
Vol/Issue: 43
Pages: 422-429
License: View

Authors

Kunming University

Institute of Image Processing and Pattern Recognition, Shanghai Jiao Tong University, and Key Laboratory of System Control and Information Processing, Ministry of Education of China, Shanghai 200240, China

Y

Yong Li

Business Growth BU, JD.com

Funding

National Natural Science Foundation of China Award: 51875330

China Postdoctoral Science Foundation

Natural Science Foundation of Shaanxi Province Award: 2021JQ-538

McMaster University

Cite This Article

Sizhe Wang, Yi Wang, Yaochen Song, et al. (2021). Immobilizing Polysulfide via Multiple Active Sites in W18O49 for Li-S batteries by Oxygen Vacancy Engineering. Energy Storage Materials, 43, 422-429. https://doi.org/10.1016/j.ensm.2021.09.020

Immobilizing Polysulfide via Multiple Active Sites in W18O49 for Li-S batteries by Oxygen Vacancy Engineering

You May Also Like