Two strain modes and transition point of 18650 lithium-ion battery at different charging rates

Luo "Overview of current development in electrical energy storage technologies and the application potential in power system operation" Appl. Energy (2015) 10.1016/j.apenergy.2014.09.081

[2]

Issues and challenges facing rechargeable lithium batteries

J.-M. Tarascon, M. Armand

Nature 2001 10.1038/35104644

[3]

Zeng "Research on aging mechanism and state of health prediction in lithium batteries" J. Energy Storage (2023) 10.1016/j.est.2023.108274

[4]

Li "Digital twin for battery systems: cloud battery management system with online state-of-charge and state-of-health estimation" J. Energy Storage (2020) 10.1016/j.est.2020.101557

[5]

Schweidler "Volume changes of graphite anodes revisited: a combined operando X-ray diffraction and in situ pressure analysis study" J. Phys. Chem. C (2018) 10.1021/acs.jpcc.8b01873

[6]

Blazek "Axially and radially inhomogeneous swelling in commercial 18650 Li-ion battery cells" J. Energy Storage (2022) 10.1016/j.est.2022.104563

[7]

Mukhopadhyay "Deformation and stress in electrode materials for Li-ion batteries" Prog. Mater. Sci. (2014) 10.1016/j.pmatsci.2014.02.001

[8]

Wang "Factors affecting stress in anode particles during charging process of lithium ion battery" J. Energy Storage (2021) 10.1016/j.est.2021.103214

[9]

Ding "A review on the failure and regulation of solid electrolyte interphase in lithium batteries" J. Energy Chem. (2021) 10.1016/j.jechem.2020.11.016

[10]

Lithium Plating Behavior in Lithium-Ion Cells

Ratnakumar V. Bugga, Marshall C. Smart

ECS Transactions 2010 10.1149/1.3393860

[11]

Uhlmann "In situ detection of lithium metal plating on graphite in experimental cells" J. Power Sources (2015) 10.1016/j.jpowsour.2015.01.046

[12]

Bitzer "A new method for detecting lithium plating by measuring the cell thickness" J. Power Sources (2014) 10.1016/j.jpowsour.2014.03.142

[13]

Kirchev "Li-ion cell safety monitoring using mechanical parameters, part 3: battery behaviour during abusive overcharge" Batteries (2023) 10.3390/batteries9070338

[14]

Kirchev "Li-ion cell safety monitoring using mechanical parameters: part II. Battery behavior during thermal abuse tests" J. Electrochem. Soc. (2023) 10.1149/1945-7111/acada6

[15]

Mechanical strain signal based early warning for failure of different prismatic lithium-ion batteries

Siqi Chen, Xuezhe Wei, Guangxu Zhang et al.

Journal of Power Sources 2023 10.1016/j.jpowsour.2023.233397

[16]

Gong "Voltage-stress-based state of charge estimation of pouch lithium-ion batteries using a long short-term memory network" J. Energy Storage (2022) 10.1016/j.est.2022.105720

[17]

Peng "State estimation of lithium-ion batteries based on strain parameter monitored by fiber Bragg grating sensors" J. Energy Storage (2022) 10.1016/j.est.2022.104950

[18]

Ee "Lithium-ion battery state of charge (SoC) estimation with non-electrical parameter using uniform Fiber Bragg Grating (FBG)" J. Energy Storage (2021) 10.1016/j.est.2021.102704

[19]

Willenberg "High-precision monitoring of volume change of commercial lithium-ion batteries by using strain gauges" Sustainability (2020) 10.3390/su12020557

[20]

Zhu "In-situ obtained internal strain and pressure of the cylindrical Li-ion battery cell with silicon-graphite negative electrodes" J. Energy Storage (2021) 10.1016/j.est.2021.103049

[21]

Hickey (2019)

[22]

Zhu "In operando measuring circumferential internal strain of 18650 Li-ion batteries by thin film strain gauge sensors" J. Power Sources (2021) 10.1016/j.jpowsour.2021.230669

[23]

Beaulieu "Reaction of Li with alloy thin films studied by in situ AFM" J. Electrochem. Soc. (2003)

[24]

Dahn "Phase diagram of LixC6" Phys. Rev. B Condens. Matter (1991) 10.1103/physrevb.44.9170

[25]

The success story of graphite as a lithium-ion anode material – fundamentals, remaining challenges, and recent developments including silicon (oxide) composites

Jakob Asenbauer, Tobias Eisenmann, Matthias Kuenzel et al.

Sustainable Energy & Fuels 2020 10.1039/d0se00175a

[26]

Sethuraman "Surface structural disordering in graphite upon lithium intercalation/deintercalation" J. Power Sources (2010) 10.1016/j.jpowsour.2009.12.034

[27]

Li "Revealing the mechanism of stress rebound during discharging in lithium-ion batteries" J. Energy Storage (2023) 10.1016/j.est.2022.106454

[28]

Nie "Impacts of electrode shape on lithiation performance: the edge effect on lithium intercalation" J. Energy Storage (2022) 10.1016/j.est.2021.103568

[29]

Koseoglou "Lithium plating detection using differential charging current analysis in lithium-ion batteries" J. Energy Storage (2022) 10.1016/j.est.2022.105345

[30]

Legrand "Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling" J. Power Sources (2014) 10.1016/j.jpowsour.2013.06.130

[31]

Lu "Overcharge effect on morphology and structure of carbon electrodes for Lithium-ion batteries" J. Electrochem. Soc. (2012) 10.1149/2.jes035205

[32]

Valentin "Modeling of thermo-mechanical stresses in Li-ion battery" J. Energy Storage (2017) 10.1016/j.est.2017.07.018

Cited By

15

Experimental study of instantaneous force and electrochemical characteristics of prismatic lithium-ion batteries under preload condition

Jinqi Liu, Hengyun Zhang · 2026

Journal of Energy Storage

Metrics

15

Citations

32

References

Details

Published: Mar 01, 2024
Vol/Issue: 80
Pages: 110383
License: View

Authors

Department of Applied Chemistry, College of Science, Northeast Agricultural University, Harbin 150030, China

Funding

National Natural Science Foundation of China Award: 52090064

Cite This Article

Jifeng Song, Yuanlong Li, Tao Ren, et al. (2024). Two strain modes and transition point of 18650 lithium-ion battery at different charging rates. Journal of Energy Storage, 80, 110383. https://doi.org/10.1016/j.est.2023.110383

Two strain modes and transition point of 18650 lithium-ion battery at different charging rates

You May Also Like