Thermo-hydraulic performance optimization of a disk-shaped microchannel heat sink applying computational fluid dynamics, artificial neural network, and response surface methodology

Nekahi "A numerical approach to the heat transfer and thermal stress in a gas turbine stator blade made of HfB2" Ceram. Int. (2019) 10.1016/j.ceramint.2019.08.112

[3]

Vaferi "Thermo-mechanical simulation of ultrahigh temperature ceramic composites as alternative materials for gas turbine stator blades" Ceram. Int. (2020)

[4]

Sidik "An overview of passive techniques for heat transfer augmentation in microchannel heat sink" Int. Commun. Heat Mass Tran. (2017) 10.1016/j.icheatmasstransfer.2017.08.009

[5]

Nekahi "Finned heat exchangers made of TiB2–SiC–graphene composites with enhanced heat transfer performance" J. Brazilian Soc. Mech. Sci. Eng. (2023) 10.1007/s40430-023-04362-z

[6]

Li "Hydrothermal performance analysis of microchannel heat sink with embedded module with ribs and pin-fins" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120167

[7]

Tan "Flow and thermal performance of a multi-jet twisted square microchannel heat sink using CuO-water nanofluid" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120133

[8]

Manoj "Heat transfer and fluid Flow characteristics of a microchannel heat sink with microplates - a critical computational study" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120309

[9]

Yang "Numerical and experimental analysis of cooling performance of single-phase array microchannel heat sinks with different pin-fin configurations" Appl. Therm. Eng. (2017) 10.1016/j.applthermaleng.2016.08.211

[10]

Sikirica "Machine learning based surrogate models for microchannel heat sink optimization" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2022.119917

[11]

High-performance heat sinking for VLSI

D.B. Tuckerman, R.F.W. Pease

IEEE Electron Device Letters 1981 10.1109/edl.1981.25367

[12]

Vaferi "Numerical simulation of cooling performance in microchannel heat sinks made of AlN ceramics" Microsyst. Technol. (2023) 10.1007/s00542-022-05400-x

[13]

Ryu "Three-dimensional numerical optimization of a manifold microchannel heat sink" Int. J. Heat Mass Transf. (2003) 10.1016/s0017-9310(02)00443-x

[14]

Nekahi "TiB2–SiC-based ceramics as alternative efficient micro heat exchangers" Ceram. Int. (2019) 10.1016/j.ceramint.2019.06.150

[15]

Ali "Numerical analysis on the thermal performance of microchannel heat sinks with Al2O3 nanofluid and various fins" Appl. Therm. Eng. (2021) 10.1016/j.applthermaleng.2021.117458

[16]

Alihosseini "Thermo-hydraulic performance of wavy microchannel heat sink with oblique grooved finned" Appl. Therm. Eng. (2021) 10.1016/j.applthermaleng.2021.116719

[17]

Li "Thermal and hydraulic characteristics of microchannel heat sinks with cavities and fins based on field synergy and thermodynamic analysis" Appl. Therm. Eng. (2020) 10.1016/j.applthermaleng.2020.115348

[18]

Mohammed "Influence of various base nanofluids and substrate materials on heat transfer in trapezoidal microchannel heat sinks" Int. Commun. Heat Mass Tran. (2011) 10.1016/j.icheatmasstransfer.2010.12.010

[19]

Mohammed "The impact of various nanofluid types on triangular microchannels heat sink cooling performance" Int. Commun. Heat Mass Tran. (2011) 10.1016/j.icheatmasstransfer.2011.03.024

[20]

Zhang "Numerical study on thermal and hydraulic performance of a stacked-plate jet-impingement/microchannel heat sink" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120134

[21]

Bejan "Deterministic tree networks for fluid flow: geometry for minimal flow resistance between a volume and one point" Fractals (1997) 10.1142/s0218348x97000553

[22]

Xu "A numerica1 study of fluid flow and heat transfer in different microchannel heat sinks for electronic chip cooling" J. Mech. Sci. Technol. (2012) 10.1007/s12206-012-0209-x

[23]

Chai "Parametric study on thermal and hydraulic characteristics of laminar flow in microchannel heat sink with fan-shaped ribs on sidewalls – Part 1: heat transfer" Int. J. Heat Mass Transf. (2016) 10.1016/j.ijheatmasstransfer.2016.02.077

[24]

Pan "Experimental investigation of the heat transfer performance of microchannel heat exchangers with fan-shaped cavities" Int. J. Heat Mass Transf. (2019) 10.1016/j.ijheatmasstransfer.2019.01.140

[25]

Huang "Numerical investigation of the fluid flow and heat transfer characteristics of tree-shaped microchannel heat sink with variable cross-section" Chem. Eng. Process. - Process Intensif. (2020) 10.1016/j.cep.2019.107769

[26]

Panicker "Computational fluid dynamics investigations of flow, heat transfer, and oxidation in heat recovery steam generator" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120089

[27]

Hamad "Computational fluid dynamics analysis and optimisation of polymerase chain reaction thermal flow systems" Appl. Therm. Eng. (2021) 10.1016/j.applthermaleng.2020.116122

[28]

Al-Damook "Energy efficient double-pass photovoltaic/thermal air systems using a computational fluid dynamics multi-objective optimisation framework" Appl. Therm. Eng. (2021) 10.1016/j.applthermaleng.2021.117010

[29]

Lindqvist "Plate fin-and-tube heat exchanger computational fluid dynamics model" Appl. Therm. Eng. (2021) 10.1016/j.applthermaleng.2021.116669

[30]

Linka "A new family of Constitutive Artificial Neural Networks towards automated model discovery" Comput. Methods Appl. Mech. Eng. (2023) 10.1016/j.cma.2022.115731

[31]

Ntetsika "Numerical simulation and predictive modeling of an inextensible filament in two-dimensional viscous shear flow using the Immersed Boundary/Coarse-Graining Method and Artificial Neural Networks" Comput. Methods Appl. Mech. Eng. (2022) 10.1016/j.cma.2022.115589

[32]

Ayodele "Process intensification of hydrogen production by catalytic steam methane reforming: performance analysis of multilayer perceptron-artificial neural networks and nonlinear response surface techniques" Process Saf. Environ. Prot. (2021) 10.1016/j.psep.2021.10.016

[33]

Soleimani "Swelling prediction of calcium alginate/cellulose nanocrystal hydrogels using response surface methodology and artificial neural network" Ind. Crops Prod. (2023) 10.1016/j.indcrop.2022.116094

[34]

Dong "Numerical approximation of partial differential equations by a variable projection method with artificial neural networks" Comput. Methods Appl. Mech. Eng. (2022) 10.1016/j.cma.2022.115284

[35]

Wang "A feedforward-feedback control strategy based on artificial neural network for solar receivers" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120069

[36]

Abdelghany "Utilizing artificial neural networks to predict the thermal performance of conical tubes with pulsating flow" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2023.120087

[37]

Chen "Development of an efficient ammonia-water power cycle through heat exchanger network analysis and artificial neural network" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2022.119426

[38]

Yu "Numerical study on turbulent heat transfer performance of a new parallel-flow shell and tube heat exchanger with sinusoidal wavy tapes using RSM analysis" Appl. Therm. Eng. (2019) 10.1016/j.applthermaleng.2019.01.043

[39]

Han "Multi-objective shape optimization of double pipe heat exchanger with inner corrugated tube using RSM method" Int. J. Therm. Sci. (2015) 10.1016/j.ijthermalsci.2014.12.010

[40]

Moya-Rico "Characterization of a triple concentric-tube heat exchanger with corrugated tubes using Artificial Neural Networks (ANN)" Appl. Therm. Eng. (2019) 10.1016/j.applthermaleng.2018.10.136

[41]

Gao "Fluid flow and heat transfer in microchannel heat sinks: modelling review and recent progress" Therm. Sci. Eng. Prog. (2022)

[42]

Yang "Experimental and numerical investigation of low melting point metal based PCM heat sink with internal fins" Int. Commun. Heat Mass Tran. (2017) 10.1016/j.icheatmasstransfer.2017.07.001

[43]

Singh "Investigation of machining characteristics in rotary ultrasonic machining of alumina ceramic" Mater. Manuf. Process. (2017) 10.1080/10426914.2016.1176190

[44]

Kansa "Numerical simulation of two-dimensional combustion using mesh-free methods" Eng. Anal. Bound. Elem. (2009) 10.1016/j.enganabound.2009.02.008

[45]

Sanchez-Señoran "Numerical simulation of convective heat transfer coefficient in wire mesh absorbers with fixed porosity" Results Eng (2023) 10.1016/j.rineng.2022.100830

[46]

Liu "Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm" Appl. Therm. Eng. (2023) 10.1016/j.applthermaleng.2022.119824

[47]

Samuel "Grey Wolf Optimizer for enhancing Nicotiana Tabacum L. oil methyl ester and prediction model for calorific values" Case Stud. Therm. Eng. (2022) 10.1016/j.csite.2022.102095

[48]

Samuel "Performance comparison of empirical model and Particle Swarm Optimization & its boiling point prediction models for waste sunflower oil biodiesel" Case Stud. Therm. Eng. (2022) 10.1016/j.csite.2022.101947

[49]

David Samuel "Prandtl number of optimum biodiesel from food industrial waste oil and diesel fuel blend for diesel engine" Fuel (2021) 10.1016/j.fuel.2020.119049

[50]

Samuel "Neem-castor seed oil esterification modelling: comparison of RSM and ANFIS" Mater. Today Proc. (2023) 10.1016/j.matpr.2023.01.251

Showing 50 of 57 references

Cited By

49

Performance-cost co-optimization of shell-and-tube thermal energy storage units with enhanced sub-fin geometry via a hybrid numerical–AI approach

Yong-hui Li, Ali Basem · 2026

Journal of Energy Storage

Enhancing charging and discharging performance in a novel latent heat storage via design optimization and artificial neural network modeling

Kourosh Vaferi, Amirhamzeh Farajollahi · 2025

Journal of Energy Storage

Solar-powered compact thermal energy storage system with rapid response time and rib-enhanced plate via techniques of CFD, ANN, and GA

Gongxing Yan, Jialing Li · 2025

Journal of Energy Storage

Optimization and prediction of heat absorption in a modular multi-section latent heat storage system with dome-shaped components using a multilayer perceptron model, TOPSIS analysis, and Pareto fronts

Wenliang Deng, Jialing Li · 2025

Journal of Energy Storage

Optimizing novel thermal energy storage systems: Enhancing melting efficiency with tubes, stands, and advanced machine learning techniques

Ahmad Almadhor, Ali Basem · 2025

Journal of Energy Storage

Optimizing finned-microchannel heat sink design for enhanced overall performance by three different approaches: Numerical simulation, artificial neural network, and multi-objective optimization

Sahar Nekahi, Farhad Sadegh Moghanlou · 2024

Applied Thermal Engineering

Analyzing tube arrangements of a finned-tube heat exchanger to optimize overall efficiency using artificial neural network and response surface methodology

Amirhamzeh Farajollahi, Kourosh Vaferi · 2024

Case Studies in Thermal Engineering

Optimizing and investigating the charging time of phase change materials in a compact-latent heat storage using pareto front analysis, artificial neural networks, and numerical simulations

Zhongbiao Zheng, Gongxing Yan · 2024

Journal of Energy Storage

Advancing solar thermal utilization by optimization of phase change material thermal storage systems: A hybrid approach of artificial neural network (ANN)/Genetic algorithm (GA)

Longyi Ran, Gongxing Yan · 2024

Case Studies in Thermal Engineering

Metrics

49

Citations

57

References

Details

Published: Oct 01, 2023
Vol/Issue: 9(10)
Pages: e21031
License: View

Authors

Farhad Sadegh Moghanlou

Cite This Article

Kourosh Vaferi, Mohammad Vajdi, Sahar Nekahi, et al. (2023). Thermo-hydraulic performance optimization of a disk-shaped microchannel heat sink applying computational fluid dynamics, artificial neural network, and response surface methodology. Heliyon, 9(10), e21031. https://doi.org/10.1016/j.heliyon.2023.e21031

Thermo-hydraulic performance optimization of a disk-shaped microchannel heat sink applying computational fluid dynamics, artificial neural network, and response surface methodology

You May Also Like