Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles

M. Effendy; Y.F. Yao; J. Yao; D.R. Marchant

doi:10.1016/j.ijheatfluidflow.2019.108487

journal article Dec 01, 2019

Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles

M. Effendy Y.F. Yao J. Yao D.R. Marchant

International Journal of Heat and Fluid Flow Vol. 80 pp. 108487 · Elsevier BV

View at Publisher Save 10.1016/j.ijheatfluidflow.2019.108487

Topics

No keywords indexed for this article. Browse by subject →

References

57

[1]

Ames "Turbulent transport in pin–fin arrays: experimental data predictions" J. Turbomach. (2006) 10.1115/1.2098792

[2]

Ames "Turbulent augmentation of internal convection over pins in staggered pin–fin arrays" J. Turbomach. (2005) 10.1115/1.1811090

[3]

Axtmann "Endwall heat transfer and pressure loss measurements in staggered arrays of adiabatic pin–fins" J. Appl. Therm. Eng. (2016) 10.1016/j.applthermaleng.2016.04.066

[4]

Barigozzi "Experimental investigation of the effects of blowing conditions and mach number on the unsteady behavior of coolant ejection through a trailing–edge cutback" J. Heat Fluid Flow (2012) 10.1016/j.ijheatfluidflow.2012.07.001

[5]

Becchi "Film cooling adiabatic effectiveness measurements of pressure side trailing–edge cooling configurations" J. Propuls. Power Res. (2015) 10.1016/j.jppr.2015.10.001

[6]

Beghini "High temperature fatigue testing of gas turbine blades" Procedia Struct. Integr. (2017) 10.1016/j.prostr.2017.11.079

[7]

Beniaiche "Nusselt correlations in a trailing–edge cooling system with long pedestals and ribs" Energy Procedia (2014) 10.1016/j.egypro.2014.01.112

[8]

Benson "Measurements of 3D velocity and scalar field for a film-cooled airfoil trailing edge" Exp. Fluids (2011) 10.1007/s00348-011-1062-x

[9]

Benson "Effects of varying reynolds number, blowing ratio, and internal geometry on trailing edge cutback film cooling" Exp. Fluids (2012) 10.1007/s00348-012-1260-1

[10]

Benson "Experimental-Based redesigns for trailing–edge film cooling of gas turbine blades" J. Turbomach. (2013) 10.1115/1.4007601

[11]

Brundage "Experimental investigation of airfoil trailing–edge heat transfer and aerodynamic losses" Exp. Therm. Fluid Sci. (2007) 10.1016/j.expthermflusci.2006.04.004

[12]

Carter "Common failures in gas turbine blades" Eng. Fail. Anal. (2005) 10.1016/j.engfailanal.2004.07.004

[13]

Chen "High resolution piv measurements around a model turbine blade trailing–edge film-cooling breakout" Exp. Fluids (2008) 10.1007/s00348-007-0391-2

[14]

Choi "Film cooling and heat transfer on two cutback trailing–edge models with internal perforated blockages" J. Heat Transfer (2008) 10.1115/1.2780174

[15]

Choi "Investigation of blade failure in a gas turbine" Mech. Sci. Technol. (2010) 10.1007/s12206-010-0614-y

[16]

Chowdhury "A predictive model for preliminary gas turbine blade cooling analysis" J. Turbomach. (2018)

[17]

Cunha "Trailing-Edge cooling for gas turbines" J. Propuls. Power (2006) 10.2514/1.20898

[18]

Cunha "Analysis of airfoil trailing edge heat transfer and its significance in thermal-mechanical design and durability" J. Turbomach. (2006) 10.1115/1.2220047

[19]

Effendy "DES study of blade trailing–edge cutback cooling performance with various lip thicknesses" J. Appl. Therm. Eng. (2016) 10.1016/j.applthermaleng.2015.11.103

[20]

Eliaz "Hot corrosion in gas turbine components" Eng. Fail. Anal. (2002) 10.1016/s1350-6307(00)00035-2

[21]

Gao "Investigations into film cooling and unsteady flow characteristics in a blade trailing–edge cutback region" J. Mech. Sci. Technol. (2018) 10.1007/s12206-018-0949-3

[22]

Goldstein "Flow and mass transfer performance in short pin-fin channels with different fin shapes" J. Rotating Mach. (1998) 10.1155/s1023621x98000104

[23]

Han "Fundamental gas turbine heat transfer" Therm. Sci. Eng. Appl. (2013) 10.1115/1.4023826

[24]

Advanced Cooling in Gas Turbines 2016 Max Jakob Memorial Award Paper

Je-Chin Han

Journal of Heat Transfer 2018 10.1115/1.4039644

[25]

Hepeng "Effects of blowing ratio measured by liquid crystal on heat transfer characteristics of trailing–edge cutback" Chinese J. Aeronaut. (2008) 10.1016/s1000-9361(08)60165-x

[26]

Horbach "Trailing–edge film cooling of gas turbine airfoils — external cooling performance of various internal pin fin configurations" J. Turbomach. (2011) 10.1115/1.4002964

[27]

Hwang "Detailed heat transfer characteristic comparison in straight and 90-deg turned trapezoidal ducts with pin-fin arrays" J. Heat Mass Transf. (1999) 10.1016/s0017-9310(99)00056-3

[28]

Hwang "Measurement of endwall heat transfer and pressure drop in a pin-fin wedge duct" J. Heat Mass Transf. (2002) 10.1016/s0017-9310(01)00193-4

[29]

Jaswal "Letterbox trailing–edge heat transfer : effects of blowing rate, reynolds number, and external turbulence on heat transfer and film cooling effectiveness" J. Turbomach. (2018)

[30]

Joo "Simulation of turbine blade trailing–edge cooling" Fluids Eng (2009) 10.1115/1.3054287

[31]

Liao "A numerical comparison of thermal performance of in-line pin–fins in a wedge duct with three kinds of coolant" J. Heat Mass Transf. (2014) 10.1016/j.ijheatmasstransfer.2014.06.010

[32]

Ling "Three-Dimensional velocity and scalar field measurements of an airfoil trailing–edge with slot film cooling : the effect of an internal structure in the slot" J. Turbomach. (2013)

[33]

Ling "Optimal turbulent schmidt number for rans modeling of trailing edge slot film cooling" Eng. Gas Turbines Power (2018)

[34]

Maktouf "An investigation of premature fatigue failures of gas turbine blade" Eng. Fail. Anal. (2015) 10.1016/j.engfailanal.2014.09.015

[35]

Martini "Experimental and numerical investigation of trailing–edge film cooling by circular coolant wall jets ejected from a slot with internal ribs arrays" J. Turbomach. (2004) 10.1115/1.1645531

[36]

Martini "Film cooling effectiveness and heat transfer on the trailing–edge cutback of gas turbine airfoils with various internal cooling" J. Turbomach. (2006) 10.1115/1.2103094

[37]

Martini "Detached eddy simulation of film cooling performance on the trailing–edge cutback of gas" J. Turbomach. (2006) 10.1115/1.2137739

[38]

Medic "Unsteady effects on trailing–edge cooling" J. Heat Transfer (2005) 10.1115/1.1860565

[39]

Metzger "Developing heat transfer in rectangular ducts with staggered arrays of short pin–fins" J. Heat Transfer (1982) 10.1115/1.3245188

[40]

Moon "Analysis and optimization of fan–shaped pin–fin in a rectangular cooling channel" J. Heat Mass Transf. (2014) 10.1016/j.ijheatmasstransfer.2013.12.085

[41]

Moskalenko "Estimation of gas turbine blades cooling efficiency" Procedia Eng. (2016) 10.1016/j.proeng.2016.06.716

[42]

Murata "Effects of surface geometry on film cooling performance at airfoil trailing–edge" J. Turbomach. (2013)

[43]

Murata "Arrangement effects of inclined teardrop-shaped dimples on film cooling performance of dimpled cutback surface at airfoil trailing–edge" J. Heat Mass Transf. (2017) 10.1016/j.ijheatmasstransfer.2016.11.081

[44]

Ravelli "Application of unsteady computational fluid dynamics methods to trailing–edge cutback film cooling" J. Turbomach. (2014) 10.1115/1.4028238

[45]

Ravelli "Stress-Blended eddy simulation of coherent unsteadiness in pressure side film cooling applied to a first stage turbine vane" J. Heat Transfer (2018) 10.1115/1.4039763

[46]

Ravelli "Dynamics of coherent structures and random turbulence in pressure side film cooling on a first stage turbine vane" J. Turbomach. (2018) 10.1115/1.4041602

[47]

Sahith "Development and analysis of thermal barrier coatings on gas turbine blades - A Review" Mater. Today Proc. (2018) 10.1016/j.matpr.2018.01.060

[48]

Schneider "Coherent structures in trailing-edge cooling and the challenge for turbulent heat transfer modelling" J. Heat and Fluid Flow (2015) 10.1016/j.ijheatfluidflow.2014.10.013

[49]

Schneider "Large-Eddy simulations of trailing-edge cutback film cooling at low blowing ratio" J. Heat and Fluid Flow (2010) 10.1016/j.ijheatfluidflow.2010.06.010

[50]

Schneider "Turbulent heat transfer and large coherent structures in trailing-edge cutback film cooling" Flow Turbul. Combust. (2012) 10.1007/s10494-011-9379-3

Showing 50 of 57 references

Metrics

24

Citations

57

References

Details

Published: Dec 01, 2019
Vol/Issue: 80
Pages: 108487
License: View

Authors

D-Wave Systems, 3033 Beta Avenue, Burnaby, BC V5G 4M9, Canada.

D

D.R. Marchant

Cite This Article

M. Effendy, Y.F. Yao, J. Yao, et al. (2019). Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles. International Journal of Heat and Fluid Flow, 80, 108487. https://doi.org/10.1016/j.ijheatfluidflow.2019.108487

Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles

You May Also Like