journal article May 01, 2017

Transitional flow regime heat transfer and pressure drop in an annulus with non-uniform wall temperatures

View at Publisher Save 10.1016/j.ijheatmasstransfer.2017.01.022
Topics

No keywords indexed for this article. Browse by subject →

References
32
[1]
Gnielinski "Turbulent heat transfer in annular spaces – a new comprehensive correlation" Heat Transf. Eng. (2015) 10.1080/01457632.2015.962953
[2]
Swamee "Optimum design of double pipe heat exchanger" Int. J. Heat Mass Transf. (2008) 10.1016/j.ijheatmasstransfer.2007.10.028
[3]
Dirker "Heat transfer coefficients in concentric annuli" J. Heat Transf. (2004) 10.1115/1.1517266
[4]
J.P. Meyer, Heat transfer in tubes in the transitional flow regime, in: Proceedings of the 15th International Heat Transfer Conference, Kyoto, Japan, Paper number KN03, 10–15 August, 2014. 10.1615/ihtc15.kn.000003
[5]
Olivier "Single-phase heat transfer and pressure drop of the cooling of water inside smooth tubes for transitional flow with different inlet geometries" Am. Soc. Heating Refrigerating Air-Conditioning Eng. (2010)
[6]
Nunner "Heat transfer and pressure drop in rough tubes" VDI – Forschungsheft (1956)
[7]
Obot "The role of transition in determining friction and heat transfer in smooth and rough passages" Int. J. Heat Mass Transf. (1990) 10.1016/0017-9310(90)90115-b
[8]
Withers "Tube-side heat transfer and pressure drop for tubes having helical internal ridging with turbulent/transitional flow of single phase fluid: Part 1 – single-helix ridging" Heat Transf. Eng. (1980) 10.1080/01457638008962750
[9]
Withers "Tube-side heat transfer and pressure drop for tubes having helical internal ridging with turbulent/transitional flow of single phase fluid: Part 2 – multiple-helix ridging" Heat Transf. Eng. (1980) 10.1080/01457638008962755
[10]
Manglik "Heat transfer and pressure drop correlations for twisted-tape inserts in isothermal tubes: Part 1 – laminar flows" J. Heat Transf. (1993) 10.1115/1.2911383
[11]
Ghajar "Heat transfer measurements and correlations in the transition for a circular tube with three different inlet configurations" Exp. Therm. Fluid Sci. (1994) 10.1016/0894-1777(94)90075-2
[12]
Ghajar "Pressure drop measurements in the transition region for a circular tube with three different inlet configurations" Exp. Therm. Fluid Sci. (1992) 10.1016/0894-1777(92)90062-a
[13]
Ghajar "Effect of inlet geometry and heating on the fully developed friction factor in the transition region of a horizontal tube" Exp. Therm. Fluid Sci. (1997) 10.1016/s0894-1777(97)00035-6
[14]
Olivier "Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part I - adiabatic pressure drops" Int. J. Heat Mass Transf. (2011) 10.1016/j.ijheatmasstransfer.2010.11.027
[15]
Olivier "Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part II – heat transfer" Int. J. Heat Mass Transf. (2011) 10.1016/j.ijheatmasstransfer.2010.11.026
[16]
Dirker "Inlet flow effects in micro-channels in the laminar and transitional regimes on single-phase heat transfer coefficients and friction factors" Int. J. Heat Mass Transf. (2014) 10.1016/j.ijheatmasstransfer.2014.05.048
[17]
M. Everts, R.S. Ayres, F.A.M. Houwer, C.P. Vanderwagen, N.M. Kotze, J.P. Meyer, The influence of surface roughness on heat transfer in the transitional flow regime, in: Proceedings of the 15th International Heat Transfer Conference, Kyoto, Japan, Paper number 8338, 10–15 August, 2014. 10.1615/ihtc15.cnv.008338
[18]
Kakaҫ (1987)
[19]
Hattori "Combined free and forced convection heat transfer for fully developed laminar flow in horizontal concentric annuli (numerical analysis)" JSME Trans. (1979) 10.1299/kikaib.45.227
[20]
Nguyen "Combined free and forced convection of water between horizontal concentric cylinders" J. Heat Transf. (1988)
[21]
Mohammed "Experimental study of forced and free convective heat transfer in the thermal entry region of horizontal concentric annuli" Int. Commun. Heat Mass Transf. (2010) 10.1016/j.icheatmasstransfer.2010.04.007
[22]
Ciampi "Mixed convection heat transfer in horizontal, concentric annuli for transitional flow conditions" Int. J. Heat Mass Transf. (1987) 10.1016/0017-9310(87)90003-2
[23]
Lu "Experimental investigation on flow characteristics in a narrow annulus" Heat Mass Transf. (2008) 10.1007/s00231-007-0268-1
[24]
Lu "Experimental investigation on heat transfer characteristics of water flow in a narrow annulus" Appl. Therm. Eng. (2008) 10.1016/j.applthermaleng.2007.03.019
[25]
VanZyl "Single-phase convective heat transfer and pressure drop coefficients in concentric annuli" Heat Transf. Eng. (2013) 10.1080/01457632.2013.763550
[26]
F.P.A. Prinsloo, J. Dirker, J.P. Meyer, Heat transfer and pressure drop characteristics in the annuli of tube-in tube heat exchangers (horizontal lay-out), in: Proceedings of the 15th International Heat Transfer Conference, Kyoto, Japan, Paper number 9225, 10–15 August, 2014. 10.1615/ihtc15.fcv.009225
[27]
R.E. Rayle, Influence of orifice geometry on static pressure measurements, ASME, Paper No. 59-A-234, 1959.
[28]
Popiel "Simple formulas for thermophysical properties of liquid water for heat transfer calculations (from 0°C to 150°C)" Heat Transf. Eng. (1998) 10.1080/01457639808939929
[29]
Moffat "Describing the uncertainty in experimental results" Exp. Therm. Fluid Sci. (1983)
[30]
Gnielinski "Heat transfer coefficients for turbulent flow in concentric annular ducts" Heat Transf. Eng. (2009) 10.1080/01457630802528661
[31]
Gnielinski "Heat Transfer in Laminar Flow" (2010)
[32]
Zhipeng "New correlative model for fully developed turbulent heat and mass transfer in circular and noncircular ducts" Trans. ASME J. Heat Transf. (2012)
Metrics
21
Citations
32
References
Details
Published
May 01, 2017
Vol/Issue
108
Pages
2239-2252
License
View
Cite This Article
Dickson D. Ndenguma, Jaco Dirker, Josua P. Meyer (2017). Transitional flow regime heat transfer and pressure drop in an annulus with non-uniform wall temperatures. International Journal of Heat and Mass Transfer, 108, 2239-2252. https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.022