Low-velocity impact of castor oil-based rigid polyurethane foams: Experiments, microstructure effects and constitutive modelling

Koohbor "Effect of specimen size, compressibility and inertia on the response of rigid polymer foams subjected to high velocity direct impact loading" Int J Impact Eng (2016) 10.1016/j.ijimpeng.2016.08.006

[2]

Li "Response of anisotropic polyurethane foam to compression at different loading angles and strain rates" Int J Impact Eng (2019) 10.1016/j.ijimpeng.2018.12.009

[3]

Avalle "Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram" Int J Impact Eng (2001) 10.1016/s0734-743x(00)00060-9

[4]

Shim "Two-dimensional response of crushable polyurethane foam to low velocity impact" Int J Impact Eng (2000) 10.1016/s0734-743x(99)00149-9

[5]

Chen "High-strain-rate compressive behavior of a rigid polyurethane foam with various densities" Exp Mech (2002) 10.1007/bf02411053

[6]

Zhang "Energy absorption and low velocity impact response of polyurethane foam filled pyramidal lattice core sandwich panels" Compos Struct (2014) 10.1016/j.compstruct.2013.09.040

[7]

The mechanical response of a syntactic polyurethane foam at low and high rates of strain

A. Pellegrino, V.L. Tagarielli, R. Gerlach et al.

International Journal of Impact Engineering 2015 10.1016/j.ijimpeng.2014.08.005

[8]

Mane "Mechanical property evaluation of polyurethane foam under quasi-static and dynamic strain rates- An experimental study" Procedia Eng (2017) 10.1016/j.proeng.2016.12.160

[9]

Hwang "Dynamic compressive behavior of rigid polyurethane foam with various densities under different temperatures" Int J Mech Sci (2020) 10.1016/j.ijmecsci.2020.105657

[10]

Zhang "Compressive properties and energy absorption of rigid polyurethane foam" J Phys: Conf Ser (2022)

[11]

Helling "Use of life cycle assessment to characterize the environmental impacts of polyol production options" Green Chem (2009) 10.1039/b815833a

[12]

Recupido "Rigid composite bio-based polyurethane foams: From synthesis to LCA analysis" Polymer (2023) 10.1016/j.polymer.2023.125674

[13]

Lee "Bio-based polyurethane foams with castor oil based multifunctional polyols for improved compressive properties" Polym (Basel) (2021) 10.3390/polym13040576

[14]

Life Cycle Assessment of vegetable oil based polyols for polyurethane production

Anda Fridrihsone, Francesco Romagnoli, Vladimirs Kirsanovs et al.

Journal of Cleaner Production 2020 10.1016/j.jclepro.2020.121403

[15]

Castor oil as a potential renewable resource for the production of functional materials

Egid B. Mubofu

Sustainable Chemical Processes 2016 10.1186/s40508-016-0055-8

[16]

Cabulis "Recent developments in the sustainability of the production of polyurethane foams from polyols based on the first- to the fourth-generation of biomass feedstock" Curr Opin Green Sustain Chem (2023)

[17]

Jeyanthi "Experimental and numerical study of rigid polyurethane foams for mechanical characteristics using finite element analysis" J Phys: Conf Ser (2023)

[18]

Singh "A comprehensive review of castor oil-derived renewable and sustainable industrial products" Environ Progress Sustain Energy (2023) 10.1002/ep.14008

[19]

Srinivasan "Improved thermal and mechanical properties of water-blown rigid polyurethane foams synthesized with renewable castor oil and toluene diisocyanate-based trifunctional polyols" Cell Polym (2023) 10.1177/02624893231204620

[20]

Soares "Castor-oil biobased foam: The effect of the composition on the physical and mechanical properties via a statistical mixture design" RSC Sustain (2024) 10.1039/d3su00374d

[21]

Lavazza "Rigid polyurethane foams from commercial castor oil resins" Polym Test (2024) 10.1016/j.polymertesting.2024.108457

[22]

Mourão "The use of castor oil polyurethane foam in impact limiters for radioactive materials packages" Int J Radioact Mater Transp (2003)

[23]

Martin "Hierarchical structure of aluminium foams and relation to compression behaviour" High Temp Mater Process (2007) 10.1515/htmp.2007.26.4.291

[24]

Compressive behavior and deformation mechanisms of rigid polymeric foams: A review

Foad Rahimidehgolan, William Altenhof

Composites Part B: Engineering 2023 10.1016/j.compositesb.2023.110513

[25]

Elliott "In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography" J Mater Sci (2002) 10.1023/a:1014920902712

[26]

Kartal "Three-dimensional in situ observations of compressive damage mechanisms in syntactic foam using X-ray microcomputed tomography" J Mater Sci (2017) 10.1007/s10853-017-1177-4

[27]

Patterson "Morphological and performance measures of polyurethane foams using X-Ray CT and mechanical testing" Microsc Microanal (2014) 10.1017/s1431927614000993

[28]

De Schryver "Motion compensated micro-CT reconstruction for in-situ analysis of dynamic processes" Sci Rep (2018) 10.1038/s41598-018-25916-5

[29]

Zhang "Impact properties of uniaxially thermoformed auxetic foams" Int J Impact Eng (2022) 10.1016/j.ijimpeng.2022.104176

[30]

Katsamenis "A high-throughput 3D X-ray histology facility for biomedical research and preclinical applications [version 2; peer review: 3 approved, 1 approved with reservations]" Wellcome Open Res (2023)

[31]

Roh "Failure of classical elasticity in auxetic foams" AIP Adv (2013) 10.1063/1.4802925

[32]

Rinde "Poisson’s ratio for rigid plastic foams" J Appl Polym Sci (1970) 10.1002/app.1970.070140801

[33]

Fiji: an open-source platform for biological-image analysis

Johannes Schindelin, Ignacio Arganda-Carreras, Erwin Frise et al.

Nature Methods 2012 10.1038/nmeth.2019

[34]

de Kergariou "The influence of the humidity on the mechanical properties of 3D printed continuous flax fibre reinforced poly(lactic acid) composites" Composites A (2022) 10.1016/j.compositesa.2022.106805

[35]

Xing "Crushing responses of expanded polypropylene foam" Polym (Basel) (2023) 10.3390/polym15092059

[36]

Evaluation of cushioning properties of plastic foams from compressive measurements

Joseph Miltz, Gad Gruenbaum

Polymer Engineering & Science 1981 10.1002/pen.760211505

[37]

Li "Compressive strain at the onset of densification of cellular solids" J Cell Plast (2006) 10.1177/0021955x06063519

[38]

Kim "Modeling of elasto-viscoplastic behavior for polyurethane foam under various strain rates and temperatures" Compos Struct (2017) 10.1016/j.compstruct.2017.08.032

[39]

Viot "Hydrostatic compression on polypropylene foam" Int J Impact Eng (2009) 10.1016/j.ijimpeng.2008.11.010

[40]

Park "Polymeric foams for cryogenic temperature application: Temperature range for non-recovery and brittle-fracture of microstructure" Compos Struct (2016) 10.1016/j.compstruct.2015.10.002

[41]

Shim "Static and impact crushing of layered foam-plate systems" Int J Mech Sci (1997) 10.1016/0020-7403(96)00010-0

[42]

Tu "Plastic deformation modes in rigid polyurethane foam under static loading" Int J Solids Struct (2001) 10.1016/s0020-7683(01)00213-x

[43]

Ferreira "Simple preparation of cellulosic lightweight materials from eucalyptus pulp" ACS Sustain Chem Eng (2018) 10.1021/acssuschemeng.8b03071

[44]

Bolintineanu "Anisotropy evolution of elastomeric foams during uniaxial compression measured via in-situ X-ray computed tomography" Mater (2021)

[45]

Park "Variation of mechanical characteristics of polyurethane foam: Effect of test method" Mater (Basel) (2019) 10.3390/ma12172672

[46]

Xiao "Mechanical performance and cushioning energy absorption characteristics of rigid polyurethane foam at low and high strain rates" Polym Test (2022) 10.1016/j.polymertesting.2022.107531

[47]

A Threshold Selection Method from Gray-Level Histograms

Nobuyuki Otsu

IEEE Transactions on Systems, Man, and Cybernetics 1979 10.1109/tsmc.1979.4310076

[48]

Ghazi "Computed tomography based modelling of the behaviour of closed cell metallic foams using a shell approximation" Mater Des (2020) 10.1016/j.matdes.2020.108866

[49]

Kosmela "Microstructure–property relationship of polyurethane foams modified with baltic sea biomass: Microcomputed tomography vs. scanning electron microscopy" Materials (2020) 10.3390/ma13245734

[50]

Zhang "Topological characteristics and mechanical properties of uniaxially thermoformed auxetic foam" Mater Des (2021) 10.1016/j.matdes.2021.110139

Showing 50 of 63 references

Metrics

7

Citations

63

References

Details

Published: Feb 01, 2025
Vol/Issue: 196
Pages: 105156
License: View

Authors

Department of Physics and Astronomy, University of Pennsylvania, Philadelphia, Pennsylvania 19104, USA

Fernando Alvarez-Borges

O

Orestis L. Katsamenis

μ-VIS X-ray Imaging Centre, Faculty of Engineering and Physical Sciences, University of Southampton, Southampton SO17 1BJ, UK

Bristol Composites Institute (ACCIS), University of Bristol, BS8 1TR Bristol, U.K.

Cite This Article

Jacopo Lavazza, Qicheng Zhang, Charles de Kergariou, et al. (2025). Low-velocity impact of castor oil-based rigid polyurethane foams: Experiments, microstructure effects and constitutive modelling. International Journal of Impact Engineering, 196, 105156. https://doi.org/10.1016/j.ijimpeng.2024.105156

Low-velocity impact of castor oil-based rigid polyurethane foams: Experiments, microstructure effects and constitutive modelling

You May Also Like