journal article Aug 01, 2026

Performance evaluation of the multi-layer composite against ballistic impact: Experimental and numerical studies

View at Publisher Save 10.1016/j.ijimpeng.2026.105730
Topics

No keywords indexed for this article. Browse by subject →

References
74
[1]
Experimental and numerical analysis of ballistic impact response of fiber-reinforced composite/metal composite target

Yalun Dong, Lihong Yang, Ziqi Jin et al.

Composite Structures 2022 10.1016/j.compstruct.2022.115776
[2]
Analytical and numerical investigation of polyurea layered aluminium plates subjected to high velocity projectile impact

Damith Mohotti, Tuan Ngo, Sudharshan N. Raman et al.

Materials & Design 2015 10.1016/j.matdes.2015.05.036
[3]
Dynamic behaviour of multi-layer composite against single and multiple projectile impact loading

Sobhan Pattajoshi, Sonalisa Ray, Yugal Kishor Joshi

Theoretical and Applied Fracture Mechanics 2024 10.1016/j.tafmec.2023.104189
[4]
Kapoor "Optimization of multi-layered composites against ballistic impact: A mesoscale approach" Compos Struct (2024) 10.1016/j.compstruct.2024.118097
[5]
Impact fatigue, multiple and repeated low-velocity impacts on FRP composites: A review

Mojtaba Sadighi, Rene Alderliesten

Composite Structures 2022 10.1016/j.compstruct.2022.115962
[6]
Kueh "Single and repetitive low-velocity impact responses of sandwich composite structures with different skin and core considerations: A review" Case Stud Constr Mater (2023)
[7]
Haifeng "Mechanical behavior of reinforced concrete subjected to impact loading" Mech Mater (2009) 10.1016/j.mechmat.2009.05.008
[8]
Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths

S.J. Hanchak, M.J. Forrestal, E.R. Young et al.

International Journal of Impact Engineering 1992 10.1016/0734-743x(92)90282-x
[9]
Ballistic performances of concrete targets subjected to long projectile impact

Abhishek Rajput, M.A. Iqbal, N.K. Gupta

Thin-Walled Structures 2018 10.1016/j.tws.2017.01.021
[10]
Ballistic performance of plain, reinforced and pre-stressed concrete slabs under normal impact by an ogival-nosed projectile

Abhishek Rajput, M.A. Iqbal

International Journal of Impact Engineering 2017 10.1016/j.ijimpeng.2017.03.008
[11]
Improvement of the dynamic failure behavior of concrete subjected to projectile impact using user-defined material model

Wonjun Shin, Hwisan Park, Jihoon Han

Construction and Building Materials 2022 10.1016/j.conbuildmat.2022.127343
[12]
Tensile failure of concrete at high loading rates: New test data on strength and fracture energy from instrumented spalling tests

J. Weerheijm, J.C.A.M. Van Doormaal

International Journal of Impact Engineering 2007 10.1016/j.ijimpeng.2006.01.005
[13]
Numerical predictions of cratering and scabbing in concrete slabs subjected to projectile impact using a modified version of HJC material model

Xiangzhen Kong, Qin Fang, Hao Wu et al.

International Journal of Impact Engineering 2016 10.1016/j.ijimpeng.2016.04.014
[14]
Dynamic fracture analysis of multi-layer composites using an improved RHT model

Sobhan Pattajoshi, Sonalisa Ray

Engineering Fracture Mechanics 2025 10.1016/j.engfracmech.2025.111220
[15]
Dynamic properties and SPH simulation of functionally graded cementitious composite subjected to repeated penetration

Jianzhong Lai, Huifang Wang, Haoruo Yang et al.

Construction and Building Materials 2017 10.1016/j.conbuildmat.2017.04.023
[16]
Penetration experiments and simulation of three-layer functionally graded cementitious composite subjected to multiple projectile impacts

Jianzhong Lai, Haoruo Yang, Huifang Wang et al.

Construction and Building Materials 2019 10.1016/j.conbuildmat.2018.11.154
[17]
Kishen JC, Ramaswamy A, Ray S et al. Computational modeling of dynamic fracture of layered composite under various strain-rate loading.
[18]
Pattajoshi "Dynamic fracture behavior of layered composite under high strain rate loading" (2022)
[19]
Balags P, Vretblad B. Model tests on composite slabs of light gauge metal and concrete subjected to blast loading. In: Proceedings of the second symposium on the interaction of non-nuclear munitions with structures. 1985, p. 143–8.
[20]
Tedesco "Dynamic response of layered structures subject to blast effects of non-nuclear weaponry" Comput Struct (1987) 10.1016/0045-7949(87)90238-0
[21]
Tedesco (1988)
[22]
Tedesco "Wave propagation through layered systems" Comput Struct (1989) 10.1016/0045-7949(89)90351-9
[23]
Landis "Wave propagation in layered structures (Final report)" Univers Energy Syst Inc, U. S Air Force Grad Stud Summer Support Program (1987)
[24]
Shen "Functionally-graded fiber-reinforced cement composite: Processing, microstructure, and properties" Cem Concr Compos (2008) 10.1016/j.cemconcomp.2008.02.002
[25]
Roesler "Fracture behavior and properties of functionally graded fiber-reinforced concrete" (2008)
[26]
Río "Exploring the potential of the functionally graded SCCC for developing sustainable concrete solutions" J Adv Concr Technol (2015) 10.3151/jact.13.193
[27]
Mastali "Experimental assessment of functionally graded reinforced concrete (FGRC) slabs under drop weight and projectile impacts" Constr Build Mater (2015) 10.1016/j.conbuildmat.2015.07.153
[28]
Quek "Development of functionally-graded cementitious panel against high-velocity small projectile impact" Int J Impact Eng (2010) 10.1016/j.ijimpeng.2010.02.002
[29]
Dancygier "High-performance concrete engineered for protective barriers" Philos Trans Royal Soc A (2016)
[30]
Katunin "Damage progression in fibre reinforced polymer composites subjected to low-velocity repeated impact loading" Compos Struct (2020) 10.1016/j.compstruct.2020.112735
[31]
Jang "Impact behavior and impact-fatigue testing of polymer composites" Compos Sci Technol (1992) 10.1016/0266-3538(92)90103-a
[32]
Azouaoui "Modelling of damage and failure of glass/epoxy composite plates subject to impact fatigue" Int J Fatigue (2001) 10.1016/s0142-1123(01)00050-0
[33]
Baucom "Low-velocity impact damage progression in woven E-glass composite systems" Compos Part A: Appl Sci Manuf (2005) 10.1016/j.compositesa.2004.07.008
[34]
Cheng "Progressive damage modelling and fatigue life prediction of plain-weave composite laminates with low-velocity impact damage" Compos Struct (2021) 10.1016/j.compstruct.2021.114262
[36]
Johnson "Crack growth rate in impact fatigue and in programmed variable amplitude loading fatigue" Eng Fract Mech (1990) 10.1016/0013-7944(90)90377-s
[37]
Kawaguchi "Impact fatigue properties of glass fiber-reinforced thermoplastics" Compos Sci Technol (2004) 10.1016/j.compscitech.2003.08.007
[38]
Khan "Low velocity impact fatigue studies on glass epoxy composite laminates with varied material and test parameters-effect of incident energy and fibre volume fraction" J Reinf Plast Compos (1995) 10.1177/073168449501401102
[39]
Lhymn "Impact fatigue of PPS/glass composite—microscopy" J Mater Sci Lett (1985) 10.1007/bf00721355
[40]
Prakash "Understanding fatigue damage progression in low velocity impacted CFRP laminates through stiffness measurements" (2015)
[41]
Ray "Impact fatigue behaviour of vinylester resin matrix composites reinforced with alkali treated jute fibres" Compos Part A: Appl Sci Manuf (2002) 10.1016/s1359-835x(01)00096-3
[42]
Roy "Impact fatigue of glass fibre–vinylester resin composites" Compos Part A: Appl Sci Manuf (2001) 10.1016/s1359-835x(00)00151-2
[43]
Sarkar "Effect of the defect concentration on the impact fatigue endurance of untreated and alkali treated jute–vinylester composites under normal and liquid nitrogen atmosphere" Compos Sci Technol (2004) 10.1016/j.compscitech.2004.03.017
[44]
Varghese "Low velocity impact, fatigue and visco-elastic behaviour of carbon/E-glass intra-ply fibre-reinforced nano-silica toughened epoxy composite" Silicon (2021) 10.1007/s12633-020-00566-3
[45]
Zhang "Compressive fatigue behavior of low velocity impacted and quasi-static indented CFRP laminates" Compos Struct (2015) 10.1016/j.compstruct.2015.08.046
[46]
Tephra cushioning of ballistic impacts: Quantifying building vulnerability through pneumatic cannon experiments and multiple fragility curve fitting approaches

George T. Williams, Ben M. Kennedy, David Lallemant et al.

Journal of Volcanology and Geothermal Research 2019 10.1016/j.jvolgeores.2019.106711
[47]
Penetration experiments and simulation of three-layer functionally graded cementitious composite subjected to multiple projectile impacts

Jianzhong Lai, Haoruo Yang, Huifang Wang et al.

Construction and Building Materials 2019 10.1016/j.conbuildmat.2018.11.154
[48]
Bornstein "Physical mechanisms for near-field blast mitigation with fluid containers: Effect of container geometry" Int J Impact Eng (2016) 10.1016/j.ijimpeng.2016.04.015
[49]
Development of materials and structures for shielding applications against Blast and Ballistic impact: A Detailed Review

Anand Pai, Chandrakant R. Kini, Satish Shenoy B.

Thin-Walled Structures 2022 10.1016/j.tws.2022.109664
[50]
Quasi-LPV Modeling of Guided Projectile Pitch Dynamics through State Transformation Technique

G.M. Vinco, S. Theodoulis, O. Sename et al.

IFAC-PapersOnLine 2022 10.1016/j.ifacol.2022.11.288

Showing 50 of 74 references

Metrics
0
Citations
74
References
Details
Published
Aug 01, 2026
Vol/Issue
214
Pages
105730
License
View
Cite This Article
Sobhan Pattajoshi, Shashwat Kapoor, Sonalisa Ray, et al. (2026). Performance evaluation of the multi-layer composite against ballistic impact: Experimental and numerical studies. International Journal of Impact Engineering, 214, 105730. https://doi.org/10.1016/j.ijimpeng.2026.105730
Related

You May Also Like