Cr addition-mediated simultaneous achievement of excellent strength and plasticity in non-equiatomic Nb-Ti-Zr-Ta-base refractory high-entropy alloys

Tan "Additively manufactured oxide dispersion strengthened nickel-based superalloy with superior high temperature properties" Virtual Phys. Prototyp. (2020) 10.1080/17452759.2020.1848283

[3]

Strondl "Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)" Mater. Sci. Technol. (2013) 10.1179/026708309x12468927349451

[4]

Senkov "Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys" Intermetallics (2011) 10.1016/j.intermet.2011.01.004

[5]

Tseng "Effects of Mo, Nb, Ta, Ti, and Zr on Mechanical Properties of Equiatomic Hf-Mo-Nb-Ta-Ti-Zr Alloys" Entropy (2018) 10.3390/e21010015

[6]

Senkov "Mechanical properties of low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system" Mater. Sci. Eng. A (2013) 10.1016/j.msea.2012.12.018

[7]

Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy

O.N. Senkov, J.M. Scott, S.V. Senkova et al.

Journal of Alloys and Compounds 2011 10.1016/j.jallcom.2011.02.171

[8]

Senkov "Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy" J. Mater. Sci. (2012) 10.1007/s10853-012-6260-2

[9]

Goodfellow "Strengthening mechanisms in polycrystalline nickel-based superalloys" Mater. Sci. Technol. (2018) 10.1080/02670836.2018.1461594

[10]

Ma "Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy" Acta Mater. (2014) 10.1016/j.actamat.2013.09.042

[11]

Suzuki "Precipitation strengthening of a Mg-Al-Ca–based AXJ530 Die-cast alloy" Metall. Mater. Trans. A (2008) 10.1007/s11661-007-9455-4

[12]

Wang "Microstructures and mechanical properties of HfNbTaTiZrW and HfNbTaTiZrMoW refractory high-entropy alloys" J. Alloy. Compd. (2019) 10.1016/j.jallcom.2019.06.138

[13]

Wan "Mechanical properties and phase stability of WTaMoNbTi refractory high-entropy alloy at elevated temperatures" Acta Metall. Sin. (Engl. Lett. ) (2021) 10.1007/s40195-021-01263-9

[14]

Yurchenko "Effect of Cr and Zr on phase stability of refractory Al-Cr-Nb-Ti-V-Zr high-entropy alloys" J. Alloy. Compd. (2018) 10.1016/j.jallcom.2018.05.099

[15]

Zhang "Senary refractory high-entropy alloy CrxMoNbTaVW" Calphad (2015) 10.1016/j.calphad.2015.09.007

[16]

Xiang "Effect of Cr content on microstructure and properties of Mo0.5VNbTiCrx high-entropy alloys" J. Alloy. Compd. (2020) 10.1016/j.jallcom.2019.153352

[17]

Gao "Microstructure characteristics and mechanical properties of Hf0.5Mo0.5NbTiZr refractory high entropy alloy with Cr addition" Int. J. Refract. Met. Hard Mater. (2021) 10.1016/j.ijrmhm.2020.105405

[18]

Wang "(TiZrNbTa)-Mo high-entropy alloys: dependence of microstructure and mechanical properties on Mo concentration and modeling of solid solution strengthening" Intermetallics (2018) 10.1016/j.intermet.2018.01.017

[19]

Takeuchi "Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element" Mater. Trans. (2005) 10.2320/matertrans.46.2817

[20]

Guo "Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase" Prog. Nat. Sci. Mater. Int. (2011) 10.1016/s1002-0071(12)60080-x

[21]

Edwards "The lattice dimensions of the AB2 laves phases" Metall. Trans. (1972) 10.1007/bf02643019

[22]

Zhu "Enthalpies of formation of binary Laves phases" Intermetallics (2002) 10.1016/s0966-9795(02)00030-4

[23]

Stein "Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability" Intermetallics (2004) 10.1016/j.intermet.2004.02.010

[24]

Fang "Effect of Cr content on microstructure characteristics and mechanical properties of ZrNbTaHf0.2Crx refractory high entropy alloy" J. Alloy. Compd. (2022) 10.1016/j.jallcom.2022.166593

[25]

Wang "Phase selection in high-entropy alloys: from nonequilibrium to equilibrium" JOM (2014) 10.1007/s11837-014-0953-8

[26]

Yurchenko "Laves-phase formation criterion for high-entropy alloys" Mater. Sci. Technol. (2016) 10.1080/02670836.2016.1153277

[27]

Guo "Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys" J. Appl. Phys. (2011) 10.1063/1.3587228

[28]

Wang "Atomic-size effect and solid solubility of multicomponent alloys" Scr. Mater. (2015) 10.1016/j.scriptamat.2014.09.010

[29]

Chattopadhyay "Phase prediction in high entropy alloys – a kinetic approach" Acta Mater. (2018) 10.1016/j.actamat.2018.05.002

[30]

Yang "Phase stability of low-density, multiprincipal component alloys containing aluminum, magnesium, and lithium" JOM (2014) 10.1007/s11837-014-1059-z

[31]

King "Predicting the formation and stability of single phase high-entropy alloys" Acta Mater. (2016) 10.1016/j.actamat.2015.11.040

[32]

King "High temperature, low neutron cross-section high-entropy alloys in the Nb-Ti-V-Zr system" Acta Mater. (2019) 10.1016/j.actamat.2019.01.006

[33]

D.J.M. King A.G. D.J.M. King, A.G. McGregor, Alloy Search and Predict (ASAP) (2015). 〈http://www.AlloyASAP.com〉.

[34]

Senkov "Compositional effect on microstructure and properties of NbTiZr-based complex concentrated alloys" Acta Mater. (2018) 10.1016/j.actamat.2018.03.065

[35]

Huang "Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys" J. Alloy. Compd. (2022) 10.1016/j.jallcom.2022.165187

[36]

〈https://www.crct.polymtl.ca/fact/pdweb.php〉.

[37]

Wang "Designing VxNbMoTa refractory high-entropy alloys with improved properties for high-temperature applications" Scr. Mater. (2021) 10.1016/j.scriptamat.2020.09.027

[38]

Juan "Simultaneously increasing the strength and ductility of a refractory high-entropy alloy via grain refining" Mater. Lett. (2016) 10.1016/j.matlet.2016.08.060

[39]

Senkov "Effect of cold deformation and annealing on the microstructure and tensile properties of a HfNbTaTiZr refractory high entropy alloy" Metall. Mater. Trans. A (2018) 10.1007/s11661-018-4646-8

[40]

Neumann "Self-diffusion and impurity diffusion in pure metals" Handb. Exp. Data (2009)

[41]

Iqbal "Real-time observation of grain nucleation and growth during solidification of aluminium alloys" Acta Mater. (2005) 10.1016/j.actamat.2005.02.045

[42]

Yi "Excellent strength-ductility synergy in a novel single-phase equiatomic CoFeNiTiV high entropy alloy" Int. J. Refract. Met. Hard Mater. (2021) 10.1016/j.ijrmhm.2020.105416

[43]

Yi "Novel, equimolar, multiphase CoCuNiTiV high-entropy alloy: phase component, microstructure, and compressive properties" Met. Mater. Int. (2021) 10.1007/s12540-020-00923-2

[44]

Wang "Microstructure and mechanical properties of non-equilibrium solidified CoCrFeNi high entropy alloy" Mater. Chem. Phys. (2018) 10.1016/j.matchemphys.2017.06.037

[45]

Chen "Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy" J. Alloy. Compd. (2019) 10.1016/j.jallcom.2019.04.291

[46]

Liu "Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering" J. Mater. Sci. Technol. (2019) 10.1016/j.jmst.2019.07.013

[47]

Wang "Effect of Cr incorporation on the mechanical properties of HfMoTiZrCr, HfMoNbZrCr, and HfMoNbTiCr refractory high-entropy alloys" Met. Mater. Int. (2022) 10.1007/s12540-021-01142-z

[48]

Rabadia "Laves phase precipitation in Ti-Zr-Fe-Cr alloys with high strength and large plasticity" Mater. Des. (2018) 10.1016/j.matdes.2018.05.035

[49]

Couzinie "Comprehensive data compilation on the mechanical properties of refractory high-entropy alloys" Data Brief. (2018) 10.1016/j.dib.2018.10.071

[50]

Yurchenko "Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy alloys" Mater. Sci. Eng. A (2017) 10.1016/j.msea.2017.08.019

Showing 50 of 68 references

Cited By

43

Rapid screening strategy for Ti-rich multi-principal element alloys with improved strength-plasticity synergy

liuqing Chen, Zixiang Ao · 2026

Journal of Alloys and Compounds

A review on recent progress of refractory high entropy alloys: From fundamental research to engineering applications

Longchao Zhuo, Yixing Xie · 2024

Journal of Materials Research and T...

Metrics

43

Citations

68

References

Details

Published: Jun 01, 2023
Vol/Issue: 946
Pages: 169423
License: View

Authors

Huaqiao University

Department of Pharmaceutical Chemistry, University of California, San Francisco, CA 94143

Laboratory of Advanced Multicomponent Materials, School of Mechanical Engineering, Jiangsu University of Technology, Changzhou 213001, P. R. China

Funding

Changzhou Science and Technology Bureau

Cite This Article

Jiarui Wang, Feng Jiang, Lu Wang, et al. (2023). Cr addition-mediated simultaneous achievement of excellent strength and plasticity in non-equiatomic Nb-Ti-Zr-Ta-base refractory high-entropy alloys. Journal of Alloys and Compounds, 946, 169423. https://doi.org/10.1016/j.jallcom.2023.169423

Cr addition-mediated simultaneous achievement of excellent strength and plasticity in non-equiatomic Nb-Ti-Zr-Ta-base refractory high-entropy alloys

You May Also Like