Clean production and properties of geopolymer concrete; A review

Y.H. Mugahed Amran; Rayed Alyousef; Hisham Alabduljabbar; Mohamed El-Zeadani

doi:10.1016/j.jclepro.2019.119679

journal article Apr 01, 2020

Clean production and properties of geopolymer concrete; A review

Y.H. Mugahed Amran Rayed Alyousef

Hisham Alabduljabbar Mohamed El-Zeadani

Journal of Cleaner Production Vol. 251 pp. 119679 · Elsevier BV

View at Publisher Save 10.1016/j.jclepro.2019.119679

Topics

No keywords indexed for this article. Browse by subject →

References

272

[1]

ACI 233R-95 Committee Report, 1997. GGBFS as a Cementitious Constituents in Concrete, ACI Manual of Concrete Practice, (Part I).

[2]

Adam (2009)

[3]

Adams "American coal ash association production and use news release" Am. Coal Ash Assoc. (2017)

[4]

Adewuyi "Compressive strength and abrasion resistance of concretes under varying exposure conditions" Open J. Civ. Eng. (2017) 10.4236/ojce.2017.71005

[5]

Aggarwal "Self-compacting concrete-procedure for mix design. Leonardo Electron" J. Pract. Technol. (2008)

[6]

Aharon-Shalom "Tensile strength and bonding characteristics of self-compacting concrete" J. Electrochem. Soc. (1982)

[7]

Ahmari, S., Zhang, L., 2012. Production of eco-friendly bricks from copper mine tailings through geopolymerization. Constr. Build. Mater. 29, 323–331. https://doi.org/10.1016/j.conbuildmat.2011.10.048. 10.1016/j.conbuildmat.2011.10.048

[8]

Ajay "Properties and industrial applications of rice husk: a review" Int. J. Emerg. Technol. Adv. Eng. (2012)

[9]

Al-Majidi, M.H., Lampropoulos, A., Cundy, A.B., 2017. Tensile properties of a novel fibre reinforced geopolymer composite with enhanced strain hardening characteristics. Compos. Struct. 168, 402–427. https://doi.org/10.1016/j.compstruct.2017.01.085. 10.1016/j.compstruct.2017.01.085

[10]

Al-Mulla "Enhance concrete performance using natural materials as partial replacement of cement" Acad. Sci. J. (2010)

[11]

Al-Qadri "Effect of some admixtures on heat of hydration reaction of cement pastes produced in Yemen, Saudi Arabia, and Egypt" J. Eng. Sci. (2009)

[12]

Alam, S.Y., Saliba, J., Loukili, A., 2014. Fracture examination in concrete through combined digital image correlation and acoustic emission techniques. Constr. Build. Mater. 69, 232–242. https://doi.org/10.1016/j.conbuildmat.2014.07.044. 10.1016/j.conbuildmat.2014.07.044

[13]

Aldea, C.-M., Young, F., Wang, K., Shah, S.P., 2000. Effects of curing conditions on properties of concrete using slag replacement. Cement Concr. Res. 30, 465–472. https://doi.org/10.1016/S0008-8846(00)00200-3. 10.1016/s0008-8846(00)00200-3

[14]

Ali (2015)

[15]

Almeida, A.E.F.S., Tonoli, G.H.D., Santos, S.F., Savastano, H., 2013. Improved durability of vegetable fiber reinforced cement composite subject to accelerated carbonation at early age. Cement Concr. Compos. 42, 49–58. https://doi.org/10.1016/j.cemconcomp.2013.05.001. 10.1016/j.cemconcomp.2013.05.001

[16]

Alomayri, T., Shaikh, F.U.A., Low, I.M., 2014a. Effect of fabric orientation on mechanical properties of cotton fabric reinforced geopolymer composites. Mater. Des. 57, 360–365. https://doi.org/10.1016/j.matdes.2014.01.036. 10.1016/j.matdes.2014.01.036

[17]

Alomayri, T., Shaikh, F.U.A., Low, I.M., 2014b. Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites. Compos. B Eng. 60, 36–42. https://doi.org/10.1016/j.compositesb.2013.12.036. 10.1016/j.compositesb.2013.12.036

[18]

American Concrete Institute "High-volume fly ash system: the concrete solution for sustainable development" ACI Mater. J. Am. Concr. Inst. (2000)

[19]

Ananthayya "Effect of partial replacement of sand by iron ore tailing (IOT) and cement by ground granulated blast furnace slag (GGBFS) on the compressive strength of concrete" Int. J. Eng. (2014)

[20]

Anuar "Strength characteristics of geopolymer concrete containing recycled concrete aggregate" Int. J. Civ. Environ. Eng. (2011)

[21]

Anuradha "Optimization of molarity on workable self-compacting geopolymer concrete and strength study on SCGC by replacing fly ash with silica fume and GGBFS" Int. J. Adv. Struct. Geotech. Eng. (2014)

[22]

AS, A.S., 2009. Concrete Structures. AS3600-2001. Sydney (Australia).

[23]

ASTM, 2012. Standard specification for silica fume used in cementitious mixtures. Astm C1240 1–7. https://doi.org/10.1520/C1240-14.2.

[24]

ASTMC (2004)

[25]

ASTMC115-96 (1996)

[26]

ASTMC666 (1997)

[27]

ASTME119, 2012. Standard Test Methods for Fire Tests of Building Construction and Materials. (West Conshohocken, PA).

[28]

Atiş, C.D., Özcan, F., Kılıç, A., Karahan, O., Bilim, C., Severcan, M.H., 2005. Influence of dry and wet curing conditions on compressive strength of silica fume concrete. Build. Environ. 40, 1678–1683. https://doi.org/10.1016/j.buildenv.2004.12.005. 10.1016/j.buildenv.2004.12.005

[29]

Azreen, N.M., Rashid, R.S.M., Haniza, M., Voo, Y.L., Mugahed Amran, Y.H., 2018. Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass. Constr. Build. Mater. 172, 370–377. https://doi.org/10.1016/j.conbuildmat.2018.03.243. 10.1016/j.conbuildmat.2018.03.243

[30]

Bakharev "Resistance of geopolymer materials to acid attack" Cement Concr. Res. (2005) 10.1016/j.cemconres.2004.06.005

[31]

Bakri "Review on fly ash-based geopolymer concrete without Portland Cement" J. Eng. Technol. Res. (2011)

[32]

Bakri (2011)

[33]

Mustafa Al Bakri "Effect of Na 2 SiO 3/NaOH ratios and NaOH molarities on compressive strength of fly-ash-based geopolymer" ACI Mater. J. (2012)

[34]

Baltazar, L., Santana, J., Lopes, B., Paula Rodrigues, M., Correia, J.R., 2014. Surface skin protection of concrete with silicate-based impregnations: influence of the substrate roughness and moisture. Constr. Build. Mater. 70, 191–200. https://doi.org/10.1016/j.conbuildmat.2014.07.071. 10.1016/j.conbuildmat.2014.07.071

[35]

Basha S, M., Reddy Ch, B., K, V., 2016. Strength behaviour of geopolymer concrete replacing fine aggregates by M- sand and E-waste. Int. J. Eng. Trends Technol. 40, 401–407. https://doi.org/10.14445/22315381/ijett-v40p265. 10.14445/22315381/ijett-v40p265

[36]

Bashar "Engineering properties and fracture behaviour of high volume palm oil fuel ash based fibre reinforced geopolymer concrete" Constr. Build. Mater. (2016) 10.1016/j.conbuildmat.2016.02.022

[37]

Bernal, S.A., Mejía de Gutiérrez, R., Provis, J.L., 2012. Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends. Constr. Build. Mater. 33, 99–108. https://doi.org/10.1016/j.conbuildmat.2012.01.017. 10.1016/j.conbuildmat.2012.01.017

[38]

Bharath, K.N., Basavarajappa, S., 2014. Flammability characteristics of chemical treated woven natural fabric reinforced phenol formaldehyde composites. Procedia Mater. Sci. 5, 1880–1886. https://doi.org/10.1016/j.mspro.2014.07.507. 10.1016/j.mspro.2014.07.507

[39]

Bhavsar "Workability properties of geopolymer concrete using accelerator and silica fume as an admixture" Int. J. Technol. Res. Eng. (2014)

[40]

Bhikshma "An experimental investigation on properties of geopolymer concrete (no cement concrete)" Asian J. Civ. Eng. Build. Hous. (2012)

[41]

Biswas, W.K., Cooling, D., 2013. Sustainability assessment of red sand as a substitute for virgin sand and crushed limestone. J. Ind. Ecol.. n/a-n/a. https://doi.org/10.1111/jiec.12030. 10.1111/jiec.12030

[42]

Board "Handbook on agro based industries" Niir Proj. Consult. Serv. (2012)

[43]

Boonserm, K., Sata, V., Pimraksa, K., Chindaprasirt, P., 2012. Improved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive. Cement Concr. Compos. 34, 819–824. https://doi.org/10.1016/j.cemconcomp.2012.04.001. 10.1016/j.cemconcomp.2012.04.001

[44]

Boyd (2002)

[45]

Brake, N.A., Allahdadi, H., Adam, F., 2016. Flexural strength and fracture size effects of pervious concrete. Constr. Build. Mater. 113, 536–543. https://doi.org/10.1016/j.conbuildmat.2016.03.045. 10.1016/j.conbuildmat.2016.03.045

[46]

Breña (2001)

[47]

Brough, A., Atkinson, A., 2000. Automated identification of the aggregate–paste interfacial transition zone in mortars of silica sand with Portland or alkali-activated slag cement paste. Cement Concr. Res. 30, 849–854. https://doi.org/10.1016/S0008-8846(00)00254-4. 10.1016/s0008-8846(00)00254-4

[48]

Calderón-Moreno, J.M., Schehl, M., Popa, M., 2002. Superplastic behavior of zirconia-reinforced alumina nanocomposites from powder alcoxide mixtures. Acta Mater.. 50, 3973–3983. https://doi.org/10.1016/S1359-6454(02)00163-5. 10.1016/s1359-6454(02)00163-5

[49]

Castel (2016)

[50]

Castel, A., Foster, S.J., 2015. Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement. Cement Concr. Res. 72, 48–53. https://doi.org/10.1016/j.cemconres.2015.02.016. 10.1016/j.cemconres.2015.02.016

Showing 50 of 272 references

Cited By

779

Engineering characteristics of agro-residue–based geopolymer concrete with fibre reinforcement

Govind Ravish, Mahapara Abbass · 2026

Scientific Reports

Durability and corrosion resistance of silica fume modified RCC under citric acid exposure through experimental analysis and multi objective optimization

Abhishek Mishra, Mukesh Pandey · 2026

Asian Journal of Civil Engineering

Effect of elevated temperature on strength and microstructure of metakaolin-based geopolymer composites having fireclay and silica sands

Mohamed Hechmi El Ouni, Ahmed A. Alawi Al-Naghi · 2026

Case Studies in Construction Materi...

Low-carbon pervious geopolymer concrete for urban infrastructure: Multi-scale performance contributions of municipal solid waste incineration bottom ash

Shuxiang Zhang, Zhi Zheng · 2026

Case Studies in Construction Materi...

Creep failure of alkali activated slag concrete in compression: Effect of loading age and stress level

Ziyang Zhang, Xianggang Bian · 2026

Case Studies in Construction Materi...

Effects of micro-silica and ceramic tile waste on the mechanical and durability properties of M40 grade concrete

Sourabh Dhiman, Seema Seema · 2025

AIP Advances

Influence of untreated and treated recycled coarse aggregates on engineering properties of slag dolomite geopolymer concrete

Najeeb Manhanpally, Praveen Nagarajan · 2025

Scientific Reports

Integrating advanced data imputation techniques and machine learning models to develop a predictive model for compressive strength of geopolymer concrete

Madushan Rathnayaka, Kushan Wijesundara · 2025

Archives of Civil and Mechanical En...

Prediction of Rheological Properties of PVA Fiber and Nano-SiO2-Reinforced Geopolymer Mortar Based on Back Propagation Neural Network Model Optimized by Genetic Algorithm

Guo Zhang, Peng Zhang · 2025

Polymers

Utilization of wet-grinding sand washing sludge as partial mineral precursor for alkali-activated slag materials

Shuo Dai, Binggen Zhan · 2025

Journal of Building Engineering

Impact of ground granular blast slag proportioning in fly ash geopolymer mortars with eco-processed pozzolana and palm oil clinker sand

Adel Kassem Farag Gaddafi · 2025

Discover Materials

Shrinkage Characteristics of Geopolymer Concrete: A Comprehensive Review

Rukayat Olayinka, Reza Jafari · 2025

Materials

Mechanical properties and durability of slag granite geopolymer cement incorporated zirconium aluminum layered double hydroxide

Fayza S. Hashem, Ahmed T. Abdel Salam · 2025

Scientific Reports

Transforming Waste into Sustainable Construction Materials: Resistant Geopolymers from Recycled Sources

Rosalia Maria Cigala, Georgia Papanikolaou · 2025

Recycling

The role of water during the middle or later periods of Class F fly ash-based geopolymerization

Xiaonan Ge, Yiming Zhang · 2025

Cement and Concrete Composites

Strength, durability, and economic analysis of GGBS-based geopolymer concrete with silica fume under harsh conditions

Sagar Paruthi, Ibadur Rahman · 2024

Scientific Reports

Ensemble machine learning models for predicting the CO2 footprint of GGBFS-based geopolymer concrete

Amin Al-Fakih, Ebrahim Al-wajih · 2024

Journal of Cleaner Production

Evaluation of geotechnical, mineralogical and environmental properties of clayey soil stabilized with different industrial by-products: A comparative study

J.L. Díaz-López, J. Rosales · 2024

Construction and Building Materials

A comprehensive review on the factors influencing engineering characteristics of lightweight geopolymer concrete

Siba Sankar Chanda, Shyamal Guchhait · 2024

Journal of Building Engineering

Review on the mechanical properties of rubberized geopolymer concrete

Sunday U. Azunna, Farah Nora Aznieta Binti Abd Aziz · 2024

Cleaner Materials

Metrics

779

Citations

272

References

Details

Published: Apr 01, 2020
Vol/Issue: 251
Pages: 119679
License: View

Authors

Funding

Prince Sattam bin Abdulaziz University

Cite This Article

Y.H. Mugahed Amran, Rayed Alyousef, Hisham Alabduljabbar, et al. (2020). Clean production and properties of geopolymer concrete; A review. Journal of Cleaner Production, 251, 119679. https://doi.org/10.1016/j.jclepro.2019.119679

Clean production and properties of geopolymer concrete; A review

You May Also Like