Topics

No keywords indexed for this article. Browse by subject →

References
37
[1]
Carbon Based Refractories

Emad Mohamed M. EWAIS

Journal of the Ceramic Society of Japan 2004 10.2109/jcersj.112.517
[2]
Mukherjee "A comprehensive review of recent advances in magnesia carbon refractories" Interceram Int. Ceram. Rev. (2014) 10.1007/bf03401039
[3]
Tsutsui "Magnesia-carbon refractories for converters" Nippon Steel Tech. Rep. (2020)
[4]
Kim "Effects of expanded graphite content on the performance of MgO-C refractories" Int. J. Appl. Ceram. Technol. (2023) 10.1111/ijac.14464
[5]
Bahtlia "Corrosion behaviours of MgO-C refractories: incorporation of graphite or pyrolytic carbon black as a carbon source" Ceram. Int. (2018) 10.1016/j.ceramint.2018.01.097
[6]
Xing "Enhanced mechanical performance of in–situ Mg–sialon in low–carbon MgO–C refractories through Si–Al4SiC4 additions" J. Eur. Ceram. Soc. (2024) 10.1016/j.jeurceramsoc.2024.02.021
[7]
Moline "Impact of the reduction of graphite content in critical properties of MgO–C bricks for steelmaking industry" Open Ceram. (2023)
[8]
Moline "The effects of binder type combined with graphite content and the presence of aluminum on the characteristics of MgO–C bricks" Ceram. Int. (2022) 10.1016/j.ceramint.2022.08.050
[9]
Yehorov "Oxidation Behavior of MgO-C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P" Steel Res. Int. (2025) 10.1002/srin.202400260
[10]
Stadtmüller "MgO−C refractories based on refractory recyclates and environmentally friendly binders" Open Ceram. (2023)
[11]
T. Yamamura, O. Nomura, H. Tada, A. Torigoe, Carbon-Containing Refractory and Process for Producing the Same, US 6136227 A, 2000.
[12]
Preparation and Properties of MgO-C Refractories Using Sucrose as Binder

Tengteng Shi, Ling Zhu, Zhaoyu Yin et al.

IOP Conference Series: Materials Science and Engin... 2019 10.1088/1757-899x/678/1/012092
[13]
Eco-friendly lactose/tannin-based binder in MgO–C refractories produced from MgO–C recyclate

Anna-Marie Lauermannová, Ondřej Jankovský, Till M.J. Stadtmüller et al.

Ceramics International 2024 10.1016/j.ceramint.2024.07.372
[14]
Shundo "Network formation and physical properties of epoxy resins for future practical applications" JACS Au (2022) 10.1021/jacsau.2c00120
[15]
Feng "Recent progress in degradation and recycling of epoxy resin" J. Mater. Res. Technol. (2024) 10.1016/j.jmrt.2024.08.095
[16]
Białkowska "Hybrid epoxy nanocomposites: improvement in mechanical properties and toughening mechanisms—A review" Polymers (2023) 10.3390/polym15061398
[17]
Pomázi "Flame retardancy of low-viscosity epoxy resins and their carbon fibre reinforced composites via a combined solid and gas phase mechanism" Polymers (2018) 10.3390/polym10101081
[18]
Rakotomalala "Recent developments in halogen free flame retardants for epoxy resins for electrical and electronic applications" Materials (2010) 10.3390/ma3084300
[19]
Morgan "An overview of flame retardancy of polymeric materials: application, technology, and future directions: application" Fire Mater. (2013) 10.1002/fam.2128
[20]
Liu "Advanced flame-retardant methods for polymeric materials" Adv. Mater. (2022)
[21]
Wang "Effect of aluminum diethylphosphinate and its synergist on flame-retardant effects of epoxy resin" J. Therm. Anal. Calorim. (2022) 10.1007/s10973-021-11045-1
[22]
Zhong "Synergistic effects and flame-retardant mechanism of aluminum diethyl phosphinate in combination with melamine polyphosphate and aluminum oxide in epoxy resin" J. Therm. Anal. Calorim. (2018) 10.1007/s10973-018-7699-4
[23]
J. Lustoň, F. Vašš, Anionic copolymerization of cyclic ethers with cyclic anhydrides, in: Anionic Polymerization. Advances in Polymer Science, vol 56, Springer, Berlin, Heidelberg, 1984, pp. 91–133. doi: 10.1007/BFb0024121. 10.1007/bfb0024121
[24]
Lu "Cure kinetics and properties of high performance cycloaliphatic epoxy resins cured with anhydride" Ind. Eng. Chem. Res. (2019) 10.1021/acs.iecr.8b06442
[25]
Zhang "Curing mechanism of phenolic resin binder for oxide-carbon refractories" ISIJ Int. (2016) 10.2355/isijinternational.isijint-2015-260
[26]
Cañavate "Study of the curing process of an epoxy resin by FTIR spectroscopy" Polym. Plast. Technol. Eng. (2000) 10.1081/ppt-100101414
[27]
Sanchezsoto "Curing FTIR study and mechanical characterization of glass bead filled trifunctional epoxy composites" Compos. Sci. Technol. (2007) 10.1016/j.compscitech.2006.10.006
[28]
Gilmer "Reactive epoxy nanofiltration membranes with disulfide bonds for the separation of multicomponent chemical mixtures" ACS Omega (2018) 10.1021/acsomega.8b00931
[29]
Wall "Effect of structure on the thermal decomposition of polymers" J. Res. Natl. Bur. Stand. (1958) 10.6028/jres.060.046
[30]
Heitmann "Chemical causes of the typical burnt smell after accidental fires" Anal. Bioanal. Chem. (2009) 10.1007/s00216-009-3071-7
[31]
Heitmann "Chemical composition of burnt smell caused by accidental fires: environmental contaminants" Chemosphere (2011) 10.1016/j.chemosphere.2010.09.065
[32]
Wichmann "Emission and burnt smell characteristics from combustion experiments with defined materials" Chemosphere (2012) 10.1016/j.chemosphere.2012.03.051
[33]
Zhu "Effect of nanocarbon sources on microstructure and mechanical properties of MgO−C refractories" Ceram. Int. (2014) 10.1016/j.ceramint.2013.08.101
[34]
Wang "Investigating the effect of aluminum diethylphosphinate on thermal stability, flame retardancy, and mechanical properties of poly(butylene succinate)" Front. Mater. (2021) 10.3389/fmats.2021.737749
[35]
Alizadeh "Influence of phosphate binders on the physical and mechanical properties of magnesia carbon monolithics composed of recycled refractory aggregates" Ironmak. Steelmak. (2016) 10.1179/1743281215y.0000000035
[36]
Mei "Mechanical, structural and oxidation resistance enhancement of carbon foam by in situ grown SiC nanowires" Ceram. Int. (2016) 10.1016/j.ceramint.2015.11.141
[37]
Sonnier "Flame retardancy of phosphorus-containing ionic liquid based epoxy networks" Polym. Degrad. Stab. (2016) 10.1016/j.polymdegradstab.2016.10.009
Metrics
0
Citations
37
References
Details
Published
May 01, 2026
Vol/Issue
157
Pages
104-114
License
View
Funding
Korea Institute of Energy Technology Evaluation and Planning Award: RS-2021-KP002514
Korea Institute for Advancement of Technology
Ministry of Trade, Industry and Energy Award: RS-2021-KI002495
Cite This Article
Min-gyu Kim, Haeun Seo, Jeong Geun Park, et al. (2026). Epoxide/flame-retardant hybrid binder for reducing odor during thermal decomposition of MgO-C refractories. Journal of Industrial and Engineering Chemistry, 157, 104-114. https://doi.org/10.1016/j.jiec.2025.09.042
Related

You May Also Like

Synthesis and application of epoxy resins: A review

Fan-Long Jin, Xiang Li · 2015

1,933 citations

Facile and safe graphene preparation on solution based platform

Fatima Tuz Johra, Jee-Wook Lee · 2014

1,218 citations

TiO2 photocatalyst for water treatment applications

Seul-Yi Lee, Soo-Jin Park · 2013

918 citations