Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review

Bo Mao; Arpith Siddaiah; Yiliang Liao; Pradeep L. Menezes

doi:10.1016/j.jmapro.2020.02.009

journal article May 01, 2020

Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review

Bo Mao

Arpith Siddaiah

Yiliang Liao

Pradeep L. Menezes

Journal of Manufacturing Processes Vol. 53 pp. 153-173 · Elsevier BV

View at Publisher Save 10.1016/j.jmapro.2020.02.009

Topics

No keywords indexed for this article. Browse by subject →

References

174

[1]

Priest "Automobile engine tribology—approaching the surface" Wear (2000) 10.1016/s0043-1648(00)00375-6

[2]

Holmberg "Coatings tribology: a concept, critical aspects and future directions" Thin Solid Films (1994) 10.1016/0040-6090(94)90315-8

[3]

Zhang "Improving dry machining performance of TiAlN hard-coated tools through combined technology of femtosecond laser-textures and WS2 soft-coatings" J Manuf Processes (2017) 10.1016/j.jmapro.2017.10.018

[4]

Vilhena "Surface texturing by pulsed Nd: YAG laser" Tribol Int (2009) 10.1016/j.triboint.2009.06.003

[5]

Menezes "Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate" Wear (2006) 10.1016/j.wear.2006.01.001

[6]

A critical assessment of surface texturing for friction and wear improvement

C. Gachot, A. Rosenkranz, S.M. Hsu et al.

Wear 2017 10.1016/j.wear.2016.11.020

[7]

He "Design and application of a flexure-based oscillation mechanism for surface texturing" J Manuf Processes (2018) 10.1016/j.jmapro.2018.02.017

[8]

Martz "Preliminary report of developments in interrupted surface finishes" Proc Inst Mech Eng (1949) 10.1243/pime_proc_1949_161_007_02

[9]

Anno "Microasperity lubrication" J Lubr Technol (1968) 10.1115/1.3601568

[10]

Etsion "A model for mechanical seals with regular microsurface structure" Tribol Trans (1996) 10.1080/10402009608983582

[11]

Etsion "Analytical and experimental investigation of laser-textured mechanical seal faces" Tribol Trans (1999) 10.1080/10402009908982248

[12]

Etsion "Improving tribological performance of mechanical components by laser surface texturing" Tribol Lett (2004) 10.1007/s11249-004-8081-1

[13]

Rosenkranz "Surface texturing in machine elements− a critical discussion for rolling and sliding contacts" Adv Eng Mater (2019) 10.1002/adem.201900194

[14]

Grützmacher "Multi-scale surface texturing in tribology—current knowledge and future perspectives" Lubricants (2019) 10.3390/lubricants7110095

[15]

Ryk "Testing piston rings with partial laser surface texturing for friction reduction" Wear (2006) 10.1016/j.wear.2006.01.031

[16]

Marchetto "AFM investigation of tribological properties of nano-patterned silicon surface" Wear (2008) 10.1016/j.wear.2007.12.010

[17]

Pettersson "Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding" Tribol Lett (2004) 10.1023/b:tril.0000044504.76164.4e

[18]

Li "Tuning apparent friction coefficient by controlled patterning bulk metallic glasses surfaces" Sci Rep (2016) 10.1038/srep39388

[19]

Chen "Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS2 coatings prepared on aluminum-silicon alloys" Tribol Int (2018) 10.1016/j.triboint.2018.02.039

[20]

Walker "Tribological behaviour of an electrochemical jet machined textured Al-Si automotive cylinder liner material" Wear (2017) 10.1016/j.wear.2017.01.085

[21]

Greco "Surface texturing of tribological interfaces using the vibromechanical texturing method" J Manuf Sci Eng (2009) 10.1115/1.4000418

[22]

Singh "Laser surface engineering of magnesium alloys: a review" JOM (2012) 10.1007/s11837-012-0340-2

[23]

Kennedy "A review of the use of high power diode lasers in surface hardening" J Mater Process Technol (2004) 10.1016/j.jmatprotec.2004.04.276

[24]

Kurella "Surface modification for bioimplants: the role of laser surface engineering" J Biomater Appl (2005) 10.1177/0885328205052974

[25]

Earl "The dynamics of laser surface modification" J Manuf Processes (2016) 10.1016/j.jmapro.2015.10.002

[26]

Etsion "Improving tribological performance of mechanical seals by laser surface texturing" Proceedings of The International Pump Users Symposium (2000)

[27]

Brizmer "A laser surface textured parallel thrust bearing" Tribol Trans (2003) 10.1080/10402000308982643

[28]

Ryk "Experimental investigation of partial laser surface texturing for piston-ring friction reduction" Tribol Trans (2005) 10.1080/05698190500313544

[29]

Baumgart "A new laser texturing technique for high performance magnetic disk drives" IEEE Trans Magn (1995) 10.1109/20.490199

[30]

Xu "Fabrication and tribological characterization of laser textured boron cast iron surfaces" Surf Coat Technol (2017) 10.1016/j.surfcoat.2017.02.005

[31]

Tripathi "Improved tribological behavior of grey cast Iron Under low and high viscous lubricants by laser surface texturing" Mater Perform Charact (2017) 10.1520/mpc20160020

[32]

Meng "Improving tribological performance of cemented carbides by combining laser surface texturing and WSC solid lubricant coating" Int J Refract Met Hard Mater (2018) 10.1016/j.ijrmhm.2017.12.024

[33]

Xing "Angle-dependent tribological properties of AlCrN coatings with microtextures induced by nanosecond laser under dry friction" Appl Phys A (2018) 10.1007/s00339-018-1710-6

[34]

Maruo "Recent progress in multiphoton microfabrication" Laser Photonics Rev (2008) 10.1002/lpor.200710039

[35]

Mitov "Convection-induced patterns in phase-separating polymeric fluids" Phys Rev Lett (1998) 10.1103/physrevlett.81.3427

[36]

Bonse "Laser-induced periodic surface structures—a scientific evergreen" IEEE J Sel Top Quantum Electron (2017) 10.1109/jstqe.2016.2614183

[37]

Van Driel "Laser-induced periodic surface structure on solids: a universal phenomenon" Phys Rev Lett (1982) 10.1103/physrevlett.49.1955

[38]

Kusinski "Laser modification of the materials surface layer–a review paper" Bull Polish Acad Sci Tech Sci (2012)

[39]

Etsion "State of the art in laser surface texturing" J Tribol (2005) 10.1115/1.1828070

[40]

Bonse "Femtosecond laser texturing of surfaces for tribological applications" Materials (2018) 10.3390/ma11050801

[41]

Chichkov "Femtosecond, picosecond and nanosecond laser ablation of solids" Appl Phys A (1996) 10.1007/bf01567637

[42]

Momma "Short-pulse laser ablation of solid targets" Opt Commun (1996) 10.1016/0030-4018(96)00250-7

[43]

Pocorni "Numerical simulation of laser ablation driven melt waves" J Manuf Processes (2017) 10.1016/j.jmapro.2017.09.032

[44]

Wang "Direct fabrication of cone array microstructure on monocrystalline silicon surface by femtosecond laser texturing" Opt Mater (Amst) (2017) 10.1016/j.optmat.2017.06.046

[45]

Hu "Friction and wear behavior analysis of the stainless steel surface fabricated by laser texturing underwater" Tribol Int (2016) 10.1016/j.triboint.2016.06.001

[46]

Fang "Surface composition-lubrication design of Al2O3/Mo laminated composites—part I: influence of laser surface texturing on the tribological behavior at 25 and 800 C" Wear (2015) 10.1016/j.wear.2015.04.010

[47]

Li "Micro surface texturing of alumina ceramic with nanosecond laser" Procedia Eng (2017) 10.1016/j.proeng.2017.01.155

[48]

Liu "Fabrication of micro-scale textured grooves on green ZrO2 ceramics by pulsed laser ablation" Ceram Int (2017) 10.1016/j.ceramint.2017.02.074

[49]

Mücklich "Laser interference metallurgy—periodic surface patterning and formation of intermetallics" Intermetallics (2005) 10.1016/j.intermet.2004.07.005

[50]

Zabila "Direct laser interference patterning: theory and application" Acta Phys Pol Ser A Gen Phys (2009) 10.12693/aphyspola.115.591

Showing 50 of 174 references

Cited By

433

Laser precision machining methodology for mechanical seal hydrodynamic grooves based on target-modified parameter inversion

Zhong Lu, Shuo Chen · 2026

Journal of Manufacturing Processes

Effect of fiber orientation on the tribological performance of 3D-printed carbon fiber-reinforced polyetheretherketone with laser surface texturing

Zhongcheng Cui, Aziguli Keremu · 2026

Tribology International

Recent advances in laser surface texturing for improving tribological properties of materials (2020–2025)

Xuekun Sun, Jingliang Jiang · 2025

The International Journal of Advanc...

Effect of picosecond laser surface texturing under Babbitt coating mask on friction and wear properties of GCr15 bearing steel surface

Wenhua Wang, Wei Yuan · 2024

Engineering Failure Analysis

Simulation and Experimental Study on Tribological Properties of Herringbone Texture on 42CrMo Bearing Alloy Steel Surface

Yukun Mao, Weihai Chen · 2024

Journal of Materials Engineering an...

Tribological properties of MAO coating deposited on aluminum base bearing alloy with different texture shapes

Xiaodong Yang, Weihai Chen · 2024

Surface and Coatings Technology

Beyond smoothness: the art of surface texturing battling against friction

Qianhao Xiao, Xuanyao Wang · 2024

International Journal of Extreme Ma...

High temperature wear performance of in-situ forming textured Ni60/WC/h-BN composite coatings based on laser micro-cladding

Yichen Bao, Jianxin Deng · 2024

Journal of Materials Research and T...

Increasing the friction and wear performance of AISI 316L under dry, aqueous and oil lubricated sliding conditions with surface textures fabricated by laser-powder bed fusion (L-PBF)

M. Türkdayı, Y. Seçer Kavasoğlu · 2024

Tribology International

Study on hydrodynamic lubrication and friction reduction performance of spur gear with groove texture

Xuefeng Chang, Duoji Renqing · 2023

Tribology International

Insight into the Mechanisms of Nitride Films with Excellent Hardness and Lubricating Performance: A Review

Xinmeng Wu, Yaohong Jiang · 2023

Nanomaterials

Influence of Pulsed Laser Mode on Ablation and Modification Processes of SI3N4–TiC Ceramics Surface Layer

V. V. Kuzin · 2023

Refractories and Industrial Ceramic...

Metrics

433

Citations

174

References

Details

Published: May 01, 2020
Vol/Issue: 53
Pages: 153-173
License: View

Authors

Department of Mechanical Engineering, University of Nevada, Reno, Reno, NV 89557, USA

Department of Mechanical Engineering, University of Nevada-Reno, Reno, NV 89557, USA

Funding

Department of Mechanical Engineering at the University of Nevada

ORAU Ralph E. Powe Junior Faculty Enhancement Award, 2016

Cite This Article

Bo Mao, Arpith Siddaiah, Yiliang Liao, et al. (2020). Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review. Journal of Manufacturing Processes, 53, 153-173. https://doi.org/10.1016/j.jmapro.2020.02.009

Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review

You May Also Like