Design strategy for high-entropy alloys with enhanced microstructural stability and mechanical properties for high-temperature applications

Heoun-Jun Kwon; Ka Ram Lim; Young Kyun Kim; Young Sang Na; Seonghoon Yi

doi:10.1016/j.msea.2023.145836

journal article Open Access Jan 01, 2024

Design strategy for high-entropy alloys with enhanced microstructural stability and mechanical properties for high-temperature applications

Heoun-Jun Kwon Ka Ram Lim Young Kyun Kim Young Sang Na Seonghoon Yi

Materials Science and Engineering: A Vol. 889 pp. 145836 · Elsevier BV

View at Publisher Save 10.1016/j.msea.2023.145836

Topics

No keywords indexed for this article. Browse by subject →

References

41

[1]

Yeh "Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes" Adv. Eng. Mater. (2004) 10.1002/adem.200300567

[2]

Zhang "Microstructures and properties of high-entropy alloys" Prog. Mater. Sci. (2014) 10.1016/j.pmatsci.2013.10.001

[3]

Tsai "High-entropy alloys: a critical review" Mater. Res. Lett. (2014) 10.1080/21663831.2014.912690

[4]

Miracle "A critical review of high entropy alloys and related concepts" Acta Mater. (2017) 10.1016/j.actamat.2016.08.081

[5]

Gao "Microstructural origins of high strength and high ductility in an AlCoCrFeNi2. 1 eutectic high-entropy alloy" Acta Mater. (2017) 10.1016/j.actamat.2017.07.041

[6]

George "High-entropy alloys" Nat. Rev. Mater. (2019) 10.1038/s41578-019-0121-4

[7]

Cantor "Microstructural development in equiatomic multicomponent alloys" Mater. Sci. Eng. A (2004) 10.1016/j.msea.2003.10.257

[8]

Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy

O.N. Senkov, J.M. Scott, S.V. Senkova et al.

Journal of Alloys and Compounds 2011 10.1016/j.jallcom.2011.02.171

[9]

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz, Anton Hohenwarter, Dhiraj Catoor et al.

Science 2014 10.1126/science.1254581

[10]

Senkov "Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys" Intermetallics (2011) 10.1016/j.intermet.2011.01.004

[11]

Senkov "Refractory high-entropy alloys" Intermetallics (2010) 10.1016/j.intermet.2010.05.014

[12]

Wang "Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication" J. Alloys Compd. (2017) 10.1016/j.jallcom.2016.10.138

[13]

Doan "Microstructure and composition dependence of mechanical characteristics of nanoimprinted AlCoCrFeNi high-entropy alloys" Sci. Rep. (2021) 10.1038/s41598-021-93272-y

[14]

Hu "Microstructure and oxidation behavior of the Y/Ta/Hf co-doped AlCoCrFeNi high-entropy alloys in air at 1100°C" Corrosion Sci. (2023) 10.1016/j.corsci.2022.110930

[15]

Chou "Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys" Mater. Sci. Eng. B (2009) 10.1016/j.mseb.2009.05.024

[16]

Manzoni "On the path to optimizing the Al-Co-Cr-Cu-Fe-Ni-Ti high entropy alloy family for high temperature applications" Entropy (2016) 10.3390/e18040104

[17]

Shiratori "Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting" Mater. Sci. Eng. A (2016) 10.1016/j.msea.2016.01.019

[18]

Tang "Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization" Mater. Sci. Eng. A (2015) 10.1016/j.msea.2015.08.078

[19]

Lim "Dual-phase high-entropy alloys for high-temperature structural applications" J. Alloys Compd. (2017) 10.1016/j.jallcom.2017.09.089

[20]

Yashiro "Molecular dynamics simulation of dislocation nucleation and motion at γ/γ′ interface in Ni-based superalloy" Int. J. Mech. Sci. (2002) 10.1016/s0020-7403(02)00138-8

[21]

Roy "Mechanism of yield strength anomaly of Alloy 617" Mater. Sci. Eng. A (2009) 10.1016/j.msea.2009.03.090

[22]

Unocic "Dislocation decorrelation and relationship to deformation microtwins during creep of a γ′ precipitate strengthened Ni-based superalloy" Acta Mater. (2011) 10.1016/j.actamat.2011.07.069

[23]

Lian "Temperature dependence of tensile behavior of Ni-based superalloy M951" Mater. Sci. Eng. A (2008) 10.1016/j.msea.2008.02.013

[24]

Qiao "Effect of aluminum on the friction and wear behavior of Al x CrFeNi medium‐entropy alloys" Adv. Eng. Mater. (2022) 10.1002/adem.202101475

[25]

Jiang "Influence of synthesis method on microstructure and mechanical behavior of Co-free AlCrFeNi medium-entropy alloy" Intermetallics (2019) 10.1016/j.intermet.2019.02.006

[26]

Wen "Computation of stability, elasticity and thermodynamics in equiatomic AlCrFeNi medium-entropy alloys" J. Mater. Sci. (2019) 10.1007/s10853-018-2943-7

[27]

Chen "Effects of aluminum on microstructure and compressive properties of Al-Cr-Fe-Ni eutectic multi-component alloys" Mater. Sci. Eng. A (2017) 10.1016/j.msea.2016.11.019

[28]

Guo "Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys" J. Appl. Phys. (2011) 10.1063/1.3587228

[29]

Matsui "Effects of Cr content on mechanical properties of Fe-Cr alloy" J. Jpn. Soc. Powder Powder Metall. (1999) 10.2497/jjspm.46.1179

[30]

Chen "Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature" Acta Mater. (2020) 10.1016/j.actamat.2020.02.049

[31]

Toda-Caraballo "Modelling solid solution hardening in high entropy alloys" Acta Mater. (2015) 10.1016/j.actamat.2014.11.014

[32]

Wang "Prediction of the yield strength of a secondary-hardening steel" Acta Mater. (2013) 10.1016/j.actamat.2013.04.052

[33]

Leslie "Iron and its dilute substitutional solid solutions" Metall. Mater. Trans. B (1972) 10.1007/bf02680580

[34]

Choi "Probability-dependent precipitation strengthening effect of anisotropic precipitate in Al-Mg-Si alloy produced by T6 heat treatment" Korean J. Met. Mater.) (2021) 10.3365/kjmm.2021.59.8.515

[35]

Hao "Formation of cuboidal B2 nanoprecipitates and microstructural evolution in the body-centered-cubic Al0.7NiCoFe1.5Cr1.5 high-entropy alloy" J. Alloys Compd. (2019) 10.1016/j.jallcom.2018.11.381

[36]

Strutt "Creep behavior of the Heusler type structure alloy Ni2AlTi" Metall. Mater. Trans. A (1976) 10.1007/bf02644035

[37]

Baker (2013)

[38]

Li "Heat resistance of ferritic stainless steels with 15% chromium for automobile exhaust system" Adv. Mat. Res., Trans Tech Publ. (2011)

[39]

Samuel "Tensile deformation and work hardening behaviour of AISI 431 martensitic stainless steel at elevated temperatures" High Temp. Mater. Process. (2019) 10.1515/htmp-2019-0028

[40]

(2023)

[41]

Huang "High-temperature materials for structural applications: new perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials" MRS Bull. (2019) 10.1557/mrs.2019.257

Metrics

15

Citations

41

References

Details

Published: Jan 01, 2024
Vol/Issue: 889
Pages: 145836
License: View

Authors

Funding

Korea Institute of Materials Science

Cite This Article

Heoun-Jun Kwon, Ka Ram Lim, Young Kyun Kim, et al. (2024). Design strategy for high-entropy alloys with enhanced microstructural stability and mechanical properties for high-temperature applications. Materials Science and Engineering: A, 889, 145836. https://doi.org/10.1016/j.msea.2023.145836

Design strategy for high-entropy alloys with enhanced microstructural stability and mechanical properties for high-temperature applications

You May Also Like