journal article
Apr 01, 2026
Microstructural evolution and mechanical properties of friction stir spot welded pure Ta
Topics
No keywords indexed for this article. Browse by subject →
References
62
[1]
Hosseini "Dislocation structure and strength evolution of heavily deformed tantalum" Int. J. Refract. Metals Hard Mater. (2009) 10.1016/j.ijrmhm.2008.09.006
[2]
Al-Masha’al "Evaluation of residual stress in sputtered tantalum thin-film" Appl. Surf. Sci. (2016) 10.1016/j.apsusc.2016.02.236
[3]
Zhou "Microstructure tailoring to enhance strength and ductility in pure tantalum processed by selective laser melting" Mater. Sci. Eng., A (2020) 10.1016/j.msea.2020.139352
[4]
Zhou "Selective laser melting of pure tantalum: densification, microstructure and mechanical behaviors" Materials Science Mater. Sci. Eng. A (2017) 10.1016/j.msea.2017.09.083
[5]
Browning "Room and ultrahigh temperature mechanical properties of field assisted sintered tantalum alloys" Mater. Sci. Eng., A (2017) 10.1016/j.msea.2016.09.067
[6]
Yang "Powder bed fusion pure tantalum and tantalum alloys: from original materials, process, performance to applications" Opt. Laser Technol. (2024) 10.1016/j.optlastec.2024.111057
[7]
Ipatova "Radiation-induced void formation and ordering in Ta-W alloys" J. Nucl. Mater. (2017) 10.1016/j.jnucmat.2017.08.029
[8]
Dong "Microstructural evolution and sintering kinetics during spark plasma sintering of pure tantalum powder" J. Alloys Compd. (2019) 10.1016/j.jallcom.2018.12.049
[9]
Shen "Enhanced mechanical properties of tantalum alloys via multi-principal elements and compositionally complex carbides" J. Iron Steel Res. Int. (2025) 10.1007/s42243-025-01590-6
[10]
Peng "Effect of Ta content on high temperature oxidation and hot corrosion resistance of DZ411 superalloy" J. Iron Steel Res. Int. (2024) 10.1007/s42243-024-01201-w
[11]
Luo "Ultrahigh temperature tensile properties of arc-melted tungsten and tungsten-iridium alloys" Scripta Metall. Mater. (1991) 10.1016/0956-716x(91)90039-4
[12]
Liu "Microstructure and deformation mechanism of Ni-based wrought superalloys for A-USC power plants: a review" J. Mater. Sci. (2024) 10.1007/s10853-024-09517-4
[13]
Li "Precipitation behavior of γ′ precipitates in 21Cr-32Fe-41Ni heat-resistant alloy at different aging temperatures" J. Alloys Compd. (2023) 10.1016/j.jallcom.2023.170405
[14]
Zhang "Understanding the growth of discontinuous precipitates in a Ni-45%Cr alloy driven by twins and stacking faults" Mater. Lett. (2024) 10.1016/j.matlet.2024.136897
[15]
Yang "Effects of solution cooling rate on the grain boundary and mechanical properties of GH4710 alloy" Mater. Sci. Eng., A (2022) 10.1016/j.msea.2021.142459
[16]
Wang "Microstructure and mechanical properties of electron beam welded Ta2.5W and GH3128 joints" Int. J. Refract. Metals Hard Mater. (2025) 10.1016/j.ijrmhm.2025.107325
[17]
Bexiga "Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys" Cienc. Tecnol. Dos Mater. (2017)
[18]
Yang "Advances in welding of tantalum alloy" J. Mater. Res. Technol. (2025) 10.1016/j.jmrt.2025.08.277
[19]
Chen "The interfacial microstructure and fracture toughness of W/Ta multilayer composites" Mater. Sci. Eng., A (2022) 10.1016/j.msea.2021.142272
[20]
Kim "Microstructure evolution and cyclic thermal behavior of Ta‒10W cladded onto the inner surface of steel tube by explosive welding" Mater. Sci. Eng., A (2025) 10.1016/j.msea.2024.147716
[21]
Grassel "Friction stir lap weld-brazing of AA7050 aluminium alloy to Ti6Al4V titanium alloy – limitations in dissimilar metal joining" Manuf. Lett. (2025)
[22]
Friction stir welding and processing
R.S. Mishra, Z.Y. Ma
Materials Science and Engineering: R: Reports
2005
10.1016/j.mser.2005.07.001
[23]
Cong "A new economy-durability tool design to improve joint quality of titanium alloy friction stir welds" J. Mater. Res. Technol. (2025) 10.1016/j.jmrt.2025.06.104
[24]
Tier "The influence of refill FSSW parameters on the microstructure and shear strength of 5042 aluminium welds" J. Mater. Process. Technol. (2013) 10.1016/j.jmatprotec.2012.12.009
[25]
Bozzi "Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds" J. Mater. Process. Technol. (2010) 10.1016/j.jmatprotec.2010.03.022
[26]
Liu "Refill friction stir spot welding of AZ31 magnesium alloy sheets: metallurgical features, microstructure, texture and mechanical properties" J. Mater. Res. Technol. (2023) 10.1016/j.jmrt.2023.01.151
[27]
Ibrahim "Application of a novel friction stir spot welding process on dissimilar aluminum joints" J. Manuf. Process. (2018) 10.1016/j.jmapro.2018.08.018
[28]
Fereiduni "Aluminum/steel joints made by an alternative friction stir spot welding process" J. Mater. Process. Technol. (2015) 10.1016/j.jmatprotec.2015.04.028
[29]
Jeon "Material properties of friction stir spot welded joints of dissimilar aluminum alloys" Trans. Nonferrous Met. Soc. China (2012) 10.1016/s1003-6326(12)61772-5
[30]
Hossain "Mechanical behaviors of friction stir spot welded joints of dissimilar ferrous alloys under opening-dominant combined loads" Adv. Mater. Sci. Eng. (2014) 10.1155/2014/572970
[31]
Basak "Gas pocket-assisted underwater friction stir spot welding" J. Mater. Process. Technol. (2023) 10.1016/j.jmatprotec.2023.118100
[32]
Hossain "Failure behaviours of friction stir spot welded joints of dissimilar ferrous alloys under quasi-static shear loads" Int. J. Mater. Prod. Technol (2014) 10.1504/ijmpt.2014.059036
[33]
Hossain "Friction stir spot welded joints of 409L stainless steels fabricated by a convex shoulder tool" Met. Mater. Int. (2013) 10.1007/s12540-013-6017-8
[34]
Wang "Interface development and microstructure evolution during double-sided friction stir spot welding of magnesium alloy by adjustable probes and their effects on mechanical properties of the joint" J. Mater. Process. Technol. (2021) 10.1016/j.jmatprotec.2021.117104
[35]
Wang "Flat friction stir spot welding of low carbon steel by double side adjustable tools" J. Mater. Sci. Technol. (2021) 10.1016/j.jmst.2020.06.015
[36]
Wang "Interface structure and mechanical properties of Fe/Al dissimilar lap joints formed by friction stir welding using an adjustable tool" Sci. Technol. Weld. Join. (2023) 10.1080/13621718.2023.2210980
[37]
Wang "Double-sided friction stir spot welding of ultra-high strength C-Mn-Si martensitic steel by adjustable probes" J. Mater. Process. Technol. (2022) 10.1016/j.jmatprotec.2021.117422
[38]
Wang "Microstructure characteristics and joining mechanisms of double-sided FSSWed ultra-high strength lightweight steel and mild steel" Mater. Today Commun. (2025)
[39]
Bilici "Effects of welding parameters on friction stir spot welding of high density polyethylene sheets" Mater. Des. (2012) 10.1016/j.matdes.2011.04.062
[40]
Ni "Effects of plunge depth on the intermetallic compounds and mechanical properties of Al/Cu joints fabricated by micro friction stir welding" Mater. Today Commun. (2024)
[41]
Cheong "Understanding a microstructure using GOS (Grain orientation spread) and its application to recrystallization study of hot deformed al-cu-mg alloys" Mater. Sci. Forum (2007)
[42]
Hadadzadeh "A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction" Mater. Sci. Eng., A (2018) 10.1016/j.msea.2017.10.062
[43]
Pouraliakbar "Texture and grain refinement for enhanced strength and ductility in friction stir welding of cold-rolled thin-strip rapidly solidified AA5182 Al–Mg alloy" J. Mater. Res. Technol. (2025) 10.1016/j.jmrt.2025.05.206
[44]
Yu "Analysis and characterization of dynamic recrystallization and grain structure evolution in friction stir welding of aluminum plates" Acta Mater. (2021) 10.1016/j.actamat.2021.116692
[45]
Shen "Effect of subgrain and the associated DRX behaviour on the texture modification of Mg-6.63Zn-0.56Zr alloy during hot tensile deformation" Mater. Sci. Eng., A (2021) 10.1016/j.msea.2021.141745
[46]
Sunnapu "Tool shoulder and pin geometry's effect on friction stir welding: a study of literature" (2020)
[47]
Kalinenko "Grain structure evolution in 6013 aluminum alloy during high heat-input friction-stir welding" Materials (2023) 10.3390/ma16175973
[48]
Zhou "Improvement of microstructure and texture homogeneity of tantalum by dynamic plastic deformation and subsequent annealing: effect of pass number" Mater. Sci. Eng., A (2022) 10.1016/j.msea.2022.143305
[49]
Das "Effect of phase interfaces to dimple pattern" Mater. Lett. (2023) 10.1016/j.matlet.2023.133954
[50]
Wojtiuk "Theoretical and experimental mechanical properties and thermal conductivity of W-Al-B thin films deposited by magnetron sputtering" J. Alloys Compd. (2025) 10.1016/j.jallcom.2025.185222
Showing 50 of 62 references
Metrics
0
Citations
62
References
Details
- Published
- Apr 01, 2026
- Vol/Issue
- 958
- Pages
- 150008
- License
- View
Authors
Funding
National Research Foundation of Korea
Ministry of Science and ICT, South Korea
Award: RS-2025-02218040
Ministry of Trade, Industry and Energy
Ulsan Metropolitan City
Cite This Article
Hyojoo Lee, Min-Ho Kim, Van Cong Phan, et al. (2026). Microstructural evolution and mechanical properties of friction stir spot welded pure Ta. Materials Science and Engineering: A, 958, 150008. https://doi.org/10.1016/j.msea.2026.150008
Related
You May Also Like
Microstructural development in equiatomic multicomponent alloys
B. Cantor, I.T.H. Chang · 2004
9,088 citations
Recent development in aluminium alloys for the automotive industry
W.S Miller, L Zhuang · 2000
2,207 citations
Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture
H.K. Birnbaum, P. Sofronis · 1994
1,987 citations