Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadening

I. Feijoo; M. Cabeza; P. Merino; G. Peña; M.C. Pérez; S. Cruz; P. Rey

doi:10.1016/j.powtec.2018.11.010

journal article Feb 01, 2019

Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadening

I. Feijoo M. Cabeza P. Merino

G. Peña M.C. Pérez S. Cruz P. Rey

Powder Technology Vol. 343 pp. 19-28 · Elsevier BV

View at Publisher Save 10.1016/j.powtec.2018.11.010

Topics

No keywords indexed for this article. Browse by subject →

References

28

[1]

Parvin "Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying" Mater. Sci. Eng. A (2008) 10.1016/j.msea.2008.05.004

[2]

Canakci "Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing" Powder Technol. (2014) 10.1016/j.powtec.2014.08.016

[3]

Erdemir "Microstructural characterization and mechanical properties of functionally graded Al2024/SiC composites prepared by powder metallurgy techniques" Trans. Nonferrous Met. Soc. China (English Edition) (2015) 10.1016/s1003-6326(15)63996-6

[4]

Varol "Modeling of the prediction of densification behavior of powder metallurgy Al–Cu–Mg/B4C composites using artificial neural networks" Acta Metall. Sin. (Engl. Lett.) (2015) 10.1007/s40195-014-0184-6

[5]

Chen "Effect of Y2O3 and TiC reinforcement particles on intermetallic formation and hardness of Al 6061 composites via mechanical alloying and sintering" Metall. Mater. Trans. A (2015) 10.1007/s11661-015-2957-6

[6]

Fogagnolo "Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders" Mater. Sci. Eng. A (2003) 10.1016/s0921-5093(02)00246-0

[7]

Cabeza "Effect of high energy ball milling on the morphology, microstructure and properties of nano-sized TiC particle-reinforced 6005A aluminium alloy matrix composite" Powder Technol. (2017) 10.1016/j.powtec.2017.07.089

[8]

Rajeev Kumar Gupta (2017)

[9]

Varol "Synthesis and characterization of nanocrystalline Al 2024–B4C composite powders by mechanical alloying" Philos. Mag. Lett. (2013) 10.1080/09500839.2013.779758

[10]

Canakci "Synthesis of novel CuSn10-graphite nanocomposite powders by mechanical alloying" Micro & Nano Letters (2014) 10.1049/mnl.2013.0715

[11]

Varol "Sukru Ozsahin, Prediction of the influence of processing parameters on synthesis of Al2024-B4C composite powders in a planetary mill using an artificial neural network" Sci. Eng. Compos. Mater. (2014) 10.1515/secm-2013-0148

[12]

Sivasankaran "X-ray peak broadening analysis of AA 6061100−x−x wt.% Al2O3 nanocomposite prepared by mechanical alloying" Mater. Charact. (2011) 10.1016/j.matchar.2011.04.017

[13]

Uvarov "Metrological characterization of X-ray diffraction methods at different acquisition geometries for determination of crystallite size in nano-scale materials" Mater. Charact. (2013) 10.1016/j.matchar.2013.09.002

[14]

X-ray line broadening from filed aluminium and wolfram

G.K Williamson, W.H Hall

Acta Metallurgica 1953 10.1016/0001-6160(53)90006-6

[15]

Warren "The separation of cold-work distortion and particle size broadening in X-ray patterns" J. Appl. Phys. (1952) 10.1063/1.1702234

[16]

Yu Rosenberg "Strain energy density in the x-ray powder diffraction from mixed crystals and Alloys" J. Phys. Condens. Matter (2000) 10.1088/0953-8984/12/37/307

[17]

Daly "The studies of crystallite size and microstrains in aluminium powder prepared by mechanical milling" Phys. Status Solidi (2006) 10.1002/pssc.200567112

[18]

Biju "Estimation of lattice strain in nanocrystalline silver from X-ray diffraction line broadening" J. Mater. Sci. (2008) 10.1007/s10853-007-2300-8

[19]

Venkateswarlu "X-ray peak broadening studies of nanocrystalline hydroxyapatite by Williamson–Hall analysis" Phys. B (2010) 10.1016/j.physb.2010.07.020

[20]

Fang "An investigation on morphology and structure of Cu–Cr alloy powders prepared by mechanical milling and alloying" Powder Technol. (2015) 10.1016/j.powtec.2014.10.010

[21]

Kumar "Structural evolution during milling, annealing, and rapid consolidation of nanocrystalline Fe–10Cr–3Al powder" Materials (2017)

[22]

(2001)

[23]

Juárez "The effects of process control agents on mechanical alloying behavior of a Fe–Zr based alloy" J. Alloys Compd. (2007) 10.1016/j.jallcom.2006.08.108

[24]

Cabeza "Development of a high wear resistance aluminium matrix nanoreinforced composite" Surf. Interface Anal. (2012) 10.1002/sia.4925

[25]

Carreño-Gallardo "Dispersion of silicon carbide nanoparticles in an AA2024 aluminum alloy by a high-energy ball mill" J. Alloys Compd. (2014) 10.1016/j.jallcom.2013.03.232

[26]

Suryanarayana (1998)

[27]

Dieter (1988)

[28]

Klinger "CrysTBox - Crystallographic Toolbox. Institute of Physics of the Czech" Acad. Sci. (2015)

Metrics

55

Citations

28

References

Details

Published: Feb 01, 2019
Vol/Issue: 343
Pages: 19-28
License: View

Authors

Cite This Article

I. Feijoo, M. Cabeza, P. Merino, et al. (2019). Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadening. Powder Technology, 343, 19-28. https://doi.org/10.1016/j.powtec.2018.11.010

Estimation of crystallite size and lattice strain in nano-sized TiC particle-reinforced 6005A aluminium alloy from X-ray diffraction line broadening

You May Also Like