Fully-resolved 3D premixed H2/air flames in a micro-combustor partially filled with porous media: Effects of detailed pore structures

Qingqing Li; Jun Li; Junrui Shi

doi:10.1016/j.proci.2022.06.005

journal article Jan 01, 2023

Fully-resolved 3D premixed H2/air flames in a micro-combustor partially filled with porous media: Effects of detailed pore structures

Qingqing Li

Jun Li

Junrui Shi

Proceedings of the Combustion Institute Vol. 39 No. 4 pp. 5571-5580 · Elsevier BV

View at Publisher Save 10.1016/j.proci.2022.06.005

Topics

No keywords indexed for this article. Browse by subject →

References

32

[1]

Epstein "Macro power from micro machinery" Science (1997) 10.1126/science.276.5316.1211

[2]

Ju "Microscale combustion: technology development and fundamental research" Prog. Energy Combust. Sci. (2011) 10.1016/j.pecs.2011.03.001

[3]

Ellzey "Heat recirculating reactors: fundamental research and applications" Prog. Energy Combust. Sci. (2019) 10.1016/j.pecs.2018.12.001

[4]

Sobhani "Modulation of heat transfer for extended flame stabilization in porous media burners via topology gradation" Proc. Combust. Inst. (2019) 10.1016/j.proci.2018.05.155

[5]

Chua "Fundamental experiment and numerical analysis of a modular microcombustor with silicon carbide porous medium" Ind. Eng. Chem. Res. (2012) 10.1021/ie203017g

[6]

Zhdanok "Superadiabatic combustion of methane air mixtures under filtration in a packed bed" Combust. Flame (1995) 10.1016/0010-2180(94)00064-y

[7]

Henneke "Modeling of filtration combustion in a packed bed" Combust. Flame (1999) 10.1016/s0010-2180(98)00129-1

[8]

Barra "Heat recirculation and heat transfer in porous burners" Combust. Flame (2004) 10.1016/j.combustflame.2004.02.007

[9]

Yang "Filtration combustion of methane in high-porosity micro-fibrous media" Combust. Sci. Technol. (2009) 10.1080/00102200802646748

[10]

Fursenko "Characteristic regimes of premixed gas combustion in high-porosity micro-fibrous porous media" Combust. Theor. Model. (2010) 10.1080/13647830.2010.502249

[11]

Sahraoui "Direct simulation vs volume-averaged treatment of adiabatic, premixed flame in a porous medium" Int. J. Heat Mass Transf. (1994) 10.1016/0017-9310(94)90338-7

[12]

Fursenko "Pore-scale flame dynamics in a one-layer porous burner" Combust. Flame (2022) 10.1016/j.combustflame.2021.111711

[13]

Sirotkin "Flame anchoring regime of filtrational gas combustion: theory and experiment" Proc. Combust. Inst. (2017) 10.1016/j.proci.2016.06.006

[14]

Dunnmon "An investigation of internal flame structure in porous media combustion via X-ray computed tomography" Proc. Combust. Inst. (2017) 10.1016/j.proci.2016.06.188

[15]

Djordjevic "A numerical investigation of the flame stability in porous burners employing various ceramic sponge-like structures" Chem. Eng. Sci. (2011) 10.1016/j.ces.2010.11.012

[16]

Bedoya "Experimental study, 1D volume-averaged calculations and 3D direct pore level simulations of the flame stabilization in porous inert media at elevated pressure" Combust. Flame (2015) 10.1016/j.combustflame.2015.07.012

[17]

Ferguson "Pore-resolved simulations of porous media combustion with conjugate heat transfer" Proc. Combust. Inst. (2021) 10.1016/j.proci.2020.06.064

[18]

Three-dimensional pore-scale numerical simulation of methane-air combustion in inert porous media under the conditions of upstream and downstream combustion wave propagation through the media

Igor Yakovlev, Sergey Zambalov

Combustion and Flame 2019 10.1016/j.combustflame.2019.07.018

[19]

Yakovlev "Pore-scale study of complex flame stabilization phenomena in thin-layered radial porous burner" Combust. Flame (2021) 10.1016/j.combustflame.2021.111468

[20]

Norton "A CFD study of propane/air microflame stability" Combust. Flame (2004) 10.1016/j.combustflame.2004.04.004

[21]

Pan "Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor" Appl. Energy (2015) 10.1016/j.apenergy.2014.12.049

[22]

Li "Numerical study on heat recirculation in a porous micro-combustor" Combust. Flame (2016) 10.1016/j.combustflame.2016.06.007

[23]

Li "Effects of heat transfer on flame stability limits in a planar micro-combustor partially filled with porous medium" Proc. Combust. Inst. (2019) 10.1016/j.proci.2018.06.023

[24]

Li "Fundamental numerical analysis of a porous micro-combustor filled with alumina spheres: pore-scale vs. volume-averaged models" Appl. Sci. Basel (2021) 10.3390/app11167496

[25]

Berglund "Finite rate chemistry large-eddy simulation of self-ignition in supersonic combustion ramjet" AIAA J. (2010) 10.2514/1.43746

[26]

Keshtkar "Theoretical analysis of porous radiant burners under 2-D radiation field using discrete ordinates method" J. Quant. Spectrosc. Radiat. Transfer (2009) 10.1016/j.jqsrt.2009.04.007

[27]

Hashemi "Flame stability analysis of the premixed methane-air combustion in a two-layer porous media burner by numerical simulation" Fuel (2017) 10.1016/j.fuel.2017.04.008

[28]

Gómez "CFD simulation of a solar radiation absorber" Int. J. Heat Mass Transf. (2013) 10.1016/j.ijheatmasstransfer.2012.09.061

[29]

(2016)

[30]

(2006)

[31]

Shi "Two-dimensional pore-level simulation of low-velocity filtration combustion in a packed bed with staggered arrangements of discrete cylinders" Combust. Sci. Technol. (2017) 10.1080/00102202.2017.1282472

[32]

Kedia "Mechanisms of stabilization and blowoff of a premixed flame downstream of a heat-conducting perforated plate" Combust. Flame (2012) 10.1016/j.combustflame.2011.10.014

Cited By

13

Numerical simulation of high-velocity combustion and pollutant emission characteristics in ordered porous media

Ke Xu, Ruifeng Dou · 2026

Applied Thermal Engineering

Metrics

13

Citations

32

References

Details

Published: Jan 01, 2023
Vol/Issue: 39(4)
Pages: 5571-5580
License: View

Authors

ShanghaiTech University

J

Junrui Shi

Funding

National Natural Science Foundation of China Award: 51776136

Cite This Article

Qingqing Li, Jun Li, Junrui Shi (2023). Fully-resolved 3D premixed H2/air flames in a micro-combustor partially filled with porous media: Effects of detailed pore structures. Proceedings of the Combustion Institute, 39(4), 5571-5580. https://doi.org/10.1016/j.proci.2022.06.005

Fully-resolved 3D premixed H2/air flames in a micro-combustor partially filled with porous media: Effects of detailed pore structures

You May Also Like