Theoretical coatability properties of modified woods derived from contact angle, surface free energy and surface tension measurements and experimental correlation

Adefemi Adebisi Alade; Hannes Stolze; Christoph Hoette; Holger Militz

doi:10.1016/j.rsurfi.2025.100514

journal article Open Access May 01, 2025

Theoretical coatability properties of modified woods derived from contact angle, surface free energy and surface tension measurements and experimental correlation

Adefemi Adebisi Alade

Hannes Stolze Christoph Hoette Holger Militz

Results in Surfaces and Interfaces Vol. 19 pp. 100514 · Elsevier BV

View at Publisher Save 10.1016/j.rsurfi.2025.100514

Topics

No keywords indexed for this article. Browse by subject →

References

48

[1]

Alade "Coatings adhesion on chemically modified Scots pine (pinus sylvestris L.) woods" Forests (2024) 10.3390/f15030526

[2]

Žigon "The influence of mechanical, physical and chemical pre-treatment processes of wood surface on the relationships of wood with a waterborne opaque coating" Prog. Org. Coating (2022) 10.1016/j.porgcoat.2021.106574

[3]

Altgen "Thermally modified Scots pine and Norway spruce wood as substrate for coating systems" J. Coating Technol. Res. (2017) 10.1007/s11998-016-9871-8

[4]

Miklečić "Weathering performance of surface of thermally modified wood finished with nanoparticles-modified waterborne polyacrylate coatings" Appl. Surf. Sci. (2017) 10.1016/j.apsusc.2017.03.011

[5]

de Moura "Evaluation of coating performance and color stability on thermally rectified Eucalyptus grandis and Pinus caribaea var. hondurensis woods" Wood Res. (2013)

[6]

Deka "Photo-degradation of water borne acrylic coated modified and non-modified wood during artificial light exposure" Bioresources (2008) 10.15376/biores.3.2.346-362

[7]

Prieto (2018)

[8]

Bulian (2009)

[9]

Nejad "Exterior wood coatings" (2017)

[10]

Sandberg (2021)

[11]

Zelinka "Review of wood modification and wood functionalization technologies" Forests (2022) 10.3390/f13071004

[12]

Dong "Environmentally benign wood modifications: a review" ACS Sustainable Chem. Eng. (2020) 10.1021/acssuschemeng.0c00342

[13]

Petrič "Wettability of waterborne coatings on chemically and thermally modified pine wood" J. Coating Technol. Res. (2007) 10.1007/s11998-007-9023-2

[14]

Alade "Effects of preservative impregnations on wettability and surface free energy properties of Eucalyptus grandis wood" (2023)

[15]

Azizian "Advanced oil spill decontamination techniques" (2019) 10.1016/b978-0-12-814178-6.00012-1

[16]

Alade "A review of the effects of wood preservative impregnation on adhesive bonding and joint performance" J. Adhes. Sci. Technol. (2021)

[17]

RESISTANCE OF SOLID SURFACES TO WETTING BY WATER

Robert N. Wenzel

Industrial & Engineering Chemistry 1936 10.1021/ie50320a024

[18]

Wenzel "Surface roughness and contact angle" J. Phys. Chem. (1949) 10.1021/j150474a015

[19]

Cassie "Wettability of porous surfaces" Trans. Faraday Soc. (1944) 10.1039/tf9444000546

[20]

de Gennes "The dynamics of wetting" (1991)

[21]

Shanahan "Wetting of solids" (2011)

[22]

Reiter "Spreading of liquids on substrates" (2011)

[23]

Gindl "Wood surface energy and time dependence of wettability: a comparison of different wood surfaces using an acid-base approach" Holzforschung (2001) 10.1515/hf.2001.071

[24]

Butt "Theory of adhesion and its practical implications" J. Facul. Eng. Technol. (2008)

[25]

Kúdela "Adhesion of coating materials to wood" J. Adhes. Sci. Technol. (2006) 10.1163/156856106777638725

[26]

Liptáková "Study of the system wood – coating material. I" Wood – Liquid Coating Material (2000)

[27]

Mellor

[28]

Liptáková "Problems concerning the equilibrium state on the wood-liquid phase boundary" Wood structure and properties (1998)

[29]

Estimation of the surface free energy of polymers

D. K. Owens, R. C. Wendt

Journal of Applied Polymer Science 1969 10.1002/app.1969.070130815

[30]

(2013)

[31]

(2016)

[32]

Qin "Wettability of sanded and aged fast-growing poplar wood surfaces: I. Surface free energy" Bioresources (2015)

[33]

Yuan "Contact angle and wetting properties" (2013)

[34]

Thybring "Wood modification as a tool to understand moisture in wood" Forests (2021) 10.3390/f12030372

[35]

Beck "Accessibility of hydroxyl groups in anhydride modified wood as measured by deuterium exchange and saponification" Holzforschung (2018) 10.1515/hf-2017-0059

[36]

Popescu "The water vapour sorption behaviour of acetylated birch wood: how acetylation affects the sorption isotherm and accessible hydroxyl content" J. Mater. Sci. (2014) 10.1007/s10853-013-7937-x

[37]

Papadopoulos "Analysis of the swelling behaviour of chemically modified softwood: a novel approach" Holz Roh Werkst (2004) 10.1007/s00107-003-0448-8

[38]

Hill "An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood" Int. Biodeterior. Biodegrad. (2005) 10.1016/j.ibiod.2004.07.003

[39]

Mantanis "Chemical modification of wood by acetylation or furfurylation: a review of the present scaled-up technologies" Bioresources (2017) 10.15376/biores.12.2.mantanis

[40]

Lande "Furfurylation of wood: chemistry, properties, and commercialization" (2008)

[41]

Mubarok "Beech wood modification based on in situ esterification with sorbitol and citric acid" Wood Sci. Technol. (2020) 10.1007/s00226-020-01172-7

[42]

Kurkowiak "Biological durability and wood–water interactions of sorbitol and citric acid (SorCA) modified wood" J. Wood Sci. (2023) 10.1186/s10086-023-02108-y

[43]

Kurkowiak "Sorption behavior and swelling of citric acid and sorbitol (SorCA) treated wood" Holzforschung (2021) 10.1515/hf-2021-0068

[44]

Emmerich "Sorption behavior and hydroxyl accessibility of wood treated with different cyclic N-methylol compounds" J. Mater. Sci. (2020) 10.1007/s10853-020-05224-y

[45]

Avramidis "Plasma treatment of wood and wood-based materials to generate hydrophilic or hydrophobic surface characteristics" Wood Mater. Sci. Eng. (2009) 10.1080/17480270903281642

[46]

De Meijer "A review of interfacial aspects in wood coatings: wetting, surface energy, substrate penetration and adhesion" (2004)

[47]

Miklečić "Influence of wood surface preparation on roughness, wettability and coating adhesion of unmodified and thermally modified wood" Drvna Ind. (2022) 10.5552/drvind.2022.0016

[48]

Schober "Correlation coefficients: appropriate use and interpretation" Anesth. Analg. (2018) 10.1213/ane.0000000000002864

Metrics

1

Citations

48

References

Details

Published: May 01, 2025
Vol/Issue: 19
Pages: 100514
License: View

Authors

A

Adefemi Adebisi Alade

Wood Biology and Wood Products , University of Göttingen , Goettingen , Germany

Funding

Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz

Bundesministerium für Ernährung und Landwirtschaft

Fachagentur Nachwachsende Rohstoffe eV Award: 2220WK01E3

Cite This Article

Adefemi Adebisi Alade, Hannes Stolze, Christoph Hoette, et al. (2025). Theoretical coatability properties of modified woods derived from contact angle, surface free energy and surface tension measurements and experimental correlation. Results in Surfaces and Interfaces, 19, 100514. https://doi.org/10.1016/j.rsurfi.2025.100514

Theoretical coatability properties of modified woods derived from contact angle, surface free energy and surface tension measurements and experimental correlation

You May Also Like